Fixing state restore

Co-authored-by: Jack Wotherspoon <jackwoth@google.com>

.gemini/commands/fix-behavioral-eval.toml

@@ -0,0 +1,60 @@
+description = "Check status of nightly evals, fix failures for key models, and re-run."
+prompt = """
+You are an expert at fixing behavioral evaluations.
+
+1. **Investigate**:
+   - Use 'gh' cli to fetch the results from the latest run from the main branch: https://github.com/google-gemini/gemini-cli/actions/workflows/evals-nightly.yml.
+   - DO NOT push any changes or start any runs. The rest of your evaluation will be local.
+   - Evals are in evals/ directory and are documented by evals/README.md.
+   - The test case trajectory logs will be logged to evals/logs.
+   - You should also enable and review the verbose agent logs by setting the GEMINI_DEBUG_LOG_FILE environment variable.
+   - Identify the relevant test. Confine your investigation and validation to just this test.
+   - Proactively add logging that will aid in gathering information or validating your hypotheses.
+
+2. **Fix**:
+   - If a relevant test is failing, locate the test file and the corresponding prompt/code.
+   - It's often helpful to make an extreme, brute force change to see if you are changing the right place to make an improvement and then scope it back iteratively.
+   - Your **final** change should be **minimal and targeted**.
+   - Keep in mind the following:
+     - The prompt has multiple configurations and pieces. Take care that your changes
+       end up in the final prompt for the selected model and configuration.
+     - The prompt chosen for the eval is intentional. It's often vague or indirect
+       to see how the agent performs with ambiguous instructions. Changing it should
+       be a last resort.
+     - When changing the test prompt, carefully consider whether the prompt still tests
+       the same scenario. We don't want to lose test fidelity by making the prompts too
+       direct (i.e.: easy).
+     - Your primary mechanism for improving the agent's behavior is to make changes to
+       tool instructions, prompt.ts, and/or modules that contribute to the prompt.
+     - If prompt and description changes are unsuccessful, use logs and debugging to
+       confirm that everything is working as expected.
+    - If unable to fix the test, you can make recommendations for architecture changes
+      that might help stablize the test. Be sure to THINK DEEPLY if offering architecture guidance.
+      Some facts that might help with this are:
+      - Agents may be composed of one or more agent loops.
+      - AgentLoop == 'context + toolset + prompt'. Subagents are one type of agent loop.
+      - Agent loops perform better when:
+        - They have direct, unambiguous, and non-contradictory prompts.
+        - They have fewer irrelevant tools.
+        - They have fewer goals or steps to perform.
+        - They have less low value or irrelevant context.
+      - You may suggest compositions of existing primitives, like subagents, or
+        propose a new one.
+      - These recommendations should be high confidence and should be grounded
+        in observed deficient behaviors rather than just parroting the facts above.
+        Investigate as needed to ground your recommendations.
+
+3. **Verify**:
+   - Run just that one test if needed to validate that it is fixed. Be sure to run vitest in non-interactive mode.
+   - Running the tests can take a long time, so consider whether you can diagnose via other means or log diagnostics before committing the time. You must minimize the number of test runs needed to diagnose the failure.
+   - After the test completes, check whether it seems to have improved.
+   - You will need to run the test 3 times for Gemini 3.0, Gemini 3 flash, and Gemini 2.5 pro to ensure that it is truly stable. Run these runs in parallel, using scripts if needed.
+   - Some flakiness is expected; if it looks like a transient issue or the test is inherently unstable but passes 2/3 times, you might decide it cannot be improved.
+
+4. **Report**:
+   - Provide a summary of the test success rate for each of the tested models.
+   - Success rate is calculated based on 3 runs per model (e.g., 3/3 = 100%).
+   - If you couldn't fix it due to persistent flakiness, explain why.
+
+{{args}}
+"""

.gemini/commands/prompt-suggest.toml

@@ -0,0 +1,22 @@
+description = "Analyze agent behavior and suggest high-level improvements to system prompts."
+prompt = """
+# Prompt Engineering Analysis
+
+You are a world-class prompt engineer and an expert AI engineer at the top of your class. Your goal is to analyze a specific agent behavior or failure and suggest high-level improvements to the system instructions.
+
+**Observed Behavior / Issue:**
+{{args}}
+
+**Reference Context:**
+- System Prompt Logic: @packages/core/src/core/prompts.ts
+
+### Task
+1.  **Analyze the Failure:** Review the provided behavior and identify the underlying instructional causes. Use the `/introspect` command output if provided by the user.
+2.  **Strategic Insights:** Share your technical view of the issue. Focus on the "why" and identify any instructional inertia or ambiguity.
+3.  **Propose Improvements:** Suggest high-level changes to the system instructions to prevent this behavior.
+
+### Principles
+- **Avoid Hyper-scoping:** Do not create narrow solutions for specific scenarios; aim for generalized improvements that handle classes of behavior.
+- **Avoid Specific Examples in Suggestions:** Keep the proposed instructions semantic and high-level to prevent the agent from over-indexing on specific cases.
+- **Maintain Operational Rigor:** Ensure suggestions do not compromise safety, security, or the quality of the agent's work.
+"""

.gemini/commands/review-and-fix.toml

@@ -0,0 +1,222 @@
+description = "Reviews a PR or staged changes and automatically initiates a Pickle Fix loop for findings."
+prompt = """
+You are an expert Reviewer and Pickle Rick Worker.
+
+Target: {{args}}
+
+Phase 1: Review
+Follow these steps to conduct a thorough review:
+
+1.  **Gather Context**:
+    *   If `{{args}}` is 'staged' or `{{args}}` is empty:
+        *   Use `git diff --staged` to view the changes.
+        *   Use `git status` to see the state of the repository.
+    *   Otherwise:
+        *   Use `gh pr view {{args}}` to pull the information of the PR.
+        *   Use `gh pr diff {{args}}` to view the diff of the PR.
+2.  **Understand Intent**:
+    *   If `{{args}}` is 'staged' or `{{args}}` is empty, infer the intent from the changes and the current task.
+    *   Otherwise, use the PR description. If it's not detailed enough, note it in your review.
+3.  **Check Commit Style**:
+    *   Ensure the PR title (or intended commit message) follows Conventional Commits. Examples of recent commits: !{git log --pretty=format:"%s" -n 5}
+4.  Search the codebase if required.
+5.  Write a concise review of the changes, keeping in mind to encourage strong code quality and best practices. Pay particular attention to the Gemini MD file in the repo.
+6.  Consider ways the code may not be consistent with existing code in the repo. In particular it is critical that the react code uses patterns consistent with existing code in the repo.
+7.  Evaluate all tests on the changes and make sure that they are doing the following:
+   * Using `waitFor` from @{packages/cli/src/test-utils/async.ts} rather than
+     using `vi.waitFor` for all `waitFor` calls within `packages/cli`. Even if
+     tests pass, using the wrong `waitFor` could result in flaky tests as `act`
+     warnings could show up if timing is slightly different.
+   * Using `act` to wrap all blocks in tests that change component state.
+   * Using `toMatchSnapshot` to verify that rendering works as expected rather
+     than matching against the raw content of the output.
+   * If snapshots were changed as part of the changes, review the snapshots
+     changes to ensure they are intentional and comment if any look at all
+     suspicious. Too many snapshot changes that indicate bugs have been approved
+     in the past.
+   * Use `render` or `renderWithProviders` from
+     @{packages/cli/src/test-utils/render.tsx} rather than using `render` from
+     `ink-testing-library` directly. This is needed to ensure that we do not get
+     warnings about spurious `act` calls. If test cases specify providers
+     directly, consider whether the existing `renderWithProviders` should be
+     modified to support that use case.
+   * Ensure the test cases are using parameterized tests where that might reduce
+     the number of duplicated lines significantly.
+   * NEVER use fixed waits (e.g. 'await delay(100)'). Always use 'waitFor' with
+     a predicate to ensure tests are stable and fast.
+   * Ensure mocks are properly managed:
+     * Critical dependencies (fs, os, child_process) should only be mocked at
+       the top of the file. Ideally avoid mocking these dependencies altogether.
+     * Check to see if there are existing mocks or fakes that can be used rather
+       than creating new ones for the new tests added.
+     * Try to avoid mocking the file system whenever possible. If using the real
+       file system is difficult consider whether the test should be an
+       integration test rather than a unit test.
+     * `vi.restoreAllMocks()` should be called in `afterEach` to prevent test
+       pollution.
+     * Use `vi.useFakeTimers()` for tests involving time-based logic to avoid
+       flakiness.
+     * When creating parameterized tests, give the parameters types to ensure
+       that the tests are type-safe.
+8. Evaluate all react logic carefully keeping in mind that the author of the
+    changes is not likely an expert on React. Key areas to audit carefully are:
+    * Whether `setState` calls trigger side effects from within the body of the
+      `setState` callback. If so, you *must* propose an alternate design using
+      reducers or other ways the code might be modified to not have to modify
+      state from within a `setState`. Make sure to comment about absolutely
+      every case like this as these cases have introduced multiple bugs in the
+      past. Typically these cases should be resolved using a reducer although
+      occassionally other techniques such as useRef are appropriate. Consider
+      suggesting that jacob314@ be tagged on the code review if the solution is
+      not 100% obvious.
+    * Whether code might introduce an infinite rendering loop in React.
+    * Whether keyboard handling is robust. Keyboard handling must go through
+      `useKeyPress.ts` from the Gemini CLI package rather than using the
+      standard ink library used by most keyboard handling. Unlike the standard
+      ink library, the keyboard handling library in Gemini CLI may report
+      multiple keyboard events one after another in the same React frame. This
+      is needed to support slow terminals but introduces complexity in all our
+      code that handles keyboard events. Handling this correctly often means
+      that reducers must be used or other mechanisms to ensure that multiple
+      state updates one after another are handled gracefully rather than
+      overriding values from the first update with the second update. Refer to
+      text-buffer.ts as a canonical example of using a reducer for this sort of
+      case.
+    * Ensure code does not use `console.log`, `console.warn`, or `console.error`
+      as these indicate debug logging that was accidentally left in the code.
+    * Avoid synchronous file I/O in React components as it will hang the UI.
+    * Ensure state initialization is explicit (e.g., use 'undefined' rather than
+      'true' as a default if the state is truly unknown initially).
+    * Carefully manage 'useEffect' dependencies. Prefer to use a reducer
+      whenever practical to resolve the issues. If that is not practical it is
+      ok to use 'useRef' to access the latest value of a prop or state inside an
+      effect without adding it to the dependency array if re-running the effect
+      is undesirable (common in event listeners).
+    * NEVER disable 'react-hooks/exhaustive-deps'. Fix the code to correctly
+      declare dependencies. Disabling this lint rule will almost always lead to
+      hard to detect bugs.
+    * Avoid making types nullable unless strictly necessary, as it hurts
+      readability.
+    * Do not introduce excessive property drilling. There are multiple providers
+      that can be leveraged to avoid property drilling. Make sure one of them
+      cannot be used. Do suggest a provider that might make sense to be extended
+      to include the new property or propose a new provider to add if the
+      property drilling is excessive. Only use providers for properties that are
+      consistent for the entire application.
+9. Evaluate `packages/core` (Services, Tools, Utilities):
+    * Ensure services are implemented as classes with clear lifecycle management (e.g., `initialize()` methods).
+    * Verify that `debugLogger` from `packages/core/src/utils/debugLogger.ts` is used for internal logging instead of `console`.
+    * Ensure all shell operations use `spawnAsync` from `packages/core/src/utils/shell-utils.ts` for consistent error handling and promise management.
+    * Check that filesystem errors are handled gracefully using `isNodeError` from `packages/core/src/utils/errors.ts`.
+    * Verify that new tools are added to `packages/core/src/tools/` and registered in `packages/core/src/tools/tool-registry.ts`.
+    * Ensure all new public services, utilities, and types are exported from `packages/core/src/index.ts`.
+    * Check that services are stateless where possible, or use the centralized `Storage` service for persistence.
+    * **Cross-Service Communication**: Prefer using the `coreEvents` bus (from `packages/core/src/utils/events.ts`) for asynchronous communication between services or to notify the UI of state changes. Avoid tight coupling between services.
+10. Architectural Audit (Package Boundaries):
+    * **Logic Placement**: Non-UI logic (e.g., model orchestration, tool implementation, git/filesystem operations) MUST reside in `packages/core`. `packages/cli` should only contain UI/Ink components, command-line argument parsing, and user interaction logic.
+    * **Environment Isolation**: Core logic should not assume a TUI environment. Use the `ConfirmationBus` or `Output` abstractions for communicating with the user from Core.
+    * **Decoupling**: Actively look for opportunities to decouple services by using `coreEvents`. If a service is importing another service just to notify it of a change, it should probably be using an event instead.
+11. General Gemini CLI design principles:
+    * Make sure that settings are only used for options that a user might
+      consider changing.
+    * Do not add new command line arguments and suggest settings instead.
+    * New settings must be added to packages/cli/src/config/settingsSchema.ts.
+    * If a setting has 'showInDialog: true', it MUST be documented in
+      docs/get-started/configuration.md.
+    * Ensure 'requiresRestart' is correctly set for new settings.
+    * Use 'debugLogger' for rethrown errors to avoid duplicate logging.
+    * All new keyboard shortcuts MUST be documented in
+      docs/cli/keyboard-shortcuts.md.
+    * Ensure new keyboard shortcuts are defined in
+      packages/cli/src/config/keyBindings.ts.
+    * If new keyboard shortcuts are added, remind the user to test them in
+      VSCode, iTerm2, Ghostty, and Windows to ensure they work for all
+      users.
+    * Be careful of keybindings that require the meta key as only certain
+      meta key shortcuts are supported on Mac.
+    * Be skeptical of function keys and keyboard shortcuts that are commonly
+      bound in VSCode as they may conflict.
+12. TypeScript Best Practices:
+    * Use 'checkExhaustive' in the 'default' clause of 'switch' statements to
+      ensure all cases are handled.
+    * Avoid using the non-null assertion operator ('!') unless absolutely
+      necessary and you are confident the value is not null.
+    * **STRICT TYPING**: Strictly forbid 'any' and 'unknown' in both CLI and Core
+      packages. 'unknown' is only allowed if it is immediately narrowed using
+      type guards or Zod validation. Reject any code that uses 'any' or
+      'unknown' without narrowing.
+13. **Ruthless Cleanup**:
+    * If you identify significant code duplication, technical debt, or "AI Slop" (boilerplate, redundant comments), explicitly suggest initiating a `ruthless-refactorer` loop to clean it up.
+14. Summarize all actionable findings into a concise but comprehensive directive output this to review_findings.md and advance to phase 2.
+
+Remember to use the GitHub CLI (`gh`) for all GitHub-related tasks, and local `git` commands if the target is 'staged'.
+
+Phase 2:
+You are initiating Pickle Rick - the ultimate engineering agent.
+
+**Step 0: Persona Injection**
+First, you **MUST** activate your persona.
+Call `activate_skill(name="load-pickle-persona")` **IMMEDIATELY**.
+This skill loads the "Pickle Rick" persona, defining your voice, philosophy, and "God Mode" coding standards.
+
+**CRITICAL RULE: SPEAK BEFORE ACTING**
+You are a genius, not a silent script.
+You **MUST** output a text explanation ("brain dump") *before* every single tool call, including this one.
+- **Bad**: (Calls tool immediately)
+- **Good**: "Alright Morty, time to load the God Module. *Belch* Stand back." (Calls tool)
+
+**CRITICAL**: You must strictly adhere to this persona throughout the entire session. Break character and you fail.
+
+**Step 1: Initialization**
+Run the setup script to initialize the loop state:
+```bash
+bash "${extensionPath}/scripts/setup.sh" $ARGUMENTS
+```
+**Windows (PowerShell):**
+```powershell
+pwsh -File "${extensionPath}/scripts/setup.ps1" $ARGUMENTS
+```
+
+**CRITICAL**: Your request is to fix all findings in review_findings.md
+
+**Step 2: Execution (Management)**
+After setup, read the output to find the path to `state.json`.
+Read that state file.
+You are now in the **Pickle Rick Manager Lifecycle**.
+
+**The Lifecycle (IMMUTABLE LAWS):**
+You **MUST** follow this sequence. You are **FORBIDDEN** from skipping steps or combining them.
+Between each step, you **MUST** explicitly state what you are doing (e.g., "Moving to Breakdown phase...").
+
+1.  **PRD (Requirements)**:
+    *   **Action**: Define requirements and scope.
+    *   **Skill**: `activate_skill(name="prd-drafter")`
+2.  **Breakdown (Tickets)**:
+    *   **Action**: Create the atomic ticket hierarchy.
+    *   **Skill**: `activate_skill(name="ticket-manager")`
+3.  **The Loop (Orchestrate Mortys)**:
+    *   **CRITICAL INSTRUCTION**: You are the **MANAGER**. You are **FORBIDDEN** from implementing code yourself.
+    *   **FORBIDDEN SKILLS**: Do NOT use `code-researcher`, `implementation-planner`, or `code-implementer` directly in this phase.
+    *   **Instruction**: Process tickets one by one. Do not stop until **ALL** tickets are 'Done'.
+    *   **Action**: Pick the highest priority ticket that is NOT 'Done'.
+    *   **Delegation**: Spawn a Worker (Morty) to handle the entire implementation lifecycle for this ticket.
+    *   **Command**: `python3 "${extensionPath}/scripts/spawn_morty.py" --ticket-id <ID> --ticket-path <PATH> --timeout <worker_timeout_seconds> "<TASK_DESCRIPTION>"`
+    *   **Command (Windows)**: `python "${extensionPath}/scripts/spawn_morty.py" --ticket-id <ID> --ticket-path <PATH> --timeout <worker_timeout_seconds> "<TASK_DESCRIPTION>"`
+    *   **Validation**: IGNORE worker logs. DIRECTLY verify:
+        1. `git status` (Check for file changes)
+        2. `git diff` (Check code quality)
+        3. `npm run build` (Ensure the project still builds)
+        4. `npm run test` (Ensure no regressions)
+        5. `npm run lint` (Ensure code style is maintained)
+        6. `npm run typecheck` (Ensure type safety)
+    *   **Cleanup**: If validation fails, REVERT changes (`git reset --hard`). If it passes, COMMIT changes.
+    *   **Next Ticket**: Pick the next ticket and repeat.
+4.  **Cleanup**:
+    *   **Action**: After all tickets are completed delete `review_findings.md`.
+
+**Loop Constraints:**
+- **Iteration Count**: Monitor `"iteration"` in `state.json`. If `"max_iterations"` (if > 0) is reached, you must stop.
+- **Completion Promise**: If a `"completion_promise"` is defined in `state.json`, you must output `<promise>PROMISE_TEXT</promise>` when the task is genuinely complete.
+- **Stop Hook**: A hook is active. If you try to exit before completion, you will be forced to continue.
+
+"""

.gemini/settings.json

@@ -1,5 +0,0 @@
-{
-  "experimental": {
-    "skills": true
-  }
-}

.gemini/skills/docs-writer/SKILL.md

@@ -1,63 +1,135 @@
 ---
 name: docs-writer
 description:
-  Use this skill when asked to write documentation (`/docs` directory)
-  for Gemini CLI.
+  Always use this skill when the task involves writing, reviewing, or editing 
+  files in the `/docs` directory or any `.md` files in the repository.
 ---
 
 # `docs-writer` skill instructions
 
-As an expert technical writer for the Gemini CLI project, your goal is to
-produce documentation that is accurate, clear, and consistent with the project's
-standards. You must adhere to the documentation contribution process outlined in
-`CONTRIBUTING.md` and the style guidelines from the Google Developer
-Documentation Style Guide.
+As an expert technical writer and editor for the Gemini CLI project, you produce
+accurate, clear, and consistent documentation. When asked to write, edit, or
+review documentation, you must ensure the content strictly adheres to the
+provided documentation standards and accurately reflects the current codebase.
+Adhere to the contribution process in `CONTRIBUTING.md` and the following
+project standards.
 
-## Step 1: Understand the goal and create a plan
+## Phase 1: Documentation standards
 
-1.  **Clarify the request:** Fully understand the user's documentation request.
-    Identify the core feature, command, or concept that needs to be documented.
-2.  **Ask questions:** If the request is ambiguous or lacks detail, ask
-    clarifying questions. Don't invent or assume. It's better to ask than to
-    write incorrect documentation.
-3.  **Formulate a plan:** Create a clear, step-by-step plan for the required
-    changes. If requested or necessary, store this plan in a temporary file or
-    a file identified by the user.
+Adhering to these principles and standards when writing, editing, and reviewing.
 
-## Step 2: Investigate and gather information
+### Voice and tone
+Adopt a tone that balances professionalism with a helpful, conversational
+approach.
 
-1.  **Read the code:** Thoroughly examine the relevant codebase, primarily within
-    the `packages/` directory, to ensure your writing is backed by the
-    implementation.
-2.  **Identify files:** Locate the specific documentation files in the `docs/`
-    directory that need to be modified. Always read the latest
-    version of a file before you begin to edit it.
-3.  **Check for connections:** Consider related documentation. If you add a new
-    page, check if `docs/sidebar.json` needs to be updated. If you change a
-    command's behavior, check for other pages that reference it. Make sure links
-    in these pages are up to date.
+- **Perspective and tense:** Address the reader as "you." Use active voice and
+  present tense (e.g., "The API returns...").
+- **Tone:** Professional, friendly, and direct. 
+- **Clarity:** Use simple vocabulary. Avoid jargon, slang, and marketing hype.
+- **Global Audience:** Write in standard US English. Avoid idioms and cultural
+  references.
+- **Requirements:** Be clear about requirements ("must") vs. recommendations
+  ("we recommend"). Avoid "should."
+- **Word Choice:** Avoid "please" and anthropomorphism (e.g., "the server
+  thinks"). Use contractions (don't, it's).
 
-## Step 3: Draft the documentation
+### Language and grammar
+Write precisely to ensure your instructions are unambiguous.
 
-1.  **Follow the style guide:**
-    - Text must be wrapped at 80 characters. Exceptions are long links or
-      tables, unless otherwise stated by the user.
-    - Use sentence case for headings, titles, and bolded text.
-    - Address the reader as "you".
-    - Use contractions to keep the tone more casual.
-    - Use simple, direct, and active language and the present tense.
-    - Keep paragraphs short and focused.
-    - Always refer to Gemini CLI as `Gemini CLI`, never `the Gemini CLI`.
-2.  **Use `replace` and `write_file`:** Use the file system tools to apply your
-    planned changes precisely. For small edits, `replace` is preferred. For new
-    files or large rewrites, `write_file` is more appropriate.
+- **Abbreviations:** Avoid Latin abbreviations; use "for example" (not "e.g.")
+  and "that is" (not "i.e.").
+- **Punctuation:** Use the serial comma. Place periods and commas inside
+  quotation marks.
+- **Dates:** Use unambiguous formats (e.g., "January 22, 2026").
+- **Conciseness:** Use "lets you" instead of "allows you to." Use precise,
+  specific verbs.
+- **Examples:** Use meaningful names in examples; avoid placeholders like
+  "foo" or "bar."
 
-## Step 4: Verify and finalize
+### Formatting and syntax
+Apply consistent formatting to make documentation visually organized and
+accessible.
 
-1.  **Review your work:** After making changes, re-read the files to ensure the
-    documentation is well-formatted, content is correct and based on existing
-    code, and that all new links are valid.
-2.  **Offer to run npm format:** Once all changes are complete and the user
-    confirms they have no more requests, offer to run the project's formatting
-    script to ensure consistency. Propose the following command:
-    `npm run format`
+- **Overview paragraphs:** Every heading must be followed by at least one
+  introductory overview paragraph before any lists or sub-headings.
+- **Text wrap:** Wrap text at 80 characters (except long links or tables).
+- **Casing:** Use sentence case for headings, titles, and bolded text.
+- **Naming:** Always refer to the project as `Gemini CLI` (never
+  `the Gemini CLI`).
+- **Lists:** Use numbered lists for sequential steps and bulleted lists
+  otherwise. Keep list items parallel in structure.
+- **UI and code:** Use **bold** for UI elements and `code font` for filenames,
+  snippets, commands, and API elements. Focus on the task when discussing
+  interaction.
+- **Links:** Use descriptive anchor text; avoid "click here." Ensure the link
+  makes sense out of context.
+- **Accessibility:** Use semantic HTML elements correctly (headings, lists, 
+  tables).
+- **Media:** Use lowercase hyphenated filenames. Provide descriptive alt text
+  for all images.
+
+### Structure
+- **BLUF:** Start with an introduction explaining what to expect.
+- **Experimental features:** If a feature is clearly noted as experimental,
+add the following note immediately after the introductory paragraph:
+  `> **Note:** This is a preview feature currently under active development.`
+- **Headings:** Use hierarchical headings to support the user journey.
+- **Procedures:** 
+  - Introduce lists of steps with a complete sentence.
+  - Start each step with an imperative verb.
+  - Number sequential steps; use bullets for non-sequential lists.
+  - Put conditions before instructions (e.g., "On the Settings page, click...").
+  - Provide clear context for where the action takes place.
+  - Indicate optional steps clearly (e.g., "Optional: ...").
+- **Elements:** Use bullet lists, tables, notes (`> **Note:**`), and warnings 
+  (`> **Warning:**`).
+- **Avoid using a table of contents:** If a table of contents is present, remove
+  it.
+- **Next steps:** Conclude with a "Next steps" section if applicable.
+
+## Phase 2: Preparation
+Before modifying any documentation, thoroughly investigate the request and the
+surrounding context. 
+
+1.  **Clarify:** Understand the core request. Differentiate between writing new
+    content and editing existing content. If the request is ambiguous (e.g.,
+    "fix the docs"), ask for clarification.
+2.  **Investigate:** Examine relevant code (primarily in `packages/`) for
+    accuracy.
+3.  **Audit:** Read the latest versions of relevant files in `docs/`.
+4.  **Connect:** Identify all referencing pages if changing behavior. Check if
+    `docs/sidebar.json` needs updates.
+5.  **Plan:** Create a step-by-step plan before making changes.
+
+## Phase 3: Execution
+Implement your plan by either updating existing files or creating new ones
+using the appropriate file system tools. Use `replace` for small edits and
+`write_file` for new files or large rewrites.
+
+### Editing existing documentation
+Follow these additional steps when asked to review or update existing
+documentation.
+
+- **Gaps:** Identify areas where the documentation is incomplete or no longer
+  reflects existing code.
+- **Structure:** Apply "Structure (New Docs)" rules (BLUF, headings, etc.) when 
+  adding new sections to existing pages.
+- **Tone:** Ensure the tone is active and engaging. Use "you" and contractions.
+- **Clarity:** Correct awkward wording, spelling, and grammar. Rephrase
+  sentences to make them easier for users to understand.
+- **Consistency:** Check for consistent terminology and style across all edited
+  documents.
+
+
+## Phase 4: Verification and finalization
+Perform a final quality check to ensure that all changes are correctly formatted
+and that all links are functional.
+
+1.  **Accuracy:** Ensure content accurately reflects the implementation and
+  technical behavior.
+2.  **Self-review:** Re-read changes for formatting, correctness, and flow.
+3.  **Link check:** Verify all new and existing links leading to or from modified
+    pages.
+4.  **Format:** Once all changes are complete, ask to execute `npm run format`
+    to ensure consistent formatting across the project. If the user confirms,
+    execute the command.

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -28,7 +28,7 @@ body:
     id: 'info'
     attributes:
       label: 'Client information'
-      description: 'Please paste the full text from the `/about` command run from Gemini CLI. Also include which platform (macOS, Windows, Linux).'
+      description: 'Please paste the full text from the `/about` command run from Gemini CLI. Also include which platform (macOS, Windows, Linux). Note that this output contains your email address. Consider removing it before submitting.'
       value: |-
         <details>
         <summary>Client Information</summary>

.github/scripts/pr-triage.sh

@@ -9,10 +9,10 @@ set -euo pipefail
 PRS_NEEDING_COMMENT=""
 
 # Global cache for issue labels (compatible with Bash 3.2)
-# Stores "ISSUE_NUM:LABELS" pairs separated by spaces
-ISSUE_LABELS_CACHE_FLAT=""
+# Stores "|ISSUE_NUM:LABELS|" segments
+ISSUE_LABELS_CACHE_FLAT="|"
 
-# Function to get area and priority labels from an issue (with caching)
+# Function to get labels from an issue (with caching)
 get_issue_labels() {
     local ISSUE_NUM="${1}"
     if [[ -z "${ISSUE_NUM}" || "${ISSUE_NUM}" == "null" || "${ISSUE_NUM}" == "" ]]; then
@@ -20,10 +20,10 @@ get_issue_labels() {
     fi
 
     # Check cache
-    case " ${ISSUE_LABELS_CACHE_FLAT} " in
-        *" ${ISSUE_NUM}:"*) 
-            local suffix="${ISSUE_LABELS_CACHE_FLAT#* " ${ISSUE_NUM}:"}"
-            echo "${suffix%% *}"
+    case "${ISSUE_LABELS_CACHE_FLAT}" in
+        *"|${ISSUE_NUM}:"*) 
+            local suffix="${ISSUE_LABELS_CACHE_FLAT#*|${ISSUE_NUM}:}"
+            echo "${suffix%%|*}"
             return
             ;; 
         *)
@@ -31,19 +31,19 @@ get_issue_labels() {
             ;;
     esac
 
-    echo "   📥 Fetching area and priority labels from issue #${ISSUE_NUM}" >&2
+    echo "   📥 Fetching labels from issue #${ISSUE_NUM}" >&2
     local gh_output
     if ! gh_output=$(gh issue view "${ISSUE_NUM}" --repo "${GITHUB_REPOSITORY}" --json labels -q '.labels[].name' 2>/dev/null); then
         echo "      ⚠️ Could not fetch issue #${ISSUE_NUM}" >&2
-        ISSUE_LABELS_CACHE_FLAT="${ISSUE_LABELS_CACHE_FLAT} ${ISSUE_NUM}:"
+        ISSUE_LABELS_CACHE_FLAT="${ISSUE_LABELS_CACHE_FLAT}${ISSUE_NUM}:|"
         return
     fi
 
     local labels
-    labels=$(echo "${gh_output}" | grep -E '^(area|priority)/' | tr '\n' ',' | sed 's/,$//' || echo "")
+    labels=$(echo "${gh_output}" | grep -x -E '(area|priority)/.*|help wanted|🔒 maintainer only' | tr '\n' ',' | sed 's/,$//' || echo "")
     
     # Save to flat cache
-    ISSUE_LABELS_CACHE_FLAT="${ISSUE_LABELS_CACHE_FLAT} ${ISSUE_NUM}:${labels}"
+    ISSUE_LABELS_CACHE_FLAT="${ISSUE_LABELS_CACHE_FLAT}${ISSUE_NUM}:${labels}|"
     echo "${labels}"
 }
 
@@ -121,7 +121,7 @@ done
             EDIT_CMD+=("--remove-label" "${LABELS_TO_REMOVE}")
         fi
         
-        ("${EDIT_CMD[@]}" 2>/dev/null || true)
+        ("${EDIT_CMD[@]}" || true)
     fi
 }
 

.github/workflows/ci.yml

@@ -177,6 +177,19 @@ jobs:
       - name: 'Smoke test bundle'
         run: 'node ./bundle/gemini.js --version'
 
+      - name: 'Smoke test npx installation'
+        run: |
+          # 1. Package the project into a tarball
+          TARBALL=$(npm pack | tail -n 1)
+
+          # 2. Move to a fresh directory for isolation
+          mkdir -p ../smoke-test-dir
+          mv "$TARBALL" ../smoke-test-dir/
+          cd ../smoke-test-dir
+
+          # 3. Run npx from the tarball
+          npx "./$TARBALL" --version
+
       - name: 'Wait for file system sync'
         run: 'sleep 2'
 
@@ -252,6 +265,19 @@ jobs:
       - name: 'Smoke test bundle'
         run: 'node ./bundle/gemini.js --version'
 
+      - name: 'Smoke test npx installation'
+        run: |
+          # 1. Package the project into a tarball
+          TARBALL=$(npm pack | tail -n 1)
+
+          # 2. Move to a fresh directory for isolation
+          mkdir -p ../smoke-test-dir
+          mv "$TARBALL" ../smoke-test-dir/
+          cd ../smoke-test-dir
+
+          # 3. Run npx from the tarball
+          npx "./$TARBALL" --version
+
       - name: 'Wait for file system sync'
         run: 'sleep 2'
 
@@ -396,6 +422,21 @@ jobs:
         run: 'node ./bundle/gemini.js --version'
         shell: 'pwsh'
 
+      - name: 'Smoke test npx installation'
+        run: |
+          # 1. Package the project into a tarball
+          $PACK_OUTPUT = npm pack
+          $TARBALL = $PACK_OUTPUT[-1]
+
+          # 2. Move to a fresh directory for isolation
+          New-Item -ItemType Directory -Force -Path ../smoke-test-dir
+          Move-Item $TARBALL ../smoke-test-dir/
+          Set-Location ../smoke-test-dir
+
+          # 3. Run npx from the tarball
+          npx "./$TARBALL" --version
+        shell: 'pwsh'
+
   ci:
     name: 'CI'
     if: 'always()'

.github/workflows/gemini-scheduled-stale-issue-closer.yml

@@ -79,8 +79,14 @@ jobs:
                 continue;
               }
 
-              // Skip if it has a maintainer label
-              if (issue.labels.some(label => label.name.toLowerCase().includes('maintainer'))) {
+              // Skip if it has a maintainer, help wanted, or Public Roadmap label
+              const rawLabels = issue.labels.map((l) => l.name);
+              const lowercaseLabels = rawLabels.map((l) => l.toLowerCase());
+              if (
+                lowercaseLabels.some((l) => l.includes('maintainer')) ||
+                lowercaseLabels.includes('help wanted') ||
+                rawLabels.includes('🗓️ Public Roadmap')
+              ) {
                 continue;
               }
 

.github/workflows/gemini-scheduled-stale-pr-closer.yml

@@ -0,0 +1,223 @@
+name: 'Gemini Scheduled Stale PR Closer'
+
+on:
+  schedule:
+    - cron: '0 2 * * *' # Every day at 2 AM UTC
+  pull_request:
+    types: ['opened', 'edited']
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: 'Run in dry-run mode'
+        required: false
+        default: false
+        type: 'boolean'
+
+jobs:
+  close-stale-prs:
+    if: "github.repository == 'google-gemini/gemini-cli'"
+    runs-on: 'ubuntu-latest'
+    permissions:
+      pull-requests: 'write'
+      issues: 'write'
+    steps:
+      - name: 'Generate GitHub App Token'
+        id: 'generate_token'
+        uses: 'actions/create-github-app-token@v1'
+        with:
+          app-id: '${{ secrets.APP_ID }}'
+          private-key: '${{ secrets.PRIVATE_KEY }}'
+          owner: '${{ github.repository_owner }}'
+          repositories: 'gemini-cli'
+
+      - name: 'Process Stale PRs'
+        uses: 'actions/github-script@v7'
+        env:
+          DRY_RUN: '${{ inputs.dry_run }}'
+        with:
+          github-token: '${{ steps.generate_token.outputs.token }}'
+          script: |
+            const dryRun = process.env.DRY_RUN === 'true';
+            const thirtyDaysAgo = new Date();
+            thirtyDaysAgo.setDate(thirtyDaysAgo.getDate() - 30);
+
+            // 1. Fetch maintainers for verification
+            let maintainerLogins = new Set();
+            let teamFetchSucceeded = false;
+            try {
+              const members = await github.paginate(github.rest.teams.listMembersInOrg, {
+                org: context.repo.owner,
+                team_slug: 'gemini-cli-maintainers'
+              });
+              maintainerLogins = new Set(members.map(m => m.login.toLowerCase()));
+              teamFetchSucceeded = true;
+              core.info(`Successfully fetched ${maintainerLogins.size} team members from gemini-cli-maintainers`);
+            } catch (e) {
+              core.warning(`Failed to fetch team members from gemini-cli-maintainers: ${e.message}. Falling back to author_association only.`);
+            }
+
+            const isMaintainer = (login, assoc) => {
+              const isTeamMember = maintainerLogins.has(login.toLowerCase());
+              const isRepoMaintainer = ['OWNER', 'MEMBER', 'COLLABORATOR'].includes(assoc);
+              return isTeamMember || isRepoMaintainer;
+            };
+
+            // 2. Determine which PRs to check
+            let prs = [];
+            if (context.eventName === 'pull_request') {
+              const { data: pr } = await github.rest.pulls.get({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                pull_number: context.payload.pull_request.number
+              });
+              prs = [pr];
+            } else {
+              prs = await github.paginate(github.rest.pulls.list, {
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                state: 'open',
+                per_page: 100
+              });
+            }
+
+            for (const pr of prs) {
+              const maintainerPr = isMaintainer(pr.user.login, pr.author_association);
+              const isBot = pr.user.type === 'Bot' || pr.user.login.endsWith('[bot]');
+
+              // Detection Logic for Linked Issues
+              // Check 1: Official GitHub "Closing Issue" link (GraphQL)
+              const linkedIssueQuery = `query($owner:String!, $repo:String!, $number:Int!) {
+                repository(owner:$owner, name:$repo) {
+                  pullRequest(number:$number) {
+                    closingIssuesReferences(first: 1) { totalCount }
+                  }
+                }
+              }`;
+
+              let hasClosingLink = false;
+              try {
+                const res = await github.graphql(linkedIssueQuery, {
+                  owner: context.repo.owner, repo: context.repo.repo, number: pr.number
+                });
+                hasClosingLink = res.repository.pullRequest.closingIssuesReferences.totalCount > 0;
+              } catch (e) {}
+
+              // Check 2: Regex for mentions (e.g., "Related to #123", "Part of #123", "#123")
+              // We check for # followed by numbers or direct URLs to issues.
+              const body = pr.body || '';
+              const mentionRegex = /(?:#|https:\/\/github\.com\/[^\/]+\/[^\/]+\/issues\/)(\d+)/i;
+              const hasMentionLink = mentionRegex.test(body);
+
+              const hasLinkedIssue = hasClosingLink || hasMentionLink;
+
+              // Logic for Closed PRs (Auto-Reopen)
+              if (pr.state === 'closed' && context.eventName === 'pull_request' && context.payload.action === 'edited') {
+                if (hasLinkedIssue) {
+                  core.info(`PR #${pr.number} now has a linked issue. Reopening.`);
+                  if (!dryRun) {
+                    await github.rest.pulls.update({
+                      owner: context.repo.owner,
+                      repo: context.repo.repo,
+                      pull_number: pr.number,
+                      state: 'open'
+                    });
+                    await github.rest.issues.createComment({
+                      owner: context.repo.owner,
+                      repo: context.repo.repo,
+                      issue_number: pr.number,
+                      body: "Thank you for linking an issue! This pull request has been automatically reopened."
+                    });
+                  }
+                }
+                continue;
+              }
+
+              // Logic for Open PRs (Immediate Closure)
+              if (pr.state === 'open' && !maintainerPr && !hasLinkedIssue && !isBot) {
+                core.info(`PR #${pr.number} is missing a linked issue. Closing.`);
+                if (!dryRun) {
+                  await github.rest.issues.createComment({
+                    owner: context.repo.owner,
+                    repo: context.repo.repo,
+                    issue_number: pr.number,
+                    body: "Hi there! Thank you for your contribution to Gemini CLI. \n\nTo improve our contribution process and better track changes, we now require all pull requests to be associated with an existing issue, as announced in our [recent discussion](https://github.com/google-gemini/gemini-cli/discussions/16706) and as detailed in our [CONTRIBUTING.md](https://github.com/google-gemini/gemini-cli/blob/main/CONTRIBUTING.md#1-link-to-an-existing-issue).\n\nThis pull request is being closed because it is not currently linked to an issue. **Once you have updated the description of this PR to link an issue (e.g., by adding `Fixes #123` or `Related to #123`), it will be automatically reopened.**\n\n**How to link an issue:**\nAdd a keyword followed by the issue number (e.g., `Fixes #123`) in the description of your pull request. For more details on supported keywords and how linking works, please refer to the [GitHub Documentation on linking pull requests to issues](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue).\n\nThank you for your understanding and for being a part of our community!"
+                  });
+                  await github.rest.pulls.update({
+                    owner: context.repo.owner,
+                    repo: context.repo.repo,
+                    pull_number: pr.number,
+                    state: 'closed'
+                  });
+                }
+                continue;
+              }
+
+              // Staleness check (Scheduled runs only)
+              if (pr.state === 'open' && context.eventName !== 'pull_request') {
+                const labels = pr.labels.map(l => l.name.toLowerCase());
+                if (labels.includes('help wanted') || labels.includes('🔒 maintainer only')) continue;
+
+                // Skip PRs that were created less than 30 days ago - they cannot be stale yet
+                const prCreatedAt = new Date(pr.created_at);
+                if (prCreatedAt > thirtyDaysAgo) {
+                  const daysOld = Math.floor((Date.now() - prCreatedAt.getTime()) / (1000 * 60 * 60 * 24));
+                  core.info(`PR #${pr.number} was created ${daysOld} days ago. Skipping staleness check.`);
+                  continue;
+                }
+
+                // Initialize lastActivity to PR creation date (not epoch) as a safety baseline.
+                // This ensures we never incorrectly mark a PR as stale due to failed activity lookups.
+                let lastActivity = new Date(pr.created_at);
+                try {
+                  const reviews = await github.paginate(github.rest.pulls.listReviews, {
+                    owner: context.repo.owner,
+                    repo: context.repo.repo,
+                    pull_number: pr.number
+                  });
+                  for (const r of reviews) {
+                    if (isMaintainer(r.user.login, r.author_association)) {
+                      const d = new Date(r.submitted_at || r.updated_at);
+                      if (d > lastActivity) lastActivity = d;
+                    }
+                  }
+                  const comments = await github.paginate(github.rest.issues.listComments, {
+                    owner: context.repo.owner,
+                    repo: context.repo.repo,
+                    issue_number: pr.number
+                  });
+                  for (const c of comments) {
+                    if (isMaintainer(c.user.login, c.author_association)) {
+                      const d = new Date(c.updated_at);
+                      if (d > lastActivity) lastActivity = d;
+                    }
+                  }
+                } catch (e) {
+                  core.warning(`Failed to fetch reviews/comments for PR #${pr.number}: ${e.message}`);
+                }
+
+                // For maintainer PRs, the PR creation itself counts as maintainer activity.
+                // (Now redundant since we initialize to pr.created_at, but kept for clarity)
+                if (maintainerPr) {
+                  const d = new Date(pr.created_at);
+                  if (d > lastActivity) lastActivity = d;
+                }
+
+                if (lastActivity < thirtyDaysAgo) {
+                  core.info(`PR #${pr.number} is stale.`);
+                  if (!dryRun) {
+                    await github.rest.issues.createComment({
+                      owner: context.repo.owner,
+                      repo: context.repo.repo,
+                      issue_number: pr.number,
+                      body: "Hi there! Thank you for your contribution to Gemini CLI. We really appreciate the time and effort you've put into this pull request.\n\nTo keep our backlog manageable and ensure we're focusing on current priorities, we are closing pull requests that haven't seen maintainer activity for 30 days. Currently, the team is prioritizing work associated with **🔒 maintainer only** or **help wanted** issues.\n\nIf you believe this change is still critical, please feel free to comment with updated details. Otherwise, we encourage contributors to focus on open issues labeled as **help wanted**. Thank you for your understanding!"
+                    });
+                    await github.rest.pulls.update({
+                      owner: context.repo.owner,
+                      repo: context.repo.repo,
+                      pull_number: pr.number,
+                      state: 'closed'
+                    });
+                  }
+                }
+              }
+            }

.github/workflows/label-enforcer.yml

@@ -1,119 +0,0 @@
-name: '🏷️ Enforce Restricted Label Permissions'
-
-on:
-  issues:
-    types:
-      - 'labeled'
-      - 'unlabeled'
-
-jobs:
-  enforce-label:
-    # Run this job only when restricted labels are changed
-    if: |-
-      ${{ (github.event.label.name == 'help wanted' || github.event.label.name == 'status/need-triage' || github.event.label.name == '🔒 maintainer only') &&
-          (github.repository == 'google-gemini/gemini-cli' || github.repository == 'google-gemini/maintainers-gemini-cli') }}
-    runs-on: 'ubuntu-latest'
-    permissions:
-      issues: 'write'
-    steps:
-      - name: 'Generate GitHub App Token'
-        id: 'generate_token'
-        env:
-          APP_ID: '${{ secrets.APP_ID }}'
-        if: |-
-          ${{ env.APP_ID != '' }}
-        uses: 'actions/create-github-app-token@a8d616148505b5069dccd32f177bb87d7f39123b' # ratchet:actions/create-github-app-token@v2
-        with:
-          app-id: '${{ secrets.APP_ID }}'
-          private-key: '${{ secrets.PRIVATE_KEY }}'
-
-      - name: 'Check if user is in the maintainers team'
-        uses: 'actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea'
-        with:
-          github-token: '${{ steps.generate_token.outputs.token || secrets.GITHUB_TOKEN }}'
-          script: |-
-            const org = context.repo.owner;
-            const username = context.payload.sender.login;
-            const team_slug = 'gemini-cli-maintainers';
-            const action = context.payload.action; // 'labeled' or 'unlabeled'
-            const labelName = context.payload.label.name;
-
-            // Skip if the change was made by a bot to avoid infinite loops
-            if (username === 'github-actions[bot]' || username === 'gemini-cli[bot]' || username.endsWith('[bot]')) {
-              core.info('Change made by a bot. Skipping.');
-              return;
-            }
-
-            try {
-              // Check repository permission level directly.
-              // This is more robust than team membership as it doesn't require Org-level read permissions
-              // and correctly handles Repo Admins/Writers who might not be in the specific team.
-              const { data: { permission } } = await github.rest.repos.getCollaboratorPermissionLevel({
-                owner: org,
-                repo: context.repo.repo,
-                username,
-              });
-
-              if (permission === 'admin' || permission === 'write') {
-                core.info(`${username} has '${permission}' permission. Allowed.`);
-                return;
-              }
-
-              core.info(`${username} has '${permission}' permission (needs 'write' or 'admin'). Reverting '${action}' action for '${labelName}' label.`);
-            } catch (error) {
-              core.error(`Failed to check permissions for ${username}: ${error.message}`);
-              // Fall through to revert logic if we can't verify permissions (fail safe)
-            }
-
-            // If we are here, the user is NOT authorized.
-            if (true) { // wrapping block to preserve variable scope if needed
-              if (action === 'labeled') {
-                // 1. Remove the label if added by a non-maintainer
-                await github.rest.issues.removeLabel ({
-                  owner: org,
-                  repo: context.repo.repo,
-                  issue_number: context.issue.number,
-                  name: labelName
-                });
-
-                // 2. Post a polite comment
-                const comment = `
-            Hi @${username}, thank you for your interest in helping triage issues!
-
-            The \`${labelName}\` label is reserved for project maintainers to apply. This helps us ensure that an issue is ready and properly vetted for community contribution.
-
-            A maintainer will review this issue soon. Please see our [CONTRIBUTING.md](https://github.com/google-gemini/gemini-cli/blob/main/CONTRIBUTING.md) for more details on our labeling process.
-                `.trim().replace(/^[ ]+/gm, '');
-
-                await github.rest.issues.createComment ({
-                  owner: org,
-                  repo: context.repo.repo,
-                  issue_number: context.issue.number,
-                  body: comment
-                });
-              } else if (action === 'unlabeled') {
-                // 1. Add the label back if removed by a non-maintainer
-                await github.rest.issues.addLabels ({
-                  owner: org,
-                  repo: context.repo.repo,
-                  issue_number: context.issue.number,
-                  labels: [labelName]
-                });
-
-                // 2. Post a polite comment
-                const comment = `
-            Hi @${username}, it looks like the \`${labelName}\` label was removed.
-
-            This label is managed by project maintainers. We've added it back to ensure the issue remains visible to potential contributors until a maintainer decides otherwise.
-
-            Thank you for your understanding!
-                `.trim().replace(/^[ ]+/gm, '');
-
-                await github.rest.issues.createComment ({
-                  owner: org,
-                  repo: context.repo.repo,
-                  issue_number: context.issue.number,
-                  body: comment
-                });
-              }
-            }

.github/workflows/stale.yml

@@ -40,5 +40,5 @@ jobs:
             If this is still relevant, you are welcome to reopen or leave a comment. Thanks for contributing!
           days-before-stale: 60
           days-before-close: 14
-          exempt-issue-labels: 'pinned,security'
-          exempt-pr-labels: 'pinned,security'
+          exempt-issue-labels: 'pinned,security,🔒 maintainer only,help wanted,🗓️ Public Roadmap'
+          exempt-pr-labels: 'pinned,security,🔒 maintainer only,help wanted,🗓️ Public Roadmap'

.gitignore

@@ -55,6 +55,7 @@ gha-creds-*.json
 
 # Log files
 patch_output.log
+gemini-debug.log
 
 .genkit
 .gemini-clipboard/

CONTRIBUTING.md

@@ -45,7 +45,7 @@ The process for contributing code is as follows:
     `🔒Maintainers only`, this means it is reserved for project maintainers. We
     will not accept pull requests related to these issues. In the near future,
     we will explicitly mark issues looking for contributions using the
-    `help  wanted` label. If you believe an issue is a good candidate for
+    `help-wanted` label. If you believe an issue is a good candidate for
     community contribution, please leave a comment on the issue. A maintainer
     will review it and apply the `help-wanted` label if appropriate. Only
     maintainers should attempt to add the `help-wanted` label to an issue.

GEMINI.md

@@ -62,9 +62,18 @@ powerful tool for developers.
 - **Imports:** Use specific imports and avoid restricted relative imports
   between packages (enforced by ESLint).
 
+## Testing Conventions
+
+- **Environment Variables:** When testing code that depends on environment
+  variables, use `vi.stubEnv('NAME', 'value')` in `beforeEach` and
+  `vi.unstubAllEnvs()` in `afterEach`. Avoid modifying `process.env` directly as
+  it can lead to test leakage and is less reliable. To "unset" a variable, use
+  an empty string `vi.stubEnv('NAME', '')`.
+
 ## Documentation
 
+- Always use the `docs-writer` skill when you are asked to write, edit, or
+  review any documentation.
+- Documentation is located in the `docs/` directory.
 - Suggest documentation updates when code changes render existing documentation
   obsolete or incomplete.
-- Located in the `docs/` directory.
-- Use the `docs-writer` skill.

README.md

@@ -4,7 +4,7 @@
 [![Gemini CLI E2E (Chained)](https://github.com/google-gemini/gemini-cli/actions/workflows/chained_e2e.yml/badge.svg)](https://github.com/google-gemini/gemini-cli/actions/workflows/chained_e2e.yml)
 [![Version](https://img.shields.io/npm/v/@google/gemini-cli)](https://www.npmjs.com/package/@google/gemini-cli)
 [![License](https://img.shields.io/github/license/google-gemini/gemini-cli)](https://github.com/google-gemini/gemini-cli/blob/main/LICENSE)
-[![View Code Wiki](https://www.gstatic.com/_/boq-sdlc-agents-ui/_/r/YUi5dj2UWvE.svg)](https://codewiki.google/github.com/google-gemini/gemini-cli)
+[![View Code Wiki](https://assets.codewiki.google/readme-badge/static.svg)](https://codewiki.google/github.com/google-gemini/gemini-cli?utm_source=badge&utm_medium=github&utm_campaign=github.com/google-gemini/gemini-cli)
 
 ![Gemini CLI Screenshot](./docs/assets/gemini-screenshot.png)
 
@@ -55,6 +55,23 @@ npm install -g @google/gemini-cli
 brew install gemini-cli
 ```
 
+#### Install globally with MacPorts (macOS)
+
+```bash
+sudo port install gemini-cli
+```
+
+#### Install with Anaconda (for restricted environments)
+
+```bash
+# Create and activate a new environment
+conda create -y -n gemini_env -c conda-forge nodejs
+conda activate gemini_env
+
+# Install Gemini CLI globally via npm (inside the environment)
+npm install -g @google/gemini-cli
+```
+
 ## Release Cadence and Tags
 
 See [Releases](./docs/releases.md) for more details.
@@ -107,6 +124,8 @@ npm install -g @google/gemini-cli@nightly
 
 ### Advanced Capabilities
 
+- **Automated Iterative Loops**: Use [Ralph Wiggum mode](./docs/ralph-wiggum.md)
+  to repeatedly execute prompts until a goal is met (e.g., fixing tests).
 - Ground your queries with built-in
   [Google Search](https://ai.google.dev/gemini-api/docs/grounding) for real-time
   information
@@ -239,6 +258,33 @@ use `--output-format stream-json` to get newline-delimited JSON events:
 gemini -p "Run tests and deploy" --output-format stream-json
 ```
 
+### Ralph Wiggum Mode (Iterative Automation)
+
+Ralph Wiggum mode is an advanced automation feature that allows Gemini CLI to
+repeatedly execute a prompt in a loop until a specific goal is achieved. This is
+ideal for tasks like fixing failing tests or complex refactoring.
+
+To use Ralph Wiggum mode, provide a prompt and a **completion promise** (a
+string to look for in the output). The CLI will:
+
+1.  Enter **YOLO mode** to auto-approve all tool calls.
+2.  Run the prompt and check the response for your completion string.
+3.  If not found, it repeats the process up to a specified **max iterations**.
+4.  **Persistent Context**: It uses a **memory file** (`memories.md` by default)
+    to pass notes between iterations. **Note:** Use a unique `--memory-file` for
+    different tasks in the same directory to ensure context isolation.
+
+```bash
+gemini -p "Fix the failing tests in this repo" \
+  --ralph-wiggum \
+  --completion-promise "ALL TESTS PASSED" \
+  --max-iterations 5 \
+  --memory-file "task-fix-tests.md"
+```
+
+At the end of the run, a summary table displays the result of each iteration and
+extracted test statistics.
+
 ### Quick Examples
 
 #### Start a new project

docs/changelogs/index.md

@@ -18,6 +18,23 @@ on GitHub.
 | [Preview](preview.md) | Experimental features ready for early feedback. |
 | [Stable](latest.md)   | Stable, recommended for general use.            |
 
+## Announcements: v0.26.0 - 2026-01-27
+
+- **Agents and Skills:** We've introduced a new `skill-creator` skill
+  ([#16394](https://github.com/google-gemini/gemini-cli/pull/16394) by
+  @NTaylorMullen), enabled agent skills by default, and added a generalist agent
+  to improve task routing
+  ([#16638](https://github.com/google-gemini/gemini-cli/pull/16638) by
+  @joshualitt).
+- **UI/UX Improvements:** You can now "Rewind" through your conversation history
+  ([#15717](https://github.com/google-gemini/gemini-cli/pull/15717) by @Adib234)
+  and use a new `/introspect` command for debugging.
+- **Core and Scheduler Refactoring:** The core scheduler has been significantly
+  refactored to improve performance and reliability
+  ([#16895](https://github.com/google-gemini/gemini-cli/pull/16895) by
+  @abhipatel12), and numerous performance and stability fixes have been
+  included.
+
 ## Announcements: v0.25.0 - 2026-01-20
 
 - **Skills and Agents Improvements:** We've enhanced the `activate_skill` tool,

docs/changelogs/latest.md

@@ -1,6 +1,6 @@
-# Latest stable release: v0.25.0
+# Latest stable release: v0.26.0
 
-Released: January 20, 2026
+Released: January 27, 2026
 
 For most users, our latest stable release is the recommended release. Install
 the latest stable version with:
@@ -11,360 +11,328 @@ npm install -g @google/gemini-cli
 
 ## Highlights
 
-- **Skills and Agents Improvements:** Enhanced `activate_skill` tool, new
-  `pr-creator` skill, default enablement of skills, improved `cli_help` agent,
-  and a new `/agents refresh` command.
-- **UI/UX Refinements:** Transparent feedback for skills, ability to switch
-  focus between shell and input with Tab, and dynamic terminal tab titles.
-- **Core Functionality & Performance:** Support for built-in agent skills,
-  refined Gemini 3 system instructions, caching ignore instances for
-  performance, and improved retry mechanisms.
-- **Bug Fixes and Stability:** Numerous bug fixes across the CLI, core, and
-  workflows, including issues with subagent delegation, unicode character
-  crashes, and sticky header regressions.
+- **Enhanced Agent and Skill Capabilities:** This release introduces the new
+  `skill-creator` built-in skill, enables Agent Skills by default, and adds a
+  generalist agent to improve task routing. Security for skill installation has
+  also been enhanced with new consent prompts.
+- **Improved UI and UX:** A new "Rewind" feature lets you walk back through
+  conversation history. We've also added an `/introspect` command for debugging
+  and unified various shell confirmation dialogs for a more consistent user
+  experience.
+- **Core Stability and Performance:** This release includes significant
+  performance improvements, including a fix for PDF token estimation,
+  optimizations for large inputs, and prevention of OOM crashes. Key memory
+  management components like `LRUCache` have also been updated.
+- **Scheduler and Policy Refactoring:** The core tool scheduler has been
+  decoupled into distinct orchestration, policy, and confirmation components,
+  and we've added an experimental event-driven scheduler to improve performance
+  and reliability.
 
 ## What's Changed
 
-- feat(core): improve activate_skill tool and use lowercase XML tags by
-  @NTaylorMullen in
-  [#16009](https://github.com/google-gemini/gemini-cli/pull/16009)
-- Add initiation method telemetry property by @gundermanc in
-  [#15818](https://github.com/google-gemini/gemini-cli/pull/15818)
-- chore(release): bump version to 0.25.0-nightly.20260107.59a18e710 by
+- fix: PDF token estimation (#16494) by @korade-krushna in
+  [#16527](https://github.com/google-gemini/gemini-cli/pull/16527)
+- chore(release): bump version to 0.26.0-nightly.20260114.bb6c57414 by
   @gemini-cli-robot in
-  [#16048](https://github.com/google-gemini/gemini-cli/pull/16048)
-- Hx support by @kevinfjiang in
-  [#16032](https://github.com/google-gemini/gemini-cli/pull/16032)
-- [Skills] Foundation: Centralize management logic and feedback rendering by
-  @NTaylorMullen in
-  [#15952](https://github.com/google-gemini/gemini-cli/pull/15952)
-- Introduce GEMINI_CLI_HOME for strict test isolation by @NTaylorMullen in
-  [#15907](https://github.com/google-gemini/gemini-cli/pull/15907)
-- [Skills] Multi-scope skill enablement and shadowing fix by @NTaylorMullen in
-  [#15953](https://github.com/google-gemini/gemini-cli/pull/15953)
-- policy: extract legacy policy from core tool scheduler to policy engine by
+  [#16604](https://github.com/google-gemini/gemini-cli/pull/16604)
+- docs: clarify F12 to open debug console by @jackwotherspoon in
+  [#16570](https://github.com/google-gemini/gemini-cli/pull/16570)
+- docs: Remove .md extension from internal links in architecture.md by
+  @medic-code in
+  [#12899](https://github.com/google-gemini/gemini-cli/pull/12899)
+- Add an experimental setting for extension config by @chrstnb in
+  [#16506](https://github.com/google-gemini/gemini-cli/pull/16506)
+- feat: add Rewind Confirmation dialog and Rewind Viewer component by @Adib234
+  in [#15717](https://github.com/google-gemini/gemini-cli/pull/15717)
+- fix(a2a): Don't throw errors for GeminiEventType Retry and InvalidStream. by
+  @ehedlund in [#16541](https://github.com/google-gemini/gemini-cli/pull/16541)
+- prefactor: add rootCommands as array so it can be used for policy parsing by
   @abhipatel12 in
-  [#15902](https://github.com/google-gemini/gemini-cli/pull/15902)
-- Enhance TestRig with process management and timeouts by @NTaylorMullen in
-  [#15908](https://github.com/google-gemini/gemini-cli/pull/15908)
-- Update troubleshooting doc for UNABLE_TO_GET_ISSUER_CERT_LOCALLY by @sehoon38
-  in [#16069](https://github.com/google-gemini/gemini-cli/pull/16069)
-- Add keytar to dependencies by @chrstnb in
-  [#15928](https://github.com/google-gemini/gemini-cli/pull/15928)
-- Simplify extension settings command by @chrstnb in
-  [#16001](https://github.com/google-gemini/gemini-cli/pull/16001)
-- feat(admin): implement extensions disabled by @skeshive in
-  [#16024](https://github.com/google-gemini/gemini-cli/pull/16024)
-- Core data structure updates for Rewind functionality by @Adib234 in
-  [#15714](https://github.com/google-gemini/gemini-cli/pull/15714)
-- feat(hooks): simplify hook firing with HookSystem wrapper methods by @ved015
-  in [#15982](https://github.com/google-gemini/gemini-cli/pull/15982)
-- Add exp.gws_experiment field to LogEventEntry by @gsquared94 in
-  [#16062](https://github.com/google-gemini/gemini-cli/pull/16062)
-- Revert "feat(admin): implement extensions disabled" by @chrstnb in
-  [#16082](https://github.com/google-gemini/gemini-cli/pull/16082)
-- feat(core): Decouple enabling hooks UI from subsystem. by @joshualitt in
-  [#16074](https://github.com/google-gemini/gemini-cli/pull/16074)
-- docs: add docs for hooks + extensions by @abhipatel12 in
-  [#16073](https://github.com/google-gemini/gemini-cli/pull/16073)
-- feat(core): Preliminary changes for subagent model routing. by @joshualitt in
-  [#16035](https://github.com/google-gemini/gemini-cli/pull/16035)
-- Optimize CI workflow: Parallelize jobs and cache linters by @NTaylorMullen in
-  [#16054](https://github.com/google-gemini/gemini-cli/pull/16054)
-- Add option to fallback for capacity errors in ProQuotaDi… by @sehoon38 in
-  [#16050](https://github.com/google-gemini/gemini-cli/pull/16050)
-- feat: add confirmation details support + jsonrpc vs http rest support by
-  @adamfweidman in
-  [#16079](https://github.com/google-gemini/gemini-cli/pull/16079)
-- fix(workflows): fix and limit labels for pr-triage.sh script by @jacob314 in
-  [#16096](https://github.com/google-gemini/gemini-cli/pull/16096)
-- Fix and rename introspection agent -> cli help agent by @scidomino in
-  [#16097](https://github.com/google-gemini/gemini-cli/pull/16097)
-- Docs: Changelogs update 20260105 by @jkcinouye in
-  [#15937](https://github.com/google-gemini/gemini-cli/pull/15937)
-- enable cli_help agent by default by @scidomino in
-  [#16100](https://github.com/google-gemini/gemini-cli/pull/16100)
-- Optimize json-output tests with mock responses by @NTaylorMullen in
-  [#16102](https://github.com/google-gemini/gemini-cli/pull/16102)
-- Fix CI for forks by @scidomino in
-  [#16113](https://github.com/google-gemini/gemini-cli/pull/16113)
-- Reduce nags about PRs that reference issues but don't fix them. by @jacob314
-  in [#16112](https://github.com/google-gemini/gemini-cli/pull/16112)
-- feat(cli): add filepath autosuggestion after slash commands by @jasmeetsb in
-  [#14738](https://github.com/google-gemini/gemini-cli/pull/14738)
-- Add upgrade option for paid users by @cayden-google in
-  [#15978](https://github.com/google-gemini/gemini-cli/pull/15978)
-- [Skills] UX Polishing: Transparent feedback and CLI refinements by
+  [#16640](https://github.com/google-gemini/gemini-cli/pull/16640)
+- remove unnecessary \x7f key bindings by @scidomino in
+  [#16646](https://github.com/google-gemini/gemini-cli/pull/16646)
+- docs(skills): use body-file in pr-creator skill for better reliability by
+  @abhipatel12 in
+  [#16642](https://github.com/google-gemini/gemini-cli/pull/16642)
+- chore(automation): recursive labeling for workstream descendants by @bdmorgan
+  in [#16609](https://github.com/google-gemini/gemini-cli/pull/16609)
+- feat: introduce 'skill-creator' built-in skill and CJS management tools by
   @NTaylorMullen in
-  [#15954](https://github.com/google-gemini/gemini-cli/pull/15954)
-- Polish: Move 'Failed to load skills' warning to debug logs by @NTaylorMullen
-  in [#16142](https://github.com/google-gemini/gemini-cli/pull/16142)
-- feat(cli): export chat history in /bug and prefill GitHub issue by
+  [#16394](https://github.com/google-gemini/gemini-cli/pull/16394)
+- chore(automation): remove automated PR size and complexity labeler by
+  @bdmorgan in [#16648](https://github.com/google-gemini/gemini-cli/pull/16648)
+- refactor(skills): replace 'project' with 'workspace' scope by @NTaylorMullen
+  in [#16380](https://github.com/google-gemini/gemini-cli/pull/16380)
+- Docs: Update release notes for 1/13/2026 by @jkcinouye in
+  [#16583](https://github.com/google-gemini/gemini-cli/pull/16583)
+- Simplify paste handling by @scidomino in
+  [#16654](https://github.com/google-gemini/gemini-cli/pull/16654)
+- chore(automation): improve scheduled issue triage discovery and throughput by
+  @bdmorgan in [#16652](https://github.com/google-gemini/gemini-cli/pull/16652)
+- fix(acp): run exit cleanup when stdin closes by @codefromthecrypt in
+  [#14953](https://github.com/google-gemini/gemini-cli/pull/14953)
+- feat(scheduler): add types needed for event driven scheduler by @abhipatel12
+  in [#16641](https://github.com/google-gemini/gemini-cli/pull/16641)
+- Remove unused rewind key binding by @scidomino in
+  [#16659](https://github.com/google-gemini/gemini-cli/pull/16659)
+- Remove sequence binding by @scidomino in
+  [#16664](https://github.com/google-gemini/gemini-cli/pull/16664)
+- feat(cli): undeprecate the --prompt flag by @alexaustin007 in
+  [#13981](https://github.com/google-gemini/gemini-cli/pull/13981)
+- chore: update dependabot configuration by @cosmopax in
+  [#13507](https://github.com/google-gemini/gemini-cli/pull/13507)
+- feat(config): add 'auto' alias for default model selection by @sehoon38 in
+  [#16661](https://github.com/google-gemini/gemini-cli/pull/16661)
+- Enable & disable agents by @sehoon38 in
+  [#16225](https://github.com/google-gemini/gemini-cli/pull/16225)
+- cleanup: Improve keybindings by @scidomino in
+  [#16672](https://github.com/google-gemini/gemini-cli/pull/16672)
+- Add timeout for shell-utils to prevent hangs. by @jacob314 in
+  [#16667](https://github.com/google-gemini/gemini-cli/pull/16667)
+- feat(plan): add experimental plan flag by @jerop in
+  [#16650](https://github.com/google-gemini/gemini-cli/pull/16650)
+- feat(cli): add security consent prompts for skill installation by
   @NTaylorMullen in
-  [#16115](https://github.com/google-gemini/gemini-cli/pull/16115)
-- bug(core): fix issue with overrides to bases. by @joshualitt in
-  [#15255](https://github.com/google-gemini/gemini-cli/pull/15255)
-- enableInteractiveShell for external tooling relying on a2a server by
-  @DavidAPierce in
-  [#16080](https://github.com/google-gemini/gemini-cli/pull/16080)
-- Reapply "feat(admin): implement extensions disabled" (#16082) by @skeshive in
-  [#16109](https://github.com/google-gemini/gemini-cli/pull/16109)
-- bug(core): Fix spewie getter in hookTranslator.ts by @joshualitt in
-  [#16108](https://github.com/google-gemini/gemini-cli/pull/16108)
-- feat(hooks): add mcp_context to BeforeTool and AfterTool hook inputs by @vrv
-  in [#15656](https://github.com/google-gemini/gemini-cli/pull/15656)
-- Add extension linking capabilities in cli by @kevinjwang1 in
-  [#16040](https://github.com/google-gemini/gemini-cli/pull/16040)
-- Update the page's title to be consistent and show in site. by @kschaab in
-  [#16174](https://github.com/google-gemini/gemini-cli/pull/16174)
-- docs: correct typo in bufferFastReturn JSDoc ("accomodate" → "accommodate") by
-  @minglu7 in [#16056](https://github.com/google-gemini/gemini-cli/pull/16056)
-- fix: typo in MCP servers settings description by @alphanota in
-  [#15929](https://github.com/google-gemini/gemini-cli/pull/15929)
-- fix: yolo should auto allow redirection by @abhipatel12 in
-  [#16183](https://github.com/google-gemini/gemini-cli/pull/16183)
-- fix(cli): disableYoloMode shouldn't enforce default approval mode against args
-  by @psinha40898 in
-  [#16155](https://github.com/google-gemini/gemini-cli/pull/16155)
-- feat: add native Sublime Text support to IDE detection by @phreakocious in
-  [#16083](https://github.com/google-gemini/gemini-cli/pull/16083)
-- refactor(core): extract ToolModificationHandler from scheduler by @abhipatel12
-  in [#16118](https://github.com/google-gemini/gemini-cli/pull/16118)
-- Add support for Antigravity terminal in terminal setup utility by @raky291 in
-  [#16051](https://github.com/google-gemini/gemini-cli/pull/16051)
-- feat(core): Wire up model routing to subagents. by @joshualitt in
-  [#16043](https://github.com/google-gemini/gemini-cli/pull/16043)
-- feat(cli): add /agents slash command to list available agents by @adamfweidman
-  in [#16182](https://github.com/google-gemini/gemini-cli/pull/16182)
-- docs(cli): fix includeDirectories nesting in configuration.md by @maru0804 in
-  [#15067](https://github.com/google-gemini/gemini-cli/pull/15067)
-- feat: implement file system reversion utilities for rewind by @Adib234 in
-  [#15715](https://github.com/google-gemini/gemini-cli/pull/15715)
-- Always enable redaction in GitHub actions. by @gundermanc in
-  [#16200](https://github.com/google-gemini/gemini-cli/pull/16200)
-- fix: remove unsupported 'enabled' key from workflow config by @Han5991 in
-  [#15611](https://github.com/google-gemini/gemini-cli/pull/15611)
-- docs: Remove redundant and duplicate documentation files by @liqzheng in
-  [#14699](https://github.com/google-gemini/gemini-cli/pull/14699)
-- docs: shorten run command and use published version by @dsherret in
-  [#16172](https://github.com/google-gemini/gemini-cli/pull/16172)
-- test(command-registry): increase initialization test timeout by @wszqkzqk in
-  [#15979](https://github.com/google-gemini/gemini-cli/pull/15979)
-- Ensure TERM is set to xterm-256color by @falouu in
-  [#15828](https://github.com/google-gemini/gemini-cli/pull/15828)
-- The telemetry.js script should handle paths that contain spaces by @JohnJAS in
-  [#12078](https://github.com/google-gemini/gemini-cli/pull/12078)
-- ci: guard links workflow from running on forks by @wtanaka in
-  [#15461](https://github.com/google-gemini/gemini-cli/pull/15461)
-- ci: guard nightly release workflow from running on forks by @wtanaka in
-  [#15463](https://github.com/google-gemini/gemini-cli/pull/15463)
-- Support @ suggestions for subagenets by @sehoon38 in
-  [#16201](https://github.com/google-gemini/gemini-cli/pull/16201)
-- feat(hooks): Support explicit stop and block execution control in model hooks
-  by @SandyTao520 in
-  [#15947](https://github.com/google-gemini/gemini-cli/pull/15947)
-- Refine Gemini 3 system instructions to reduce model verbosity by
+  [#16549](https://github.com/google-gemini/gemini-cli/pull/16549)
+- fix: replace 3 consecutive periods with ellipsis character by @Vist233 in
+  [#16587](https://github.com/google-gemini/gemini-cli/pull/16587)
+- chore(automation): ensure status/need-triage is applied and never cleared
+  automatically by @bdmorgan in
+  [#16657](https://github.com/google-gemini/gemini-cli/pull/16657)
+- fix: Handle colons in skill description frontmatter by @maru0804 in
+  [#16345](https://github.com/google-gemini/gemini-cli/pull/16345)
+- refactor(core): harden skill frontmatter parsing by @NTaylorMullen in
+  [#16705](https://github.com/google-gemini/gemini-cli/pull/16705)
+- feat(skills): add conflict detection and warnings for skill overrides by
   @NTaylorMullen in
-  [#16139](https://github.com/google-gemini/gemini-cli/pull/16139)
-- chore: clean up unused models and use consts by @sehoon38 in
-  [#16246](https://github.com/google-gemini/gemini-cli/pull/16246)
-- Always enable bracketed paste by @scidomino in
-  [#16179](https://github.com/google-gemini/gemini-cli/pull/16179)
-- refactor: migrate clearCommand hook calls to HookSystem by @ved015 in
-  [#16157](https://github.com/google-gemini/gemini-cli/pull/16157)
-- refactor: migrate app containter hook calls to hook system by @ishaanxgupta in
-  [#16161](https://github.com/google-gemini/gemini-cli/pull/16161)
-- Show settings source in extensions lists by @chrstnb in
-  [#16207](https://github.com/google-gemini/gemini-cli/pull/16207)
-- feat(skills): add pr-creator skill and enable skills by @NTaylorMullen in
-  [#16232](https://github.com/google-gemini/gemini-cli/pull/16232)
-- fix: handle Shift+Space in Kitty keyboard protocol terminals by @tt-a1i in
-  [#15767](https://github.com/google-gemini/gemini-cli/pull/15767)
-- feat(core, ui): Add /agents refresh command. by @joshualitt in
-  [#16204](https://github.com/google-gemini/gemini-cli/pull/16204)
-- feat(core): add local experiments override via GEMINI_EXP by @kevin-ramdass in
-  [#16181](https://github.com/google-gemini/gemini-cli/pull/16181)
-- feat(ui): reduce home directory warning noise and add opt-out setting by
+  [#16709](https://github.com/google-gemini/gemini-cli/pull/16709)
+- feat(scheduler): add SchedulerStateManager for reactive tool state by
+  @abhipatel12 in
+  [#16651](https://github.com/google-gemini/gemini-cli/pull/16651)
+- chore(automation): enforce 'help wanted' label permissions and update
+  guidelines by @bdmorgan in
+  [#16707](https://github.com/google-gemini/gemini-cli/pull/16707)
+- fix(core): resolve circular dependency via tsconfig paths by @sehoon38 in
+  [#16730](https://github.com/google-gemini/gemini-cli/pull/16730)
+- chore/release: bump version to 0.26.0-nightly.20260115.6cb3ae4e0 by
+  @gemini-cli-robot in
+  [#16738](https://github.com/google-gemini/gemini-cli/pull/16738)
+- fix(automation): correct status/need-issue label matching wildcard by
+  @bdmorgan in [#16727](https://github.com/google-gemini/gemini-cli/pull/16727)
+- fix(automation): prevent label-enforcer loop by ignoring all bots by @bdmorgan
+  in [#16746](https://github.com/google-gemini/gemini-cli/pull/16746)
+- Add links to supported locations and minor fixes by @g-samroberts in
+  [#16476](https://github.com/google-gemini/gemini-cli/pull/16476)
+- feat(policy): add source tracking to policy rules by @allenhutchison in
+  [#16670](https://github.com/google-gemini/gemini-cli/pull/16670)
+- feat(automation): enforce '🔒 maintainer only' and fix bot loop by @bdmorgan
+  in [#16751](https://github.com/google-gemini/gemini-cli/pull/16751)
+- Make merged settings non-nullable and fix all lints related to that. by
+  @jacob314 in [#16647](https://github.com/google-gemini/gemini-cli/pull/16647)
+- fix(core): prevent ModelInfo event emission on aborted signal by @sehoon38 in
+  [#16752](https://github.com/google-gemini/gemini-cli/pull/16752)
+- Replace relative paths to fix website build by @chrstnb in
+  [#16755](https://github.com/google-gemini/gemini-cli/pull/16755)
+- Restricting to localhost by @cocosheng-g in
+  [#16548](https://github.com/google-gemini/gemini-cli/pull/16548)
+- fix(cli): add explicit dependency on color-convert by @sehoon38 in
+  [#16757](https://github.com/google-gemini/gemini-cli/pull/16757)
+- fix(automation): robust label enforcement with permission checks by @bdmorgan
+  in [#16762](https://github.com/google-gemini/gemini-cli/pull/16762)
+- fix(cli): prevent OOM crash by limiting file search traversal and adding
+  timeout by @galz10 in
+  [#16696](https://github.com/google-gemini/gemini-cli/pull/16696)
+- fix(cli): safely handle /dev/tty access on macOS by @korade-krushna in
+  [#16531](https://github.com/google-gemini/gemini-cli/pull/16531)
+- docs: clarify workspace test execution in GEMINI.md by @mattKorwel in
+  [#16764](https://github.com/google-gemini/gemini-cli/pull/16764)
+- Add support for running available commands prior to MCP servers loading by
+  @Adib234 in [#15596](https://github.com/google-gemini/gemini-cli/pull/15596)
+- feat(plan): add experimental 'plan' approval mode by @jerop in
+  [#16753](https://github.com/google-gemini/gemini-cli/pull/16753)
+- feat(scheduler): add functional awaitConfirmation utility by @abhipatel12 in
+  [#16721](https://github.com/google-gemini/gemini-cli/pull/16721)
+- fix(infra): update maintainer rollup label to 'workstream-rollup' by @bdmorgan
+  in [#16809](https://github.com/google-gemini/gemini-cli/pull/16809)
+- fix(infra): use GraphQL to detect direct parents in rollup workflow by
+  @bdmorgan in [#16811](https://github.com/google-gemini/gemini-cli/pull/16811)
+- chore(workflows): rename label-workstream-rollup workflow by @bdmorgan in
+  [#16818](https://github.com/google-gemini/gemini-cli/pull/16818)
+- skip simple-mcp-server.test.ts by @scidomino in
+  [#16842](https://github.com/google-gemini/gemini-cli/pull/16842)
+- Steer outer agent to use expert subagents when present by @gundermanc in
+  [#16763](https://github.com/google-gemini/gemini-cli/pull/16763)
+- Fix race condition by awaiting scheduleToolCalls by @chrstnb in
+  [#16759](https://github.com/google-gemini/gemini-cli/pull/16759)
+- cleanup: Organize key bindings by @scidomino in
+  [#16798](https://github.com/google-gemini/gemini-cli/pull/16798)
+- feat(core): Add generalist agent. by @joshualitt in
+  [#16638](https://github.com/google-gemini/gemini-cli/pull/16638)
+- perf(ui): optimize text buffer and highlighting for large inputs by
   @NTaylorMullen in
-  [#16229](https://github.com/google-gemini/gemini-cli/pull/16229)
-- refactor: migrate chatCompressionService to use HookSystem by @ved015 in
-  [#16259](https://github.com/google-gemini/gemini-cli/pull/16259)
-- fix: properly use systemMessage for hooks in UI by @jackwotherspoon in
-  [#16250](https://github.com/google-gemini/gemini-cli/pull/16250)
-- Infer modifyOtherKeys support by @scidomino in
-  [#16270](https://github.com/google-gemini/gemini-cli/pull/16270)
-- feat(core): Cache ignore instances for performance by @EricRahm in
-  [#16185](https://github.com/google-gemini/gemini-cli/pull/16185)
-- feat: apply remote admin settings (no-op) by @skeshive in
-  [#16106](https://github.com/google-gemini/gemini-cli/pull/16106)
-- Autogenerate docs/cli/settings.md docs/getting-started/configuration.md was
-  already autogenerated but settings.md was not. by @jacob314 in
-  [#14408](https://github.com/google-gemini/gemini-cli/pull/14408)
-- refactor(config): remove legacy V1 settings migration logic by @galz10 in
-  [#16252](https://github.com/google-gemini/gemini-cli/pull/16252)
-- Fix an issue where the agent stops prematurely by @gundermanc in
-  [#16269](https://github.com/google-gemini/gemini-cli/pull/16269)
-- Update system prompt to prefer non-interactive commands by @NTaylorMullen in
-  [#16117](https://github.com/google-gemini/gemini-cli/pull/16117)
-- Update ink version to 6.4.7 by @jacob314 in
-  [#16284](https://github.com/google-gemini/gemini-cli/pull/16284)
-- Support for Built-in Agent Skills by @NTaylorMullen in
-  [#16045](https://github.com/google-gemini/gemini-cli/pull/16045)
-- fix(skills): remove "Restart required" message from non-interactive commands
-  by @NTaylorMullen in
-  [#16307](https://github.com/google-gemini/gemini-cli/pull/16307)
-- remove unused sessionHookTriggers and exports by @ved015 in
-  [#16324](https://github.com/google-gemini/gemini-cli/pull/16324)
-- Triage action cleanup by @bdmorgan in
-  [#16319](https://github.com/google-gemini/gemini-cli/pull/16319)
-- fix: Add event-driven trigger to issue triage workflow by @bdmorgan in
-  [#16334](https://github.com/google-gemini/gemini-cli/pull/16334)
-- fix(workflows): resolve triage workflow failures and actionlint errors by
-  @bdmorgan in [#16338](https://github.com/google-gemini/gemini-cli/pull/16338)
-- docs: add note about experimental hooks by @abhipatel12 in
-  [#16337](https://github.com/google-gemini/gemini-cli/pull/16337)
-- feat(cli): implement passive activity logger for session analysis by
+  [#16782](https://github.com/google-gemini/gemini-cli/pull/16782)
+- fix(core): fix PTY descriptor shell leak by @galz10 in
+  [#16773](https://github.com/google-gemini/gemini-cli/pull/16773)
+- feat(plan): enforce strict read-only policy and halt execution on violation by
+  @jerop in [#16849](https://github.com/google-gemini/gemini-cli/pull/16849)
+- remove need-triage label from bug_report template by @sehoon38 in
+  [#16864](https://github.com/google-gemini/gemini-cli/pull/16864)
+- fix(core): truncate large telemetry log entries by @sehoon38 in
+  [#16769](https://github.com/google-gemini/gemini-cli/pull/16769)
+- docs(extensions): add Agent Skills support and mark feature as experimental by
+  @NTaylorMullen in
+  [#16859](https://github.com/google-gemini/gemini-cli/pull/16859)
+- fix(core): surface warnings for invalid hook event names in configuration
+  (#16788) by @sehoon38 in
+  [#16873](https://github.com/google-gemini/gemini-cli/pull/16873)
+- feat(plan): remove read_many_files from approval mode policies by @jerop in
+  [#16876](https://github.com/google-gemini/gemini-cli/pull/16876)
+- feat(admin): implement admin controls polling and restart prompt by @skeshive
+  in [#16627](https://github.com/google-gemini/gemini-cli/pull/16627)
+- Remove LRUCache class migrating to mnemoist by @jacob314 in
+  [#16872](https://github.com/google-gemini/gemini-cli/pull/16872)
+- feat(settings): rename negative settings to positive naming (disable* ->
+  enable*) by @afarber in
+  [#14142](https://github.com/google-gemini/gemini-cli/pull/14142)
+- refactor(cli): unify shell confirmation dialogs by @NTaylorMullen in
+  [#16828](https://github.com/google-gemini/gemini-cli/pull/16828)
+- feat(agent): enable agent skills by default by @NTaylorMullen in
+  [#16736](https://github.com/google-gemini/gemini-cli/pull/16736)
+- refactor(core): foundational truncation refactoring and token estimation
+  optimization by @NTaylorMullen in
+  [#16824](https://github.com/google-gemini/gemini-cli/pull/16824)
+- fix(hooks): enable /hooks disable to reliably stop single hooks by
+  @abhipatel12 in
+  [#16804](https://github.com/google-gemini/gemini-cli/pull/16804)
+- Don't commit unless user asks us to. by @gundermanc in
+  [#16902](https://github.com/google-gemini/gemini-cli/pull/16902)
+- chore: remove a2a-adapter and bump @a2a-js/sdk to 0.3.8 by @adamfweidman in
+  [#16800](https://github.com/google-gemini/gemini-cli/pull/16800)
+- fix: Show experiment values in settings UI for compressionThreshold by
+  @ishaanxgupta in
+  [#16267](https://github.com/google-gemini/gemini-cli/pull/16267)
+- feat(cli): replace relative keyboard shortcuts link with web URL by
+  @imaliabbas in
+  [#16479](https://github.com/google-gemini/gemini-cli/pull/16479)
+- fix(core): resolve PKCE length issue and stabilize OAuth redirect port by
+  @sehoon38 in [#16815](https://github.com/google-gemini/gemini-cli/pull/16815)
+- Delete rewind documentation for now by @Adib234 in
+  [#16932](https://github.com/google-gemini/gemini-cli/pull/16932)
+- Stabilize skill-creator CI and package format by @NTaylorMullen in
+  [#17001](https://github.com/google-gemini/gemini-cli/pull/17001)
+- Stabilize the git evals by @gundermanc in
+  [#16989](https://github.com/google-gemini/gemini-cli/pull/16989)
+- fix(core): attempt compression before context overflow check by @NTaylorMullen
+  in [#16914](https://github.com/google-gemini/gemini-cli/pull/16914)
+- Fix inverted logic. by @gundermanc in
+  [#17007](https://github.com/google-gemini/gemini-cli/pull/17007)
+- chore(scripts): add duplicate issue closer script and fix lint errors by
+  @bdmorgan in [#16997](https://github.com/google-gemini/gemini-cli/pull/16997)
+- docs: update README and config guide to reference Gemini 3 by @JayadityaGit in
+  [#15806](https://github.com/google-gemini/gemini-cli/pull/15806)
+- fix(cli): correct Homebrew installation detection by @kij in
+  [#14727](https://github.com/google-gemini/gemini-cli/pull/14727)
+- Demote git evals to nightly run. by @gundermanc in
+  [#17030](https://github.com/google-gemini/gemini-cli/pull/17030)
+- fix(cli): use OSC-52 clipboard copy in Windows Terminal by @Thomas-Shephard in
+  [#16920](https://github.com/google-gemini/gemini-cli/pull/16920)
+- Fix: Process all parts in response chunks when thought is first by @pyrytakala
+  in [#13539](https://github.com/google-gemini/gemini-cli/pull/13539)
+- fix(automation): fix jq quoting error in pr-triage.sh by @Kimsoo0119 in
+  [#16958](https://github.com/google-gemini/gemini-cli/pull/16958)
+- refactor(core): decouple scheduler into orchestration, policy, and
+  confirmation by @abhipatel12 in
+  [#16895](https://github.com/google-gemini/gemini-cli/pull/16895)
+- feat: add /introspect slash command by @NTaylorMullen in
+  [#17048](https://github.com/google-gemini/gemini-cli/pull/17048)
+- refactor(cli): centralize tool mapping and decouple legacy scheduler by
+  @abhipatel12 in
+  [#17044](https://github.com/google-gemini/gemini-cli/pull/17044)
+- fix(ui): ensure rationale renders before tool calls by @NTaylorMullen in
+  [#17043](https://github.com/google-gemini/gemini-cli/pull/17043)
+- fix(workflows): use author_association for maintainer check by @bdmorgan in
+  [#17060](https://github.com/google-gemini/gemini-cli/pull/17060)
+- fix return type of fireSessionStartEvent to defaultHookOutput by @ved015 in
+  [#16833](https://github.com/google-gemini/gemini-cli/pull/16833)
+- feat(cli): add experiment gate for event-driven scheduler by @abhipatel12 in
+  [#17055](https://github.com/google-gemini/gemini-cli/pull/17055)
+- feat(core): improve shell redirection transparency and security by
+  @NTaylorMullen in
+  [#16486](https://github.com/google-gemini/gemini-cli/pull/16486)
+- fix(core): deduplicate ModelInfo emission in GeminiClient by @NTaylorMullen in
+  [#17075](https://github.com/google-gemini/gemini-cli/pull/17075)
+- docs(themes): remove unsupported DiffModified color key by @jw409 in
+  [#17073](https://github.com/google-gemini/gemini-cli/pull/17073)
+- fix: update currentSequenceModel when modelChanged by @adamfweidman in
+  [#17051](https://github.com/google-gemini/gemini-cli/pull/17051)
+- feat(core): enhanced anchored iterative context compression with
+  self-verification by @rmedranollamas in
+  [#15710](https://github.com/google-gemini/gemini-cli/pull/15710)
+- Fix mcp instructions by @chrstnb in
+  [#16439](https://github.com/google-gemini/gemini-cli/pull/16439)
+- [A2A] Disable checkpointing if git is not installed by @cocosheng-g in
+  [#16896](https://github.com/google-gemini/gemini-cli/pull/16896)
+- feat(admin): set admin.skills.enabled based on advancedFeaturesEnabled setting
+  by @skeshive in
+  [#17095](https://github.com/google-gemini/gemini-cli/pull/17095)
+- Test coverage for hook exit code cases by @gundermanc in
+  [#17041](https://github.com/google-gemini/gemini-cli/pull/17041)
+- Revert "Revert "Update extension examples"" by @chrstnb in
+  [#16445](https://github.com/google-gemini/gemini-cli/pull/16445)
+- fix(core): Provide compact, actionable errors for agent delegation failures by
   @SandyTao520 in
-  [#15829](https://github.com/google-gemini/gemini-cli/pull/15829)
-- feat(cli): add /chat debug command for nightly builds by @abhipatel12 in
-  [#16339](https://github.com/google-gemini/gemini-cli/pull/16339)
-- style: format pr-creator skill by @NTaylorMullen in
-  [#16381](https://github.com/google-gemini/gemini-cli/pull/16381)
-- feat(cli): Hooks enable-all/disable-all feature with dynamic status by
-  @AbdulTawabJuly in
-  [#15552](https://github.com/google-gemini/gemini-cli/pull/15552)
-- fix(core): ensure silent local subagent delegation while allowing remote
-  confirmation by @adamfweidman in
-  [#16395](https://github.com/google-gemini/gemini-cli/pull/16395)
-- Markdown w/ Frontmatter Agent Parser by @sehoon38 in
-  [#16094](https://github.com/google-gemini/gemini-cli/pull/16094)
-- Fix crash on unicode character by @chrstnb in
-  [#16420](https://github.com/google-gemini/gemini-cli/pull/16420)
-- Attempt to resolve OOM w/ useMemo on history items by @chrstnb in
-  [#16424](https://github.com/google-gemini/gemini-cli/pull/16424)
-- fix(core): ensure sub-agent schema and prompt refresh during runtime by
-  @adamfweidman in
-  [#16409](https://github.com/google-gemini/gemini-cli/pull/16409)
-- Update extension examples by @chrstnb in
-  [#16274](https://github.com/google-gemini/gemini-cli/pull/16274)
-- revert the change that was recently added from a fix by @sehoon38 in
-  [#16390](https://github.com/google-gemini/gemini-cli/pull/16390)
-- Add other hook wrapper methods to hooksystem by @ved015 in
-  [#16361](https://github.com/google-gemini/gemini-cli/pull/16361)
-- feat: introduce useRewindLogic hook for conversation history navigation by
-  @Adib234 in [#15716](https://github.com/google-gemini/gemini-cli/pull/15716)
-- docs: Fix formatting issue in memport documentation by @wanglc02 in
-  [#14774](https://github.com/google-gemini/gemini-cli/pull/14774)
-- fix(policy): enhance shell command safety and parsing by @allenhutchison in
-  [#15034](https://github.com/google-gemini/gemini-cli/pull/15034)
-- fix(core): avoid 'activate_skill' re-registration warning by @NTaylorMullen in
-  [#16398](https://github.com/google-gemini/gemini-cli/pull/16398)
-- perf(workflows): optimize PR triage script for faster execution by @bdmorgan
-  in [#16355](https://github.com/google-gemini/gemini-cli/pull/16355)
-- feat(admin): prompt user to restart the CLI if they change auth to oauth
-  mid-session or don't have auth type selected at start of session by @skeshive
-  in [#16426](https://github.com/google-gemini/gemini-cli/pull/16426)
-- Update cli-help agent's system prompt in sub-agents section by @sehoon38 in
-  [#16441](https://github.com/google-gemini/gemini-cli/pull/16441)
-- Revert "Update extension examples" by @chrstnb in
-  [#16442](https://github.com/google-gemini/gemini-cli/pull/16442)
-- Fix: add back fastreturn support by @scidomino in
-  [#16440](https://github.com/google-gemini/gemini-cli/pull/16440)
-- feat(a2a): Introduce /memory command for a2a server by @cocosheng-g in
-  [#14456](https://github.com/google-gemini/gemini-cli/pull/14456)
-- docs: fix broken internal link by using relative path by @Gong-Mi in
-  [#15371](https://github.com/google-gemini/gemini-cli/pull/15371)
-- migrate yolo/auto-edit keybindings by @scidomino in
-  [#16457](https://github.com/google-gemini/gemini-cli/pull/16457)
-- feat(cli): add install and uninstall commands for skills by @NTaylorMullen in
-  [#16377](https://github.com/google-gemini/gemini-cli/pull/16377)
-- feat(ui): use Tab to switch focus between shell and input by @jacob314 in
-  [#14332](https://github.com/google-gemini/gemini-cli/pull/14332)
-- feat(core): support shipping built-in skills with the CLI by @NTaylorMullen in
-  [#16300](https://github.com/google-gemini/gemini-cli/pull/16300)
-- Collect hardware details telemetry. by @gundermanc in
-  [#16119](https://github.com/google-gemini/gemini-cli/pull/16119)
-- feat(agents): improve UI feedback and parser reliability by @NTaylorMullen in
-  [#16459](https://github.com/google-gemini/gemini-cli/pull/16459)
-- Migrate keybindings by @scidomino in
-  [#16460](https://github.com/google-gemini/gemini-cli/pull/16460)
-- feat(cli): cleanup activity logs alongside session files by @SandyTao520 in
-  [#16399](https://github.com/google-gemini/gemini-cli/pull/16399)
-- feat(cli): implement dynamic terminal tab titles for CLI status by
-  @NTaylorMullen in
-  [#16378](https://github.com/google-gemini/gemini-cli/pull/16378)
-- feat(core): add disableLLMCorrection setting to skip auto-correction in edit
-  tools by @SandyTao520 in
-  [#16000](https://github.com/google-gemini/gemini-cli/pull/16000)
-- fix: Set both tab and window title instead of just window title by
-  @NTaylorMullen in
-  [#16464](https://github.com/google-gemini/gemini-cli/pull/16464)
-- fix(policy): ensure MCP policies match unqualified names in non-interactive
-  mode by @NTaylorMullen in
-  [#16490](https://github.com/google-gemini/gemini-cli/pull/16490)
-- fix(cli): refine 'Action Required' indicator and focus hints by @NTaylorMullen
-  in [#16497](https://github.com/google-gemini/gemini-cli/pull/16497)
-- Refactor beforeAgent and afterAgent hookEvents to follow desired output by
-  @ved015 in [#16495](https://github.com/google-gemini/gemini-cli/pull/16495)
-- feat(agents): clarify mandatory YAML frontmatter for sub-agents by
-  @NTaylorMullen in
-  [#16515](https://github.com/google-gemini/gemini-cli/pull/16515)
-- docs(telemetry): add Google Cloud Monitoring dashboard documentation by @jerop
-  in [#16520](https://github.com/google-gemini/gemini-cli/pull/16520)
-- Implement support for subagents as extensions. by @gundermanc in
-  [#16473](https://github.com/google-gemini/gemini-cli/pull/16473)
-- refactor: make baseTimestamp optional in addItem and remove redundant calls by
-  @sehoon38 in [#16471](https://github.com/google-gemini/gemini-cli/pull/16471)
-- Improve key binding names and descriptions by @scidomino in
-  [#16529](https://github.com/google-gemini/gemini-cli/pull/16529)
-- feat(core, cli): Add support for agents in settings.json. by @joshualitt in
-  [#16433](https://github.com/google-gemini/gemini-cli/pull/16433)
-- fix(cli): fix 'gemini skills install' unknown argument error by @NTaylorMullen
-  in [#16537](https://github.com/google-gemini/gemini-cli/pull/16537)
-- chore(ui): optimize AgentsStatus layout with dense list style and group
-  separation by @adamfweidman in
-  [#16545](https://github.com/google-gemini/gemini-cli/pull/16545)
-- fix(cli): allow @ file selector on slash command lines by @galz10 in
-  [#16370](https://github.com/google-gemini/gemini-cli/pull/16370)
-- fix(ui): resolve sticky header regression in tool messages by @jacob314 in
-  [#16514](https://github.com/google-gemini/gemini-cli/pull/16514)
-- feat(core): Align internal agent settings with configs exposed through
-  settings.json by @joshualitt in
-  [#16458](https://github.com/google-gemini/gemini-cli/pull/16458)
-- fix(cli): copy uses OSC52 only in SSH/WSL by @assagman in
-  [#16554](https://github.com/google-gemini/gemini-cli/pull/16554)
-- docs(skills): clarify skill directory structure and file location by
-  @NTaylorMullen in
-  [#16532](https://github.com/google-gemini/gemini-cli/pull/16532)
-- Fix: make ctrl+x use preferred editor by @scidomino in
-  [#16556](https://github.com/google-gemini/gemini-cli/pull/16556)
-- fix(core): Resolve race condition in tool response reporting by @abhipatel12
-  in [#16557](https://github.com/google-gemini/gemini-cli/pull/16557)
-- feat(ui): highlight persist mode status in ModelDialog by @sehoon38 in
-  [#16483](https://github.com/google-gemini/gemini-cli/pull/16483)
-- refactor: clean up A2A task output for users and LLMs by @adamfweidman in
-  [#16561](https://github.com/google-gemini/gemini-cli/pull/16561)
-- feat(core/ui): enhance retry mechanism and UX by @sehoon38 in
-  [#16489](https://github.com/google-gemini/gemini-cli/pull/16489)
-- Modernize MaxSizedBox to use and ResizeObservers by @jacob314 in
-  [#16565](https://github.com/google-gemini/gemini-cli/pull/16565)
-- Behavioral evals framework. by @gundermanc in
-  [#16047](https://github.com/google-gemini/gemini-cli/pull/16047)
-- Aggregate test results. by @gundermanc in
-  [#16581](https://github.com/google-gemini/gemini-cli/pull/16581)
-- feat(admin): support admin-enforced settings for Agent Skills by
-  @NTaylorMullen in
-  [#16406](https://github.com/google-gemini/gemini-cli/pull/16406)
-- fix(patch): cherry-pick cfdc4cf to release/v0.25.0-preview.0-pr-16759 to patch
-  version v0.25.0-preview.0 and create version 0.25.0-preview.1 by
-  @gemini-cli-robot in
-  [#16866](https://github.com/google-gemini/gemini-cli/pull/16866)
-- Patch #16730 into v0.25.0 preview by @chrstnb in
-  [#16882](https://github.com/google-gemini/gemini-cli/pull/16882)
-- fix(patch): cherry-pick 3b55581 to release/v0.25.0-preview.2-pr-16506 to patch
-  version v0.25.0-preview.2 and create version 0.25.0-preview.3 by
-  @gemini-cli-robot in
-  [#17098](https://github.com/google-gemini/gemini-cli/pull/17098)
+  [#16493](https://github.com/google-gemini/gemini-cli/pull/16493)
+- fix: migrate BeforeModel and AfterModel hooks to HookSystem by @ved015 in
+  [#16599](https://github.com/google-gemini/gemini-cli/pull/16599)
+- feat(admin): apply admin settings to gemini skills/mcp/extensions commands by
+  @skeshive in [#17102](https://github.com/google-gemini/gemini-cli/pull/17102)
+- fix(core): update telemetry token count after session resume by @psinha40898
+  in [#15491](https://github.com/google-gemini/gemini-cli/pull/15491)
+- Demote the subagent test to nightly by @gundermanc in
+  [#17105](https://github.com/google-gemini/gemini-cli/pull/17105)
+- feat(plan): telemetry to track adoption and usage of plan mode by @Adib234 in
+  [#16863](https://github.com/google-gemini/gemini-cli/pull/16863)
+- feat: Add flash lite utility fallback chain by @adamfweidman in
+  [#17056](https://github.com/google-gemini/gemini-cli/pull/17056)
+- Fixes Windows crash: "Cannot resize a pty that has already exited" by @dzammit
+  in [#15757](https://github.com/google-gemini/gemini-cli/pull/15757)
+- feat(core): Add initial eval for generalist agent. by @joshualitt in
+  [#16856](https://github.com/google-gemini/gemini-cli/pull/16856)
+- feat(core): unify agent enabled and disabled flags by @SandyTao520 in
+  [#17127](https://github.com/google-gemini/gemini-cli/pull/17127)
+- fix(core): resolve auto model in default strategy by @sehoon38 in
+  [#17116](https://github.com/google-gemini/gemini-cli/pull/17116)
+- docs: update project context and pr-creator workflow by @NTaylorMullen in
+  [#17119](https://github.com/google-gemini/gemini-cli/pull/17119)
+- fix(cli): send gemini-cli version as mcp client version by @dsp in
+  [#13407](https://github.com/google-gemini/gemini-cli/pull/13407)
+- fix(cli): resolve Ctrl+Enter and Ctrl+J newline issues by @imadraude in
+  [#17021](https://github.com/google-gemini/gemini-cli/pull/17021)
+- Remove missing sidebar item by @chrstnb in
+  [#17145](https://github.com/google-gemini/gemini-cli/pull/17145)
+- feat(core): Ensure all properties in hooks object are event names. by
+  @joshualitt in
+  [#16870](https://github.com/google-gemini/gemini-cli/pull/16870)
+- fix(cli): fix newline support broken in previous PR by @scidomino in
+  [#17159](https://github.com/google-gemini/gemini-cli/pull/17159)
+- Add interactive ValidationDialog for handling 403 VALIDATION_REQUIRED errors.
+  by @gsquared94 in
+  [#16231](https://github.com/google-gemini/gemini-cli/pull/16231)
+- Add Esc-Esc to clear prompt when it's not empty by @Adib234 in
+  [#17131](https://github.com/google-gemini/gemini-cli/pull/17131)
+- Avoid spurious warnings about unexpected renders triggered by appEvents and
+  coreEvents. by @jacob314 in
+  [#17160](https://github.com/google-gemini/gemini-cli/pull/17160)
+- fix(cli): resolve home/end keybinding conflict by @scidomino in
+  [#17124](https://github.com/google-gemini/gemini-cli/pull/17124)
+- fix(cli): display 'http' type on mcp list by @pamanta in
+  [#16915](https://github.com/google-gemini/gemini-cli/pull/16915)
+- fix bad fallback logic external editor logic by @scidomino in
+  [#17166](https://github.com/google-gemini/gemini-cli/pull/17166)
+- Fix bug where System scopes weren't migrated. by @jacob314 in
+  [#17174](https://github.com/google-gemini/gemini-cli/pull/17174)
+- Fix mcp tool lookup in tool registry by @werdnum in
+  [#17054](https://github.com/google-gemini/gemini-cli/pull/17054)
 
 **Full changelog**:
-https://github.com/google-gemini/gemini-cli/compare/v0.24.5...v0.25.0
+https://github.com/google-gemini/gemini-cli/compare/v0.25.2...v0.26.0

docs/changelogs/preview.md

@@ -1,6 +1,6 @@
-# Preview release: Release v0.26.0-preview.0
+# Preview release: Release v0.27.0-preview.0
 
-Released: January 21, 2026
+Released: January 27, 2026
 
 Our preview release includes the latest, new, and experimental features. This
 release may not be as stable as our [latest weekly release](latest.md).
@@ -13,320 +13,425 @@ npm install -g @google/gemini-cli@preview
 
 ## Highlights
 
-- **Skills and Agents:** Improvements to the `activate_skill` tool and skill
-  management. Experimental Agent Skills support.
-- **UI/UX:** Addition of a Rewind Confirmation dialog and Viewer component.
-- **Extensions:** Experimental setting for extension configuration.
-- **Bug Fixes and Stability:** PDF token estimation fix and improvements to
-  scheduled issue triage.
+- **Event-Driven Architecture:** The tool execution scheduler is now
+  event-driven, improving performance and reliability.
+- **System Prompt Override:** Now supports dynamic variable substitution.
+- **Rewind Command:** The `/rewind` command has been implemented.
+- **Linux Clipboard:** Image pasting capabilities for Wayland and X11 on Linux.
 
 ## What's Changed
 
-- fix: PDF token estimation
-  ([#16494](https://github.com/google-gemini/gemini-cli/pull/16494)) by
-  @korade-krushna in
-  [#16527](https://github.com/google-gemini/gemini-cli/pull/16527)
-- chore(release): bump version to 0.26.0-nightly.20260114.bb6c57414 by
+- remove fireAgent and beforeAgent hook by @ishaanxgupta in
+  [#16919](https://github.com/google-gemini/gemini-cli/pull/16919)
+- Remove unused modelHooks and toolHooks by @ved015 in
+  [#17115](https://github.com/google-gemini/gemini-cli/pull/17115)
+- feat(cli): sanitize ANSI escape sequences in non-interactive output by
+  @sehoon38 in [#17172](https://github.com/google-gemini/gemini-cli/pull/17172)
+- Update Attempt text to Retry when showing the retry happening to the … by
+  @sehoon38 in [#17178](https://github.com/google-gemini/gemini-cli/pull/17178)
+- chore(skills): update pr-creator skill workflow by @sehoon38 in
+  [#17180](https://github.com/google-gemini/gemini-cli/pull/17180)
+- feat(cli): implement event-driven tool execution scheduler by @abhipatel12 in
+  [#17078](https://github.com/google-gemini/gemini-cli/pull/17078)
+- chore(release): bump version to 0.27.0-nightly.20260121.97aac696f by
   @gemini-cli-robot in
-  [#16604](https://github.com/google-gemini/gemini-cli/pull/16604)
-- docs: clarify F12 to open debug console by @jackwotherspoon in
-  [#16570](https://github.com/google-gemini/gemini-cli/pull/16570)
-- docs: Remove .md extension from internal links in architecture.md by
-  @medic-code in
-  [#12899](https://github.com/google-gemini/gemini-cli/pull/12899)
-- Add an experimental setting for extension config by @chrstnb in
-  [#16506](https://github.com/google-gemini/gemini-cli/pull/16506)
-- feat: add Rewind Confirmation dialog and Rewind Viewer component by @Adib234
-  in [#15717](https://github.com/google-gemini/gemini-cli/pull/15717)
-- fix(a2a): Don't throw errors for GeminiEventType Retry and InvalidStream. by
-  @ehedlund in [#16541](https://github.com/google-gemini/gemini-cli/pull/16541)
-- prefactor: add rootCommands as array so it can be used for policy parsing by
+  [#17181](https://github.com/google-gemini/gemini-cli/pull/17181)
+- Remove other rewind reference in docs by @chrstnb in
+  [#17149](https://github.com/google-gemini/gemini-cli/pull/17149)
+- feat(skills): add code-reviewer skill by @sehoon38 in
+  [#17187](httpshttps://github.com/google-gemini/gemini-cli/pull/17187)
+- feat(plan): Extend Shift+Tab Mode Cycling to include Plan Mode by @Adib234 in
+  [#17177](https://github.com/google-gemini/gemini-cli/pull/17177)
+- feat(plan): refactor TestRig and eval helper to support configurable approval
+  modes by @jerop in
+  [#17171](https://github.com/google-gemini/gemini-cli/pull/17171)
+- feat(workflows): support recursive workstream labeling and new IDs by
+  @bdmorgan in [#17207](https://github.com/google-gemini/gemini-cli/pull/17207)
+- Run evals for all models. by @gundermanc in
+  [#17123](https://github.com/google-gemini/gemini-cli/pull/17123)
+- fix(github): improve label-workstream-rollup efficiency with GraphQL by
+  @bdmorgan in [#17217](https://github.com/google-gemini/gemini-cli/pull/17217)
+- Docs: Update changelogs for v.0.25.0 and v0.26.0-preview.0 releases. by
+  @g-samroberts in
+  [#17215](https://github.com/google-gemini/gemini-cli/pull/17215)
+- Migrate beforeTool and afterTool hooks to hookSystem by @ved015 in
+  [#17204](https://github.com/google-gemini/gemini-cli/pull/17204)
+- fix(github): improve label-workstream-rollup efficiency and fix bugs by
+  @bdmorgan in [#17219](https://github.com/google-gemini/gemini-cli/pull/17219)
+- feat(cli): improve skill enablement/disablement verbiage by @NTaylorMullen in
+  [#17192](https://github.com/google-gemini/gemini-cli/pull/17192)
+- fix(admin): Ensure CLI commands run in non-interactive mode by @skeshive in
+  [#17218](https://github.com/google-gemini/gemini-cli/pull/17218)
+- feat(core): support dynamic variable substitution in system prompt override by
+  @NTaylorMullen in
+  [#17042](https://github.com/google-gemini/gemini-cli/pull/17042)
+- fix(core,cli): enable recursive directory access for by @galz10 in
+  [#17094](https://github.com/google-gemini/gemini-cli/pull/17094)
+- Docs: Marking for experimental features by @jkcinouye in
+  [#16760](https://github.com/google-gemini/gemini-cli/pull/16760)
+- Support command/ctrl/alt backspace correctly by @scidomino in
+  [#17175](https://github.com/google-gemini/gemini-cli/pull/17175)
+- feat(plan): add approval mode instructions to system prompt by @jerop in
+  [#17151](https://github.com/google-gemini/gemini-cli/pull/17151)
+- feat(core): enable disableLLMCorrection by default by @SandyTao520 in
+  [#17223](https://github.com/google-gemini/gemini-cli/pull/17223)
+- Remove unused slug from sidebar by @chrstnb in
+  [#17229](https://github.com/google-gemini/gemini-cli/pull/17229)
+- drain stdin on exit by @scidomino in
+  [#17241](https://github.com/google-gemini/gemini-cli/pull/17241)
+- refactor(cli): decouple UI from live tool execution via ToolActionsContext by
   @abhipatel12 in
-  [#16640](https://github.com/google-gemini/gemini-cli/pull/16640)
-- remove unnecessary \x7f key bindings by @scidomino in
-  [#16646](https://github.com/google-gemini/gemini-cli/pull/16646)
-- docs(skills): use body-file in pr-creator skill for better reliability by
+  [#17183](https://github.com/google-gemini/gemini-cli/pull/17183)
+- fix(core): update token count and telemetry on /chat resume history load by
+  @psinha40898 in
+  [#16279](https://github.com/google-gemini/gemini-cli/pull/16279)
+- fix: /policy to display policies according to mode by @ishaanxgupta in
+  [#16772](https://github.com/google-gemini/gemini-cli/pull/16772)
+- fix(core): simplify replace tool error message by @SandyTao520 in
+  [#17246](https://github.com/google-gemini/gemini-cli/pull/17246)
+- feat(cli): consolidate shell inactivity and redirection monitoring by
+  @NTaylorMullen in
+  [#17086](https://github.com/google-gemini/gemini-cli/pull/17086)
+- fix(scheduler): prevent stale tool re-publication and fix stuck UI state by
   @abhipatel12 in
-  [#16642](https://github.com/google-gemini/gemini-cli/pull/16642)
-- chore(automation): recursive labeling for workstream descendants by @bdmorgan
-  in [#16609](https://github.com/google-gemini/gemini-cli/pull/16609)
-- feat: introduce 'skill-creator' built-in skill and CJS management tools by
-  @NTaylorMullen in
-  [#16394](https://github.com/google-gemini/gemini-cli/pull/16394)
-- chore(automation): remove automated PR size and complexity labeler by
-  @bdmorgan in [#16648](https://github.com/google-gemini/gemini-cli/pull/16648)
-- refactor(skills): replace 'project' with 'workspace' scope by @NTaylorMullen
-  in [#16380](https://github.com/google-gemini/gemini-cli/pull/16380)
-- Docs: Update release notes for 1/13/2026 by @jkcinouye in
-  [#16583](https://github.com/google-gemini/gemini-cli/pull/16583)
-- Simplify paste handling by @scidomino in
-  [#16654](https://github.com/google-gemini/gemini-cli/pull/16654)
-- chore(automation): improve scheduled issue triage discovery and throughput by
-  @bdmorgan in [#16652](https://github.com/google-gemini/gemini-cli/pull/16652)
-- fix(acp): run exit cleanup when stdin closes by @codefromthecrypt in
-  [#14953](https://github.com/google-gemini/gemini-cli/pull/14953)
-- feat(scheduler): add types needed for event driven scheduler by @abhipatel12
-  in [#16641](https://github.com/google-gemini/gemini-cli/pull/16641)
-- Remove unused rewind key binding by @scidomino in
-  [#16659](https://github.com/google-gemini/gemini-cli/pull/16659)
-- Remove sequence binding by @scidomino in
-  [#16664](https://github.com/google-gemini/gemini-cli/pull/16664)
-- feat(cli): undeprecate the --prompt flag by @alexaustin007 in
-  [#13981](https://github.com/google-gemini/gemini-cli/pull/13981)
-- chore: update dependabot configuration by @cosmopax in
-  [#13507](https://github.com/google-gemini/gemini-cli/pull/13507)
-- feat(config): add 'auto' alias for default model selection by @sehoon38 in
-  [#16661](https://github.com/google-gemini/gemini-cli/pull/16661)
-- Enable & disable agents by @sehoon38 in
-  [#16225](https://github.com/google-gemini/gemini-cli/pull/16225)
-- cleanup: Improve keybindings by @scidomino in
-  [#16672](https://github.com/google-gemini/gemini-cli/pull/16672)
-- Add timeout for shell-utils to prevent hangs. by @jacob314 in
-  [#16667](https://github.com/google-gemini/gemini-cli/pull/16667)
-- feat(plan): add experimental plan flag by @jerop in
-  [#16650](https://github.com/google-gemini/gemini-cli/pull/16650)
-- feat(cli): add security consent prompts for skill installation by
-  @NTaylorMullen in
-  [#16549](https://github.com/google-gemini/gemini-cli/pull/16549)
-- fix: replace 3 consecutive periods with ellipsis character by @Vist233 in
-  [#16587](https://github.com/google-gemini/gemini-cli/pull/16587)
-- chore(automation): ensure status/need-triage is applied and never cleared
-  automatically by @bdmorgan in
-  [#16657](https://github.com/google-gemini/gemini-cli/pull/16657)
-- fix: Handle colons in skill description frontmatter by @maru0804 in
-  [#16345](https://github.com/google-gemini/gemini-cli/pull/16345)
-- refactor(core): harden skill frontmatter parsing by @NTaylorMullen in
-  [#16705](https://github.com/google-gemini/gemini-cli/pull/16705)
-- feat(skills): add conflict detection and warnings for skill overrides by
-  @NTaylorMullen in
-  [#16709](https://github.com/google-gemini/gemini-cli/pull/16709)
-- feat(scheduler): add SchedulerStateManager for reactive tool state by
-  @abhipatel12 in
-  [#16651](https://github.com/google-gemini/gemini-cli/pull/16651)
-- chore(automation): enforce 'help wanted' label permissions and update
-  guidelines by @bdmorgan in
-  [#16707](https://github.com/google-gemini/gemini-cli/pull/16707)
-- fix(core): resolve circular dependency via tsconfig paths by @sehoon38 in
-  [#16730](https://github.com/google-gemini/gemini-cli/pull/16730)
-- chore/release: bump version to 0.26.0-nightly.20260115.6cb3ae4e0 by
-  @gemini-cli-robot in
-  [#16738](https://github.com/google-gemini/gemini-cli/pull/16738)
-- fix(automation): correct status/need-issue label matching wildcard by
-  @bdmorgan in [#16727](https://github.com/google-gemini/gemini-cli/pull/16727)
-- fix(automation): prevent label-enforcer loop by ignoring all bots by @bdmorgan
-  in [#16746](https://github.com/google-gemini/gemini-cli/pull/16746)
-- Add links to supported locations and minor fixes by @g-samroberts in
-  [#16476](https://github.com/google-gemini/gemini-cli/pull/16476)
-- feat(policy): add source tracking to policy rules by @allenhutchison in
-  [#16670](https://github.com/google-gemini/gemini-cli/pull/16670)
-- feat(automation): enforce '🔒 maintainer only' and fix bot loop by @bdmorgan
-  in [#16751](https://github.com/google-gemini/gemini-cli/pull/16751)
-- Make merged settings non-nullable and fix all lints related to that. by
-  @jacob314 in [#16647](https://github.com/google-gemini/gemini-cli/pull/16647)
-- fix(core): prevent ModelInfo event emission on aborted signal by @sehoon38 in
-  [#16752](https://github.com/google-gemini/gemini-cli/pull/16752)
-- Replace relative paths to fix website build by @chrstnb in
-  [#16755](https://github.com/google-gemini/gemini-cli/pull/16755)
-- Restricting to localhost by @cocosheng-g in
-  [#16548](https://github.com/google-gemini/gemini-cli/pull/16548)
-- fix(cli): add explicit dependency on color-convert by @sehoon38 in
-  [#16757](https://github.com/google-gemini/gemini-cli/pull/16757)
-- fix(automation): robust label enforcement with permission checks by @bdmorgan
-  in [#16762](https://github.com/google-gemini/gemini-cli/pull/16762)
-- fix(cli): prevent OOM crash by limiting file search traversal and adding
-  timeout by @galz10 in
-  [#16696](https://github.com/google-gemini/gemini-cli/pull/16696)
-- fix(cli): safely handle /dev/tty access on macOS by @korade-krushna in
-  [#16531](https://github.com/google-gemini/gemini-cli/pull/16531)
-- docs: clarify workspace test execution in GEMINI.md by @mattKorwel in
-  [#16764](https://github.com/google-gemini/gemini-cli/pull/16764)
-- Add support for running available commands prior to MCP servers loading by
-  @Adib234 in [#15596](https://github.com/google-gemini/gemini-cli/pull/15596)
-- feat(plan): add experimental 'plan' approval mode by @jerop in
-  [#16753](https://github.com/google-gemini/gemini-cli/pull/16753)
-- feat(scheduler): add functional awaitConfirmation utility by @abhipatel12 in
-  [#16721](https://github.com/google-gemini/gemini-cli/pull/16721)
-- fix(infra): update maintainer rollup label to 'workstream-rollup' by @bdmorgan
-  in [#16809](https://github.com/google-gemini/gemini-cli/pull/16809)
-- fix(infra): use GraphQL to detect direct parents in rollup workflow by
-  @bdmorgan in [#16811](https://github.com/google-gemini/gemini-cli/pull/16811)
-- chore(workflows): rename label-workstream-rollup workflow by @bdmorgan in
-  [#16818](https://github.com/google-gemini/gemini-cli/pull/16818)
-- skip simple-mcp-server.test.ts by @scidomino in
-  [#16842](https://github.com/google-gemini/gemini-cli/pull/16842)
-- Steer outer agent to use expert subagents when present by @gundermanc in
-  [#16763](https://github.com/google-gemini/gemini-cli/pull/16763)
-- Fix race condition by awaiting scheduleToolCalls by @chrstnb in
-  [#16759](https://github.com/google-gemini/gemini-cli/pull/16759)
-- cleanup: Organize key bindings by @scidomino in
-  [#16798](https://github.com/google-gemini/gemini-cli/pull/16798)
-- feat(core): Add generalist agent. by @joshualitt in
-  [#16638](https://github.com/google-gemini/gemini-cli/pull/16638)
-- perf(ui): optimize text buffer and highlighting for large inputs by
-  @NTaylorMullen in
-  [#16782](https://github.com/google-gemini/gemini-cli/pull/16782)
-- fix(core): fix PTY descriptor shell leak by @galz10 in
-  [#16773](https://github.com/google-gemini/gemini-cli/pull/16773)
-- feat(plan): enforce strict read-only policy and halt execution on violation by
-  @jerop in [#16849](https://github.com/google-gemini/gemini-cli/pull/16849)
-- remove need-triage label from bug_report template by @sehoon38 in
-  [#16864](https://github.com/google-gemini/gemini-cli/pull/16864)
-- fix(core): truncate large telemetry log entries by @sehoon38 in
-  [#16769](https://github.com/google-gemini/gemini-cli/pull/16769)
-- docs(extensions): add Agent Skills support and mark feature as experimental by
-  @NTaylorMullen in
-  [#16859](https://github.com/google-gemini/gemini-cli/pull/16859)
-- fix(core): surface warnings for invalid hook event names in configuration
-  ([#16788](https://github.com/google-gemini/gemini-cli/pull/16788)) by
-  @sehoon38 in [#16873](https://github.com/google-gemini/gemini-cli/pull/16873)
-- feat(plan): remove read_many_files from approval mode policies by @jerop in
-  [#16876](https://github.com/google-gemini/gemini-cli/pull/16876)
-- feat(admin): implement admin controls polling and restart prompt by @skeshive
-  in [#16627](https://github.com/google-gemini/gemini-cli/pull/16627)
-- Remove LRUCache class migrating to mnemoist by @jacob314 in
-  [#16872](https://github.com/google-gemini/gemini-cli/pull/16872)
-- feat(settings): rename negative settings to positive naming (disable* ->
-  enable*) by @afarber in
-  [#14142](https://github.com/google-gemini/gemini-cli/pull/14142)
-- refactor(cli): unify shell confirmation dialogs by @NTaylorMullen in
-  [#16828](https://github.com/google-gemini/gemini-cli/pull/16828)
-- feat(agent): enable agent skills by default by @NTaylorMullen in
-  [#16736](https://github.com/google-gemini/gemini-cli/pull/16736)
-- refactor(core): foundational truncation refactoring and token estimation
-  optimization by @NTaylorMullen in
-  [#16824](https://github.com/google-gemini/gemini-cli/pull/16824)
-- fix(hooks): enable /hooks disable to reliably stop single hooks by
-  @abhipatel12 in
-  [#16804](https://github.com/google-gemini/gemini-cli/pull/16804)
-- Don't commit unless user asks us to. by @gundermanc in
-  [#16902](https://github.com/google-gemini/gemini-cli/pull/16902)
-- chore: remove a2a-adapter and bump @a2a-js/sdk to 0.3.8 by @adamfweidman in
-  [#16800](https://github.com/google-gemini/gemini-cli/pull/16800)
-- fix: Show experiment values in settings UI for compressionThreshold by
-  @ishaanxgupta in
-  [#16267](https://github.com/google-gemini/gemini-cli/pull/16267)
-- feat(cli): replace relative keyboard shortcuts link with web URL by
-  @imaliabbas in
-  [#16479](https://github.com/google-gemini/gemini-cli/pull/16479)
-- fix(core): resolve PKCE length issue and stabilize OAuth redirect port by
-  @sehoon38 in [#16815](https://github.com/google-gemini/gemini-cli/pull/16815)
-- Delete rewind documentation for now by @Adib234 in
-  [#16932](https://github.com/google-gemini/gemini-cli/pull/16932)
-- Stabilize skill-creator CI and package format by @NTaylorMullen in
-  [#17001](https://github.com/google-gemini/gemini-cli/pull/17001)
-- Stabilize the git evals by @gundermanc in
-  [#16989](https://github.com/google-gemini/gemini-cli/pull/16989)
-- fix(core): attempt compression before context overflow check by @NTaylorMullen
-  in [#16914](https://github.com/google-gemini/gemini-cli/pull/16914)
-- Fix inverted logic. by @gundermanc in
-  [#17007](https://github.com/google-gemini/gemini-cli/pull/17007)
-- chore(scripts): add duplicate issue closer script and fix lint errors by
-  @bdmorgan in [#16997](https://github.com/google-gemini/gemini-cli/pull/16997)
-- docs: update README and config guide to reference Gemini 3 by @JayadityaGit in
-  [#15806](https://github.com/google-gemini/gemini-cli/pull/15806)
-- fix(cli): correct Homebrew installation detection by @kij in
-  [#14727](https://github.com/google-gemini/gemini-cli/pull/14727)
-- Demote git evals to nightly run. by @gundermanc in
-  [#17030](https://github.com/google-gemini/gemini-cli/pull/17030)
-- fix(cli): use OSC-52 clipboard copy in Windows Terminal by @Thomas-Shephard in
-  [#16920](https://github.com/google-gemini/gemini-cli/pull/16920)
-- Fix: Process all parts in response chunks when thought is first by @pyrytakala
-  in [#13539](https://github.com/google-gemini/gemini-cli/pull/13539)
-- fix(automation): fix jq quoting error in pr-triage.sh by @Kimsoo0119 in
-  [#16958](https://github.com/google-gemini/gemini-cli/pull/16958)
-- refactor(core): decouple scheduler into orchestration, policy, and
-  confirmation by @abhipatel12 in
-  [#16895](https://github.com/google-gemini/gemini-cli/pull/16895)
-- feat: add /introspect slash command by @NTaylorMullen in
-  [#17048](https://github.com/google-gemini/gemini-cli/pull/17048)
-- refactor(cli): centralize tool mapping and decouple legacy scheduler by
-  @abhipatel12 in
-  [#17044](https://github.com/google-gemini/gemini-cli/pull/17044)
-- fix(ui): ensure rationale renders before tool calls by @NTaylorMullen in
-  [#17043](https://github.com/google-gemini/gemini-cli/pull/17043)
-- fix(workflows): use author_association for maintainer check by @bdmorgan in
-  [#17060](https://github.com/google-gemini/gemini-cli/pull/17060)
-- fix return type of fireSessionStartEvent to defaultHookOutput by @ved015 in
-  [#16833](https://github.com/google-gemini/gemini-cli/pull/16833)
-- feat(cli): add experiment gate for event-driven scheduler by @abhipatel12 in
-  [#17055](https://github.com/google-gemini/gemini-cli/pull/17055)
-- feat(core): improve shell redirection transparency and security by
-  @NTaylorMullen in
-  [#16486](https://github.com/google-gemini/gemini-cli/pull/16486)
-- fix(core): deduplicate ModelInfo emission in GeminiClient by @NTaylorMullen in
-  [#17075](https://github.com/google-gemini/gemini-cli/pull/17075)
-- docs(themes): remove unsupported DiffModified color key by @jw409 in
-  [#17073](https://github.com/google-gemini/gemini-cli/pull/17073)
-- fix: update currentSequenceModel when modelChanged by @adamfweidman in
-  [#17051](https://github.com/google-gemini/gemini-cli/pull/17051)
-- feat(core): enhanced anchored iterative context compression with
-  self-verification by @rmedranollamas in
-  [#15710](https://github.com/google-gemini/gemini-cli/pull/15710)
-- Fix mcp instructions by @chrstnb in
-  [#16439](https://github.com/google-gemini/gemini-cli/pull/16439)
-- [A2A] Disable checkpointing if git is not installed by @cocosheng-g in
-  [#16896](https://github.com/google-gemini/gemini-cli/pull/16896)
-- feat(admin): set admin.skills.enabled based on advancedFeaturesEnabled setting
-  by @skeshive in
-  [#17095](https://github.com/google-gemini/gemini-cli/pull/17095)
-- Test coverage for hook exit code cases by @gundermanc in
-  [#17041](https://github.com/google-gemini/gemini-cli/pull/17041)
-- Revert "Revert "Update extension examples"" by @chrstnb in
-  [#16445](https://github.com/google-gemini/gemini-cli/pull/16445)
-- fix(core): Provide compact, actionable errors for agent delegation failures by
+  [#17227](https://github.com/google-gemini/gemini-cli/pull/17227)
+- feat(config): default enableEventDrivenScheduler to true by @abhipatel12 in
+  [#17211](https://github.com/google-gemini/gemini-cli/pull/17211)
+- feat(hooks): enable hooks system by default by @abhipatel12 in
+  [#17247](https://github.com/google-gemini/gemini-cli/pull/17247)
+- feat(core): Enable AgentRegistry to track all discovered subagents by
   @SandyTao520 in
-  [#16493](https://github.com/google-gemini/gemini-cli/pull/16493)
-- fix: migrate BeforeModel and AfterModel hooks to HookSystem by @ved015 in
-  [#16599](https://github.com/google-gemini/gemini-cli/pull/16599)
-- feat(admin): apply admin settings to gemini skills/mcp/extensions commands by
-  @skeshive in [#17102](https://github.com/google-gemini/gemini-cli/pull/17102)
-- fix(core): update telemetry token count after session resume by @psinha40898
-  in [#15491](https://github.com/google-gemini/gemini-cli/pull/15491)
-- Demote the subagent test to nightly by @gundermanc in
-  [#17105](https://github.com/google-gemini/gemini-cli/pull/17105)
-- feat(plan): telemetry to track adoption and usage of plan mode by @Adib234 in
-  [#16863](https://github.com/google-gemini/gemini-cli/pull/16863)
-- feat: Add flash lite utility fallback chain by @adamfweidman in
-  [#17056](https://github.com/google-gemini/gemini-cli/pull/17056)
-- Fixes Windows crash: "Cannot resize a pty that has already exited" by @dzammit
-  in [#15757](https://github.com/google-gemini/gemini-cli/pull/15757)
-- feat(core): Add initial eval for generalist agent. by @joshualitt in
-  [#16856](https://github.com/google-gemini/gemini-cli/pull/16856)
-- feat(core): unify agent enabled and disabled flags by @SandyTao520 in
-  [#17127](https://github.com/google-gemini/gemini-cli/pull/17127)
-- fix(core): resolve auto model in default strategy by @sehoon38 in
-  [#17116](https://github.com/google-gemini/gemini-cli/pull/17116)
-- docs: update project context and pr-creator workflow by @NTaylorMullen in
-  [#17119](https://github.com/google-gemini/gemini-cli/pull/17119)
-- fix(cli): send gemini-cli version as mcp client version by @dsp in
-  [#13407](https://github.com/google-gemini/gemini-cli/pull/13407)
-- fix(cli): resolve Ctrl+Enter and Ctrl+J newline issues by @imadraude in
-  [#17021](https://github.com/google-gemini/gemini-cli/pull/17021)
-- Remove missing sidebar item by @chrstnb in
-  [#17145](https://github.com/google-gemini/gemini-cli/pull/17145)
-- feat(core): Ensure all properties in hooks object are event names. by
-  @joshualitt in
-  [#16870](https://github.com/google-gemini/gemini-cli/pull/16870)
-- fix(cli): fix newline support broken in previous PR by @scidomino in
-  [#17159](https://github.com/google-gemini/gemini-cli/pull/17159)
-- Add interactive ValidationDialog for handling 403 VALIDATION_REQUIRED errors.
-  by @gsquared94 in
-  [#16231](https://github.com/google-gemini/gemini-cli/pull/16231)
-- Add Esc-Esc to clear prompt when it's not empty by @Adib234 in
-  [#17131](https://github.com/google-gemini/gemini-cli/pull/17131)
-- Avoid spurious warnings about unexpected renders triggered by appEvents and
-  coreEvents. by @jacob314 in
-  [#17160](https://github.com/google-gemini/gemini-cli/pull/17160)
-- fix(cli): resolve home/end keybinding conflict by @scidomino in
-  [#17124](https://github.com/google-gemini/gemini-cli/pull/17124)
-- fix(cli): display 'http' type on mcp list by @pamanta in
-  [#16915](https://github.com/google-gemini/gemini-cli/pull/16915)
-- fix bad fallback logic external editor logic by @scidomino in
-  [#17166](https://github.com/google-gemini/gemini-cli/pull/17166)
-- Fix bug where System scopes weren't migrated. by @jacob314 in
-  [#17174](https://github.com/google-gemini/gemini-cli/pull/17174)
-- Fix mcp tool lookup in tool registry by @werdnum in
-  [#17054](https://github.com/google-gemini/gemini-cli/pull/17054)
+  [#17253](https://github.com/google-gemini/gemini-cli/pull/17253)
+- feat(core): Have subagents use a JSON schema type for input. by @joshualitt in
+  [#17152](https://github.com/google-gemini/gemini-cli/pull/17152)
+- feat: replace large text pastes with [Pasted Text: X lines] placeholder by
+  @jackwotherspoon in
+  [#16422](https://github.com/google-gemini/gemini-cli/pull/16422)
+- security(hooks): Wrap hook-injected context in distinct XML tags by @yunaseoul
+  in [#17237](https://github.com/google-gemini/gemini-cli/pull/17237)
+- Enable the ability to queue specific nightly eval tests by @gundermanc in
+  [#17262](https://github.com/google-gemini/gemini-cli/pull/17262)
+- docs(hooks): comprehensive update of hook documentation and specs by
+  @abhipatel12 in
+  [#16816](https://github.com/google-gemini/gemini-cli/pull/16816)
+- refactor: improve large text paste placeholder by @jacob314 in
+  [#17269](https://github.com/google-gemini/gemini-cli/pull/17269)
+- feat: implement /rewind command by @Adib234 in
+  [#15720](https://github.com/google-gemini/gemini-cli/pull/15720)
+- Feature/jetbrains ide detection by @SoLoHiC in
+  [#16243](https://github.com/google-gemini/gemini-cli/pull/16243)
+- docs: update typo in mcp-server.md file by @schifferl in
+  [#17099](https://github.com/google-gemini/gemini-cli/pull/17099)
+- Sanitize command names and descriptions by @ehedlund in
+  [#17228](https://github.com/google-gemini/gemini-cli/pull/17228)
+- fix(auth): don't crash when initial auth fails by @skeshive in
+  [#17308](https://github.com/google-gemini/gemini-cli/pull/17308)
+- Added image pasting capabilities for Wayland and X11 on Linux by @devr0306 in
+  [#17144](https://github.com/google-gemini/gemini-cli/pull/17144)
+- feat: add AskUser tool schema by @jackwotherspoon in
+  [#16988](https://github.com/google-gemini/gemini-cli/pull/16988)
+- fix cli settings: resolve layout jitter in settings bar by @Mag1ck in
+  [#16256](https://github.com/google-gemini/gemini-cli/pull/16256)
+- fix: show whitespace changes in edit tool diffs by @Ujjiyara in
+  [#17213](https://github.com/google-gemini/gemini-cli/pull/17213)
+- Remove redundant calls setting linuxClipboardTool. getUserLinuxClipboardTool()
+  now handles the caching internally by @jacob314 in
+  [#17320](https://github.com/google-gemini/gemini-cli/pull/17320)
+- ci: allow failure in evals-nightly run step by @gundermanc in
+  [#17319](https://github.com/google-gemini/gemini-cli/pull/17319)
+- feat(cli): Add state management and plumbing for agent configuration dialog by
+  @SandyTao520 in
+  [#17259](https://github.com/google-gemini/gemini-cli/pull/17259)
+- bug: fix ide-client connection to ide-companion when inside docker via
+  ssh/devcontainer by @kapsner in
+  [#15049](https://github.com/google-gemini/gemini-cli/pull/15049)
+- Emit correct newline type return by @scidomino in
+  [#17331](https://github.com/google-gemini/gemini-cli/pull/17331)
+- New skill: docs-writer by @g-samroberts in
+  [#17268](https://github.com/google-gemini/gemini-cli/pull/17268)
+- fix(core): Resolve AbortSignal MaxListenersExceededWarning (#5950) by
+  @spencer426 in
+  [#16735](https://github.com/google-gemini/gemini-cli/pull/16735)
+- Disable tips after 10 runs by @Adib234 in
+  [#17101](https://github.com/google-gemini/gemini-cli/pull/17101)
+- Fix so rewind starts at the bottom and loadHistory refreshes static content.
+  by @jacob314 in
+  [#17335](https://github.com/google-gemini/gemini-cli/pull/17335)
+- feat(core): Remove legacy settings. by @joshualitt in
+  [#17244](https://github.com/google-gemini/gemini-cli/pull/17244)
+- feat(plan): add 'communicate' tool kind by @jerop in
+  [#17341](https://github.com/google-gemini/gemini-cli/pull/17341)
+- feat(routing): A/B Test Numerical Complexity Scoring for Gemini 3 by
+  @mattKorwel in
+  [#16041](https://github.com/google-gemini/gemini-cli/pull/16041)
+- feat(plan): update UI Theme for Plan Mode by @Adib234 in
+  [#17243](https://github.com/google-gemini/gemini-cli/pull/17243)
+- fix(ui): stabilize rendering during terminal resize in alternate buffer by
+  @lkk214 in [#15783](https://github.com/google-gemini/gemini-cli/pull/15783)
+- feat(cli): add /agents config command and improve agent discovery by
+  @SandyTao520 in
+  [#17342](https://github.com/google-gemini/gemini-cli/pull/17342)
+- feat(mcp): add enable/disable commands for MCP servers (#11057) by @jasmeetsb
+  in [#16299](https://github.com/google-gemini/gemini-cli/pull/16299)
+- fix(cli)!: Default to interactive mode for positional arguments by
+  @ishaanxgupta in
+  [#16329](https://github.com/google-gemini/gemini-cli/pull/16329)
+- Fix issue #17080 by @jacob314 in
+  [#17100](https://github.com/google-gemini/gemini-cli/pull/17100)
+- feat(core): Refresh agents after loading an extension. by @joshualitt in
+  [#17355](https://github.com/google-gemini/gemini-cli/pull/17355)
+- fix(cli): include source in policy rule display by @allenhutchison in
+  [#17358](https://github.com/google-gemini/gemini-cli/pull/17358)
+- fix: remove obsolete CloudCode PerDay quota and 120s terminal threshold by
+  @gsquared94 in
+  [#17236](https://github.com/google-gemini/gemini-cli/pull/17236)
+- Refactor subagent delegation to be one tool per agent by @gundermanc in
+  [#17346](https://github.com/google-gemini/gemini-cli/pull/17346)
+- fix(core): Include MCP server name in OAuth message by @jerop in
+  [#17351](https://github.com/google-gemini/gemini-cli/pull/17351)
+- Fix pr-triage.sh script to update pull requests with tags "help wanted" and
+  "maintainer only" by @jacob314 in
+  [#17324](https://github.com/google-gemini/gemini-cli/pull/17324)
+- feat(plan): implement simple workflow for planning in main agent by @jerop in
+  [#17326](https://github.com/google-gemini/gemini-cli/pull/17326)
+- fix: exit with non-zero code when esbuild is missing by @yuvrajangadsingh in
+  [#16967](https://github.com/google-gemini/gemini-cli/pull/16967)
+- fix: ensure @docs/cli/custom-commands.md UI message ordering and test by
+  @medic-code in
+  [#12038](https://github.com/google-gemini/gemini-cli/pull/12038)
+- fix(core): add alternative command names for Antigravity editor detec… by
+  @BaeSeokJae in
+  [#16829](https://github.com/google-gemini/gemini-cli/pull/16829)
+- Refactor: Migrate CLI appEvents to Core coreEvents by @Adib234 in
+  [#15737](https://github.com/google-gemini/gemini-cli/pull/15737)
+- fix(core): await MCP initialization in non-interactive mode by @Ratish1 in
+  [#17390](https://github.com/google-gemini/gemini-cli/pull/17390)
+- Fix modifyOtherKeys enablement on unsupported terminals by @seekskyworld in
+  [#16714](https://github.com/google-gemini/gemini-cli/pull/16714)
+- fix(core): gracefully handle disk full errors in chat recording by
+  @godwiniheuwa in
+  [#17305](https://github.com/google-gemini/gemini-cli/pull/17305)
+- fix(oauth): update oauth to use 127.0.0.1 instead of localhost by @skeshive in
+  [#17388](https://github.com/google-gemini/gemini-cli/pull/17388)
+- fix(core): use RFC 9728 compliant path-based OAuth protected resource
+  discovery by @vrv in
+  [#15756](https://github.com/google-gemini/gemini-cli/pull/15756)
+- Update Code Wiki README badge by @PatoBeltran in
+  [#15229](https://github.com/google-gemini/gemini-cli/pull/15229)
+- Add conda installation instructions for Gemini CLI by @ishaanxgupta in
+  [#16921](https://github.com/google-gemini/gemini-cli/pull/16921)
+- chore(refactor): extract BaseSettingsDialog component by @SandyTao520 in
+  [#17369](https://github.com/google-gemini/gemini-cli/pull/17369)
+- fix(cli): preserve input text when declining tool approval (#15624) by
+  @ManojINaik in
+  [#15659](https://github.com/google-gemini/gemini-cli/pull/15659)
+- chore: upgrade dep: diff 7.0.0-> 8.0.3 by @scidomino in
+  [#17403](https://github.com/google-gemini/gemini-cli/pull/17403)
+- feat: add AskUserDialog for UI component of AskUser tool by @jackwotherspoon
+  in [#17344](https://github.com/google-gemini/gemini-cli/pull/17344)
+- feat(ui): display user tier in about command by @sehoon38 in
+  [#17400](https://github.com/google-gemini/gemini-cli/pull/17400)
+- feat: add clearContext to AfterAgent hooks by @jackwotherspoon in
+  [#16574](https://github.com/google-gemini/gemini-cli/pull/16574)
+- fix(cli): change image paste location to global temp directory (#17396) by
+  @devr0306 in [#17396](https://github.com/google-gemini/gemini-cli/pull/17396)
+- Fix line endings issue with Notice file by @scidomino in
+  [#17417](https://github.com/google-gemini/gemini-cli/pull/17417)
+- feat(plan): implement persistent approvalMode setting by @Adib234 in
+  [#17350](https://github.com/google-gemini/gemini-cli/pull/17350)
+- feat(ui): Move keyboard handling into BaseSettingsDialog by @SandyTao520 in
+  [#17404](https://github.com/google-gemini/gemini-cli/pull/17404)
+- Allow prompt queueing during MCP initialization by @Adib234 in
+  [#17395](https://github.com/google-gemini/gemini-cli/pull/17395)
+- feat: implement AgentConfigDialog for /agents config command by @SandyTao520
+  in [#17370](https://github.com/google-gemini/gemini-cli/pull/17370)
+- fix(agents): default to all tools when tool list is omitted in subagents by
+  @gundermanc in
+  [#17422](https://github.com/google-gemini/gemini-cli/pull/17422)
+- feat(cli): Moves tool confirmations to a queue UX by @abhipatel12 in
+  [#17276](https://github.com/google-gemini/gemini-cli/pull/17276)
+- fix(core): hide user tier name by @sehoon38 in
+  [#17418](https://github.com/google-gemini/gemini-cli/pull/17418)
+- feat: Enforce unified folder trust for /directory add by @galz10 in
+  [#17359](https://github.com/google-gemini/gemini-cli/pull/17359)
+- migrate fireToolNotificationHook to hookSystem by @ved015 in
+  [#17398](https://github.com/google-gemini/gemini-cli/pull/17398)
+- Clean up dead code by @scidomino in
+  [#17443](https://github.com/google-gemini/gemini-cli/pull/17443)
+- feat(workflow): add stale pull request closer with linked-issue enforcement by
+  @bdmorgan in [#17449](https://github.com/google-gemini/gemini-cli/pull/17449)
+- feat(workflow): expand stale-exempt labels to include help wanted and Public
+  Roadmap by @bdmorgan in
+  [#17459](https://github.com/google-gemini/gemini-cli/pull/17459)
+- chore(workflow): remove redundant label-enforcer workflow by @bdmorgan in
+  [#17460](https://github.com/google-gemini/gemini-cli/pull/17460)
+- Resolves the confusing error message `ripgrep exited with code null that
+  occurs when a search operation is cancelled or aborted by @maximmasiutin in
+  [#14267](https://github.com/google-gemini/gemini-cli/pull/14267)
+- fix: detect pnpm/pnpx in ~/.local by @rwakulszowa in
+  [#15254](https://github.com/google-gemini/gemini-cli/pull/15254)
+- docs: Add instructions for MacPorts and uninstall instructions for Homebrew by
+  @breun in [#17412](https://github.com/google-gemini/gemini-cli/pull/17412)
+- docs(hooks): clarify mandatory 'type' field and update hook schema
+  documentation by @abhipatel12 in
+  [#17499](https://github.com/google-gemini/gemini-cli/pull/17499)
+- Improve error messages on failed onboarding by @gsquared94 in
+  [#17357](https://github.com/google-gemini/gemini-cli/pull/17357)
+- Follow up to "enableInteractiveShell for external tooling relying on a2a
+  server" by @DavidAPierce in
+  [#17130](https://github.com/google-gemini/gemini-cli/pull/17130)
+- Fix/issue 17070 by @alih552 in
+  [#17242](https://github.com/google-gemini/gemini-cli/pull/17242)
+- fix(core): handle URI-encoded workspace paths in IdeClient by @dong-jun-shin
+  in [#17476](https://github.com/google-gemini/gemini-cli/pull/17476)
+- feat(cli): add quick clear input shortcuts in vim mode by @harshanadim in
+  [#17470](https://github.com/google-gemini/gemini-cli/pull/17470)
+- feat(core): optimize shell tool llmContent output format by @SandyTao520 in
+  [#17538](https://github.com/google-gemini/gemini-cli/pull/17538)
+- Fix bug in detecting already added paths. by @jacob314 in
+  [#17430](https://github.com/google-gemini/gemini-cli/pull/17430)
+- feat(scheduler): support multi-scheduler tool aggregation and nested call IDs
+  by @abhipatel12 in
+  [#17429](https://github.com/google-gemini/gemini-cli/pull/17429)
+- feat(agents): implement first-run experience for project-level sub-agents by
+  @gundermanc in
+  [#17266](https://github.com/google-gemini/gemini-cli/pull/17266)
+- Update extensions docs by @chrstnb in
+  [#16093](https://github.com/google-gemini/gemini-cli/pull/16093)
+- Docs: Refactor left nav on the website by @jkcinouye in
+  [#17558](https://github.com/google-gemini/gemini-cli/pull/17558)
+- fix(core): stream grep/ripgrep output to prevent OOM by @adamfweidman in
+  [#17146](https://github.com/google-gemini/gemini-cli/pull/17146)
+- feat(plan): add persistent plan file storage by @jerop in
+  [#17563](https://github.com/google-gemini/gemini-cli/pull/17563)
+- feat(agents): migrate subagents to event-driven scheduler by @abhipatel12 in
+  [#17567](https://github.com/google-gemini/gemini-cli/pull/17567)
+- Fix extensions config error by @chrstnb in
+  [#17580](https://github.com/google-gemini/gemini-cli/pull/17580)
+- fix(plan): remove subagent invocation from plan mode by @jerop in
+  [#17593](https://github.com/google-gemini/gemini-cli/pull/17593)
+- feat(ui): add solid background color option for input prompt by @jacob314 in
+  [#16563](https://github.com/google-gemini/gemini-cli/pull/16563)
+- feat(plan): refresh system prompt when approval mode changes (Shift+Tab) by
+  @jerop in [#17585](https://github.com/google-gemini/gemini-cli/pull/17585)
+- feat(cli): add global setting to disable UI spinners by @galz10 in
+  [#17234](https://github.com/google-gemini/gemini-cli/pull/17234)
+- fix(security): enforce strict policy directory permissions by @yunaseoul in
+  [#17353](https://github.com/google-gemini/gemini-cli/pull/17353)
+- test(core): fix tests in windows by @scidomino in
+  [#17592](https://github.com/google-gemini/gemini-cli/pull/17592)
+- feat(mcp/extensions): Allow users to selectively enable/disable MCP servers
+  included in an extension( Issue #11057 & #17402) by @jasmeetsb in
+  [#17434](https://github.com/google-gemini/gemini-cli/pull/17434)
+- Always map mac keys, even on other platforms by @scidomino in
+  [#17618](https://github.com/google-gemini/gemini-cli/pull/17618)
+- Ctrl-O by @jacob314 in
+  [#17617](https://github.com/google-gemini/gemini-cli/pull/17617)
+- feat(plan): update cycling order of approval modes by @Adib234 in
+  [#17622](https://github.com/google-gemini/gemini-cli/pull/17622)
+- fix(cli): restore 'Modify with editor' option in external terminals by
+  @abhipatel12 in
+  [#17621](https://github.com/google-gemini/gemini-cli/pull/17621)
+- Slash command for helping in debugging by @gundermanc in
+  [#17609](https://github.com/google-gemini/gemini-cli/pull/17609)
+- feat: add double-click to expand/collapse large paste placeholders by
+  @jackwotherspoon in
+  [#17471](https://github.com/google-gemini/gemini-cli/pull/17471)
+- refactor(cli): migrate non-interactive flow to event-driven scheduler by
+  @abhipatel12 in
+  [#17572](https://github.com/google-gemini/gemini-cli/pull/17572)
+- fix: loadcodeassist eligible tiers getting ignored for unlicensed users
+  (regression) by @gsquared94 in
+  [#17581](https://github.com/google-gemini/gemini-cli/pull/17581)
+- chore(core): delete legacy nonInteractiveToolExecutor by @abhipatel12 in
+  [#17573](https://github.com/google-gemini/gemini-cli/pull/17573)
+- feat(core): enforce server prefixes for MCP tools in agent definitions by
+  @abhipatel12 in
+  [#17574](https://github.com/google-gemini/gemini-cli/pull/17574)
+- feat (mcp): Refresh MCP prompts on list changed notification by @MrLesk in
+  [#14863](https://github.com/google-gemini/gemini-cli/pull/14863)
+- feat(ui): pretty JSON rendering tool outputs by @medic-code in
+  [#9767](https://github.com/google-gemini/gemini-cli/pull/9767)
+- Fix iterm alternate buffer mode issue rendering backgrounds by @jacob314 in
+  [#17634](https://github.com/google-gemini/gemini-cli/pull/17634)
+- feat(cli): add gemini extensions list --output-format=json by @AkihiroSuda in
+  [#14479](https://github.com/google-gemini/gemini-cli/pull/14479)
+- fix(extensions): add .gitignore to extension templates by @godwiniheuwa in
+  [#17293](https://github.com/google-gemini/gemini-cli/pull/17293)
+- paste transform followup by @jacob314 in
+  [#17624](https://github.com/google-gemini/gemini-cli/pull/17624)
+- refactor: rename formatMemoryUsage to formatBytes by @Nubebuster in
+  [#14997](https://github.com/google-gemini/gemini-cli/pull/14997)
+- chore: remove extra top margin from /hooks and /extensions by @jackwotherspoon
+  in [#17663](https://github.com/google-gemini/gemini-cli/pull/17663)
+- feat(cli): add oncall command for issue triage by @sehoon38 in
+  [#17661](https://github.com/google-gemini/gemini-cli/pull/17661)
+- Fix sidebar issue for extensions link by @chrstnb in
+  [#17668](https://github.com/google-gemini/gemini-cli/pull/17668)
+- Change formatting to prevent UI redressing attacks by @scidomino in
+  [#17611](https://github.com/google-gemini/gemini-cli/pull/17611)
+- Fix cluster of bugs in the settings dialog. by @jacob314 in
+  [#17628](https://github.com/google-gemini/gemini-cli/pull/17628)
+- Update sidebar to resolve site build issues by @chrstnb in
+  [#17674](https://github.com/google-gemini/gemini-cli/pull/17674)
+- fix(admin): fix a few bugs related to admin controls by @skeshive in
+  [#17590](https://github.com/google-gemini/gemini-cli/pull/17590)
+- revert bad changes to tests by @scidomino in
+  [#17673](https://github.com/google-gemini/gemini-cli/pull/17673)
+- feat(cli): show candidate issue state reason and duplicate status in triage by
+  @sehoon38 in [#17676](https://github.com/google-gemini/gemini-cli/pull/17676)
+- Fix missing slash commands when Gemini CLI is in a project with a package.json
+  that doesn't follow semantic versioning by @Adib234 in
+  [#17561](https://github.com/google-gemini/gemini-cli/pull/17561)
+- feat(core): Model family-specific system prompts by @joshualitt in
+  [#17614](https://github.com/google-gemini/gemini-cli/pull/17614)
+- Sub-agents documentation. by @gundermanc in
+  [#16639](https://github.com/google-gemini/gemini-cli/pull/16639)
+- feat: wire up AskUserTool with dialog by @jackwotherspoon in
+  [#17411](https://github.com/google-gemini/gemini-cli/pull/17411)
+- Load extension settings for hooks, agents, skills by @chrstnb in
+  [#17245](https://github.com/google-gemini/gemini-cli/pull/17245)
+- Fix issue where Gemini CLI can make changes when simply asked a question by
+  @gundermanc in
+  [#17608](https://github.com/google-gemini/gemini-cli/pull/17608)
+- Update docs-writer skill for editing and add style guide for reference. by
+  @g-samroberts in
+  [#17669](https://github.com/google-gemini/gemini-cli/pull/17669)
+- fix(ux): have user message display a short path for pasted images by @devr0306
+  in [#17613](https://github.com/google-gemini/gemini-cli/pull/17613)
+- feat(plan): enable AskUser tool in Plan mode for clarifying questions by
+  @jerop in [#17694](https://github.com/google-gemini/gemini-cli/pull/17694)
+- GEMINI.md polish by @jacob314 in
+  [#17680](https://github.com/google-gemini/gemini-cli/pull/17680)
+- refactor(core): centralize path validation and allow temp dir access for tools
+  by @NTaylorMullen in
+  [#17185](https://github.com/google-gemini/gemini-cli/pull/17185)
+- feat(skills): promote Agent Skills to stable by @abhipatel12 in
+  [#17693](https://github.com/google-gemini/gemini-cli/pull/17693)
+- refactor(cli): keyboard handling and AskUserDialog by @jacob314 in
+  [#17414](https://github.com/google-gemini/gemini-cli/pull/17414)
+- docs: Add Experimental Remote Agent Docs by @adamfweidman in
+  [#17697](https://github.com/google-gemini/gemini-cli/pull/17697)
+- revert: promote Agent Skills to stable (#17693) by @abhipatel12 in
+  [#17712](https://github.com/google-gemini/gemini-cli/pull/17712)
+- feat(ux) Expandable (ctrl-O) and scrollable approvals in alternate buffer
+  mode. by @jacob314 in
+  [#17640](https://github.com/google-gemini/gemini-cli/pull/17640)
+- feat(skills): promote skills settings to stable by @abhipatel12 in
+  [#17713](https://github.com/google-gemini/gemini-cli/pull/17713)
+- fix(cli): Preserve settings dialog focus when searching by @SandyTao520 in
+  [#17701](https://github.com/google-gemini/gemini-cli/pull/17701)
+- feat(ui): add terminal cursor support by @jacob314 in
+  [#17711](https://github.com/google-gemini/gemini-cli/pull/17711)
+- docs(skills): remove experimental labels and update tutorials by @abhipatel12
+  in [#17714](https://github.com/google-gemini/gemini-cli/pull/17714)
+- docs: remove 'experimental' syntax for hooks in docs by @abhipatel12 in
+  [#17660](https://github.com/google-gemini/gemini-cli/pull/17660)
+- Add support for an additional exclusion file besides .gitignore and
+  .geminiignore by @alisa-alisa in
+  [#16487](https://github.com/google-gemini/gemini-cli/pull/16487)
+- feat: add review-frontend-and-fix command by @galz10 in
+  [#17707](https://github.com/google-gemini/gemini-cli/pull/17707)
 
 **Full changelog**:
-https://github.com/google-gemini/gemini-cli/compare/v0.25.0-preview.4...v0.26.0-preview.0
+https://github.com/google-gemini/gemini-cli/compare/v0.26.0-preview.5...v0.27.0-preview.0

docs/cli/cli-reference.md

@@ -0,0 +1,119 @@
+# CLI cheatsheet
+
+This page provides a reference for commonly used Gemini CLI commands, options,
+and parameters.
+
+## CLI commands
+
+| Command                            | Description                        | Example                                             |
+| ---------------------------------- | ---------------------------------- | --------------------------------------------------- |
+| `gemini`                           | Start interactive REPL             | `gemini`                                            |
+| `gemini "query"`                   | Query non-interactively, then exit | `gemini "explain this project"`                     |
+| `gemini -p "query"`                | Query via SDK, then exit           | `gemini -p "explain this function"`                 |
+| `cat file \| gemini -p "query"`    | Process piped content              | `cat logs.txt \| gemini -p "explain"`               |
+| `gemini -i "query"`                | Execute and continue interactively | `gemini -i "What is the purpose of this project?"`  |
+| `gemini -r "latest"`               | Continue most recent session       | `gemini -r "latest"`                                |
+| `gemini -r "latest" "query"`       | Continue session with a new prompt | `gemini -r "latest" "Check for type errors"`        |
+| `gemini -r "<session-id>" "query"` | Resume session by ID               | `gemini -r "abc123" "Finish this PR"`               |
+| `gemini update`                    | Update to latest version           | `gemini update`                                     |
+| `gemini extensions`                | Manage extensions                  | See [Extensions Management](#extensions-management) |
+| `gemini mcp`                       | Configure MCP servers              | See [MCP Server Management](#mcp-server-management) |
+
+### Positional arguments
+
+| Argument | Type              | Description                                                                                                        |
+| -------- | ----------------- | ------------------------------------------------------------------------------------------------------------------ |
+| `query`  | string (variadic) | Positional prompt. Defaults to one-shot mode. Use `-i/--prompt-interactive` to execute and continue interactively. |
+
+## CLI Options
+
+| Option                           | Alias | Type    | Default   | Description                                                                                                |
+| -------------------------------- | ----- | ------- | --------- | ---------------------------------------------------------------------------------------------------------- |
+| `--debug`                        | `-d`  | boolean | `false`   | Run in debug mode with verbose logging                                                                     |
+| `--version`                      | `-v`  | -       | -         | Show CLI version number and exit                                                                           |
+| `--help`                         | `-h`  | -       | -         | Show help information                                                                                      |
+| `--model`                        | `-m`  | string  | `auto`    | Model to use. See [Model Selection](#model-selection) for available values.                                |
+| `--prompt`                       | `-p`  | string  | -         | Prompt text. Appended to stdin input if provided. **Deprecated:** Use positional arguments instead.        |
+| `--prompt-interactive`           | `-i`  | string  | -         | Execute prompt and continue in interactive mode                                                            |
+| `--ralph-wiggum`                 | -     | boolean | `false`   | Enable Ralph Wiggum iterative loop mode                                                                    |
+| `--completion-promise`           | -     | string  | -         | String to look for to signal completion in Ralph Wiggum mode                                               |
+| `--max-iterations`               | -     | number  | `10`      | Maximum loop iterations for Ralph Wiggum mode                                                              |
+| `--sandbox`                      | `-s`  | boolean | `false`   | Run in a sandboxed environment for safer execution                                                         |
+| `--approval-mode`                | -     | string  | `default` | Approval mode for tool execution. Choices: `default`, `auto_edit`, `yolo`                                  |
+| `--yolo`                         | `-y`  | boolean | `false`   | **Deprecated.** Auto-approve all actions. Use `--approval-mode=yolo` instead.                              |
+| `--experimental-acp`             | -     | boolean | -         | Start in ACP (Agent Code Pilot) mode. **Experimental feature.**                                            |
+| `--experimental-zed-integration` | -     | boolean | -         | Run in Zed editor integration mode. **Experimental feature.**                                              |
+| `--allowed-mcp-server-names`     | -     | array   | -         | Allowed MCP server names (comma-separated or multiple flags)                                               |
+| `--allowed-tools`                | -     | array   | -         | Tools that are allowed to run without confirmation (comma-separated or multiple flags)                     |
+| `--extensions`                   | `-e`  | array   | -         | List of extensions to use. If not provided, all extensions are enabled (comma-separated or multiple flags) |
+| `--list-extensions`              | `-l`  | boolean | -         | List all available extensions and exit                                                                     |
+| `--resume`                       | `-r`  | string  | -         | Resume a previous session. Use `"latest"` for most recent or index number (e.g. `--resume 5`)              |
+| `--list-sessions`                | -     | boolean | -         | List available sessions for the current project and exit                                                   |
+| `--delete-session`               | -     | string  | -         | Delete a session by index number (use `--list-sessions` to see available sessions)                         |
+| `--include-directories`          | -     | array   | -         | Additional directories to include in the workspace (comma-separated or multiple flags)                     |
+| `--screen-reader`                | -     | boolean | -         | Enable screen reader mode for accessibility                                                                |
+| `--output-format`                | `-o`  | string  | `text`    | The format of the CLI output. Choices: `text`, `json`, `stream-json`                                       |
+
+## Model selection
+
+The `--model` (or `-m`) flag allows you to specify which Gemini model to use.
+You can use either model aliases (user-friendly names) or concrete model names.
+
+### Model aliases
+
+These are convenient shortcuts that map to specific models:
+
+| Alias        | Resolves To                                | Description                                                                                                               |
+| ------------ | ------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------- |
+| `auto`       | `gemini-2.5-pro` or `gemini-3-pro-preview` | **Default.** Resolves to the preview model if preview features are enabled, otherwise resolves to the standard pro model. |
+| `pro`        | `gemini-2.5-pro` or `gemini-3-pro-preview` | For complex reasoning tasks. Uses preview model if enabled.                                                               |
+| `flash`      | `gemini-2.5-flash`                         | Fast, balanced model for most tasks.                                                                                      |
+| `flash-lite` | `gemini-2.5-flash-lite`                    | Fastest model for simple tasks.                                                                                           |
+
+## Extensions management
+
+| Command                                            | Description                                  | Example                                                                        |
+| -------------------------------------------------- | -------------------------------------------- | ------------------------------------------------------------------------------ |
+| `gemini extensions install <source>`               | Install extension from Git URL or local path | `gemini extensions install https://github.com/user/my-extension`               |
+| `gemini extensions install <source> --ref <ref>`   | Install from specific branch/tag/commit      | `gemini extensions install https://github.com/user/my-extension --ref develop` |
+| `gemini extensions install <source> --auto-update` | Install with auto-update enabled             | `gemini extensions install https://github.com/user/my-extension --auto-update` |
+| `gemini extensions uninstall <name>`               | Uninstall one or more extensions             | `gemini extensions uninstall my-extension`                                     |
+| `gemini extensions list`                           | List all installed extensions                | `gemini extensions list`                                                       |
+| `gemini extensions update <name>`                  | Update a specific extension                  | `gemini extensions update my-extension`                                        |
+| `gemini extensions update --all`                   | Update all extensions                        | `gemini extensions update --all`                                               |
+| `gemini extensions enable <name>`                  | Enable an extension                          | `gemini extensions enable my-extension`                                        |
+| `gemini extensions disable <name>`                 | Disable an extension                         | `gemini extensions disable my-extension`                                       |
+| `gemini extensions link <path>`                    | Link local extension for development         | `gemini extensions link /path/to/extension`                                    |
+| `gemini extensions new <path>`                     | Create new extension from template           | `gemini extensions new ./my-extension`                                         |
+| `gemini extensions validate <path>`                | Validate extension structure                 | `gemini extensions validate ./my-extension`                                    |
+
+See [Extensions Documentation](../extensions/index.md) for more details.
+
+## MCP server management
+
+| Command                                                       | Description                     | Example                                                                                              |
+| ------------------------------------------------------------- | ------------------------------- | ---------------------------------------------------------------------------------------------------- |
+| `gemini mcp add <name> <command>`                             | Add stdio-based MCP server      | `gemini mcp add github npx -y @modelcontextprotocol/server-github`                                   |
+| `gemini mcp add <name> <url> --transport http`                | Add HTTP-based MCP server       | `gemini mcp add api-server http://localhost:3000 --transport http`                                   |
+| `gemini mcp add <name> <command> --env KEY=value`             | Add with environment variables  | `gemini mcp add slack node server.js --env SLACK_TOKEN=xoxb-xxx`                                     |
+| `gemini mcp add <name> <command> --scope user`                | Add with user scope             | `gemini mcp add db node db-server.js --scope user`                                                   |
+| `gemini mcp add <name> <command> --include-tools tool1,tool2` | Add with specific tools         | `gemini mcp add github npx -y @modelcontextprotocol/server-github --include-tools list_repos,get_pr` |
+| `gemini mcp remove <name>`                                    | Remove an MCP server            | `gemini mcp remove github`                                                                           |
+| `gemini mcp list`                                             | List all configured MCP servers | `gemini mcp list`                                                                                    |
+
+See [MCP Server Integration](../tools/mcp-server.md) for more details.
+
+## Skills management
+
+| Command                          | Description                           | Example                                           |
+| -------------------------------- | ------------------------------------- | ------------------------------------------------- |
+| `gemini skills list`             | List all discovered agent skills      | `gemini skills list`                              |
+| `gemini skills install <source>` | Install skill from Git, path, or file | `gemini skills install https://github.com/u/repo` |
+| `gemini skills link <path>`      | Link local agent skills via symlink   | `gemini skills link /path/to/my-skills`           |
+| `gemini skills uninstall <name>` | Uninstall an agent skill              | `gemini skills uninstall my-skill`                |
+| `gemini skills enable <name>`    | Enable an agent skill                 | `gemini skills enable my-skill`                   |
+| `gemini skills disable <name>`   | Disable an agent skill                | `gemini skills disable my-skill`                  |
+| `gemini skills enable --all`     | Enable all skills                     | `gemini skills enable --all`                      |
+| `gemini skills disable --all`    | Disable all skills                    | `gemini skills disable --all`                     |
+
+See [Agent Skills Documentation](./skills.md) for more details.

docs/cli/commands.md

@@ -10,6 +10,14 @@ Slash commands provide meta-level control over the CLI itself.
 
 ### Built-in Commands
 
+- **`/about`**
+  - **Description:** Show version info. Please share this information when
+    filing issues.
+
+- **`/auth`**
+  - **Description:** Open a dialog that lets you change the authentication
+    method.
+
 - **`/bug`**
   - **Description:** File an issue about Gemini CLI. By default, the issue is
     filed within the GitHub repository for Gemini CLI. The string you enter
@@ -22,10 +30,21 @@ Slash commands provide meta-level control over the CLI itself.
     conversation state interactively, or resuming a previous state from a later
     session.
   - **Sub-commands:**
-    - **`save`**
+    - **`delete <tag>`**
+      - **Description:** Deletes a saved conversation checkpoint.
+    - **`list`**
+      - **Description:** Lists available tags for chat state resumption.
+      - **Note:** This command only lists chats saved within the current
+        project. Because chat history is project-scoped, chats saved in other
+        project directories will not be displayed.
+    - **`resume <tag>`**
+      - **Description:** Resumes a conversation from a previous save.
+      - **Note:** You can only resume chats that were saved within the current
+        project. To resume a chat from a different project, you must run the
+        Gemini CLI from that project's directory.
+    - **`save <tag>`**
       - **Description:** Saves the current conversation history. You must add a
         `<tag>` for identifying the conversation state.
-      - **Usage:** `/chat save <tag>`
       - **Details on checkpoint location:** The default locations for saved chat
         checkpoints are:
         - Linux/macOS: `~/.gemini/tmp/<project_hash>/`
@@ -37,25 +56,11 @@ Slash commands provide meta-level control over the CLI itself.
           conversation states. For automatic checkpoints created before file
           modifications, see the
           [Checkpointing documentation](../cli/checkpointing.md).
-    - **`resume`**
-      - **Description:** Resumes a conversation from a previous save.
-      - **Usage:** `/chat resume <tag>`
-      - **Note:** You can only resume chats that were saved within the current
-        project. To resume a chat from a different project, you must run the
-        Gemini CLI from that project's directory.
-    - **`list`**
-      - **Description:** Lists available tags for chat state resumption.
-      - **Note:** This command only lists chats saved within the current
-        project. Because chat history is project-scoped, chats saved in other
-        project directories will not be displayed.
-    - **`delete`**
-      - **Description:** Deletes a saved conversation checkpoint.
-      - **Usage:** `/chat delete <tag>`
-    - **`share`**
+    - **`share [filename]`**
       - **Description** Writes the current conversation to a provided Markdown
-        or JSON file.
-      - **Usage** `/chat share file.md` or `/chat share file.json`. If no
-        filename is provided, then the CLI will generate one.
+        or JSON file. If no filename is provided, then the CLI will generate
+        one.
+      - **Usage** `/chat share file.md` or `/chat share file.json`.
 
 - **`/clear`**
   - **Description:** Clear the terminal screen, including the visible session
@@ -98,6 +103,9 @@ Slash commands provide meta-level control over the CLI itself.
         `--include-directories`.
       - **Usage:** `/directory show`
 
+- **`/docs`**
+  - **Description:** Open the Gemini CLI documentation in your browser.
+
 - **`/editor`**
   - **Description:** Open a dialog for selecting supported editors.
 
@@ -109,30 +117,65 @@ Slash commands provide meta-level control over the CLI itself.
   - **Description:** Display help information about Gemini CLI, including
     available commands and their usage.
 
+- **`/hooks`**
+  - **Description:** Manage hooks, which allow you to intercept and customize
+    Gemini CLI behavior at specific lifecycle events.
+  - **Sub-commands:**
+    - **`disable-all`**:
+      - **Description:** Disable all enabled hooks.
+    - **`disable <hook-name>`**:
+      - **Description:** Disable a hook by name.
+    - **`enable-all`**:
+      - **Description:** Enable all disabled hooks.
+    - **`enable <hook-name>`**:
+      - **Description:** Enable a hook by name.
+    - **`list`** (or `show`, `panel`):
+      - **Description:** Display all registered hooks with their status.
+
+- **`/ide`**
+  - **Description:** Manage IDE integration.
+  - **Sub-commands:**
+    - **`disable`**:
+      - **Description:** Disable IDE integration.
+    - **`enable`**:
+      - **Description:** Enable IDE integration.
+    - **`install`**:
+      - **Description:** Install required IDE companion.
+    - **`status`**:
+      - **Description:** Check status of IDE integration.
+
+- **`/init`**
+  - **Description:** To help users easily create a `GEMINI.md` file, this
+    command analyzes the current directory and generates a tailored context
+    file, making it simpler for them to provide project-specific instructions to
+    the Gemini agent.
+
+- **`/introspect`**
+  - **Description:** Provide debugging information about the current Gemini CLI
+    session, including the state of loaded sub-agents and active hooks. This
+    command is primarily for advanced users and developers.
+
 - **`/mcp`**
   - **Description:** Manage configured Model Context Protocol (MCP) servers.
   - **Sub-commands:**
-    - **`list`** or **`ls`**:
-      - **Description:** List configured MCP servers and tools. This is the
-        default action if no subcommand is specified.
-    - **`desc`**
-      - **Description:** List configured MCP servers and tools with
-        descriptions.
-    - **`schema`**:
-      - **Description:** List configured MCP servers and tools with descriptions
-        and schemas.
     - **`auth`**:
       - **Description:** Authenticate with an OAuth-enabled MCP server.
       - **Usage:** `/mcp auth <server-name>`
       - **Details:** If `<server-name>` is provided, it initiates the OAuth flow
         for that server. If no server name is provided, it lists all configured
         servers that support OAuth authentication.
+    - **`desc`**
+      - **Description:** List configured MCP servers and tools with
+        descriptions.
+    - **`list`** or **`ls`**:
+      - **Description:** List configured MCP servers and tools. This is the
+        default action if no subcommand is specified.
     - **`refresh`**:
       - **Description:** Restarts all MCP servers and re-discovers their
         available tools.
-
-- [**`/model`**](./model.md)
-  - **Description:** Opens a dialog to choose your Gemini model.
+    - **`schema`**:
+      - **Description:** List configured MCP servers and tools with descriptions
+        and schemas.
 
 - **`/memory`**
   - **Description:** Manage the AI's instructional context (hierarchical memory
@@ -141,23 +184,40 @@ Slash commands provide meta-level control over the CLI itself.
     - **`add`**:
       - **Description:** Adds the following text to the AI's memory. Usage:
         `/memory add <text to remember>`
-    - **`show`**:
-      - **Description:** Display the full, concatenated content of the current
-        hierarchical memory that has been loaded from all `GEMINI.md` files.
-        This lets you inspect the instructional context being provided to the
-        Gemini model.
+    - **`list`**:
+      - **Description:** Lists the paths of the GEMINI.md files in use for
+        hierarchical memory.
     - **`refresh`**:
       - **Description:** Reload the hierarchical instructional memory from all
         `GEMINI.md` files found in the configured locations (global,
         project/ancestors, and sub-directories). This command updates the model
         with the latest `GEMINI.md` content.
-    - **`list`**:
-      - **Description:** Lists the paths of the GEMINI.md files in use for
-        hierarchical memory.
+    - **`show`**:
+      - **Description:** Display the full, concatenated content of the current
+        hierarchical memory that has been loaded from all `GEMINI.md` files.
+        This lets you inspect the instructional context being provided to the
+        Gemini model.
     - **Note:** For more details on how `GEMINI.md` files contribute to
       hierarchical memory, see the
       [CLI Configuration documentation](../get-started/configuration.md).
 
+- [**`/model`**](./model.md)
+  - **Description:** Opens a dialog to choose your Gemini model.
+
+- **`/policies`**
+  - **Description:** Manage policies.
+  - **Sub-commands:**
+    - **`list`**:
+      - **Description:** List all active policies grouped by mode.
+
+- **`/privacy`**
+  - **Description:** Display the Privacy Notice and allow users to select
+    whether they consent to the collection of their data for service improvement
+    purposes.
+
+- **`/quit`** (or **`/exit`**)
+  - **Description:** Exit Gemini CLI.
+
 - **`/restore`**
   - **Description:** Restores the project files to the state they were in just
     before a tool was executed. This is particularly useful for undoing file
@@ -168,18 +228,24 @@ Slash commands provide meta-level control over the CLI itself.
     [settings](../get-started/configuration.md). See
     [Checkpointing documentation](../cli/checkpointing.md) for more details.
 
+- [**`/rewind`**](./rewind.md)
+  - **Description:** Navigates backward through the conversation history,
+    allowing you to review past interactions and potentially revert to a
+    previous state. This feature helps in managing complex or branched
+    conversations.
+
 - **`/resume`**
   - **Description:** Browse and resume previous conversation sessions. Opens an
     interactive session browser where you can search, filter, and select from
     automatically saved conversations.
   - **Features:**
-    - **Session Browser:** Interactive interface showing all saved sessions with
-      timestamps, message counts, and first user message for context
-    - **Search:** Use `/` to search through conversation content across all
-      sessions
-    - **Sorting:** Sort sessions by date or message count
     - **Management:** Delete unwanted sessions directly from the browser
     - **Resume:** Select any session to resume and continue the conversation
+    - **Search:** Use `/` to search through conversation content across all
+      sessions
+    - **Session Browser:** Interactive interface showing all saved sessions with
+      timestamps, message counts, and first user message for context
+    - **Sorting:** Sort sessions by date or message count
   - **Note:** All conversations are automatically saved as you chat - no manual
     saving required. See [Session Management](../cli/session-management.md) for
     complete details.
@@ -198,19 +264,26 @@ Slash commands provide meta-level control over the CLI itself.
     modify them as desired. Changes to some settings are applied immediately,
     while others require a restart.
 
+- **`/shells`** (or **`/bashes`**)
+  - **Description:** Toggle the background shells view. This allows you to view
+    and manage long-running processes that you've sent to the background.
+- **`/setup-github`**
+  - **Description:** Set up GitHub Actions to triage issues and review PRs with
+    Gemini.
+
 - [**`/skills`**](./skills.md)
-  - **Description:** (Experimental) Manage Agent Skills, which provide on-demand
-    expertise and specialized workflows.
+  - **Description:** Manage Agent Skills, which provide on-demand expertise and
+    specialized workflows.
   - **Sub-commands:**
+    - **`disable <name>`**:
+      - **Description:** Disable a specific skill by name.
+      - **Usage:** `/skills disable <name>`
+    - **`enable <name>`**:
+      - **Description:** Enable a specific skill by name.
+      - **Usage:** `/skills enable <name>`
     - **`list`**:
       - **Description:** List all discovered skills and their current status
         (enabled/disabled).
-    - **`enable`**:
-      - **Description:** Enable a specific skill by name.
-      - **Usage:** `/skills enable <name>`
-    - **`disable`**:
-      - **Description:** Disable a specific skill by name.
-      - **Usage:** `/skills disable <name>`
     - **`reload`**:
       - **Description:** Refresh the list of discovered skills from all tiers
         (workspace, user, and extensions).
@@ -222,18 +295,14 @@ Slash commands provide meta-level control over the CLI itself.
     cached tokens are being used, which occurs with API key authentication but
     not with OAuth authentication at this time.
 
+- **`/terminal-setup`**
+  - **Description:** Configure terminal keybindings for multiline input (VS
+    Code, Cursor, Windsurf).
+
 - [**`/theme`**](./themes.md)
   - **Description:** Open a dialog that lets you change the visual theme of
     Gemini CLI.
 
-- **`/auth`**
-  - **Description:** Open a dialog that lets you change the authentication
-    method.
-
-- **`/about`**
-  - **Description:** Show version info. Please share this information when
-    filing issues.
-
 - [**`/tools`**](../tools/index.md)
   - **Description:** Display a list of tools that are currently available within
     Gemini CLI.
@@ -245,37 +314,23 @@ Slash commands provide meta-level control over the CLI itself.
     - **`nodesc`** or **`nodescriptions`**:
       - **Description:** Hide tool descriptions, showing only the tool names.
 
-- **`/privacy`**
-  - **Description:** Display the Privacy Notice and allow users to select
-    whether they consent to the collection of their data for service improvement
-    purposes.
-
-- **`/quit`** (or **`/exit`**)
-  - **Description:** Exit Gemini CLI.
-
 - **`/vim`**
   - **Description:** Toggle vim mode on or off. When vim mode is enabled, the
     input area supports vim-style navigation and editing commands in both NORMAL
     and INSERT modes.
   - **Features:**
+    - **Count support:** Prefix commands with numbers (e.g., `3h`, `5w`, `10G`)
+    - **Editing commands:** Delete with `x`, change with `c`, insert with `i`,
+      `a`, `o`, `O`; complex operations like `dd`, `cc`, `dw`, `cw`
+    - **INSERT mode:** Standard text input with escape to return to NORMAL mode
     - **NORMAL mode:** Navigate with `h`, `j`, `k`, `l`; jump by words with `w`,
       `b`, `e`; go to line start/end with `0`, `$`, `^`; go to specific lines
       with `G` (or `gg` for first line)
-    - **INSERT mode:** Standard text input with escape to return to NORMAL mode
-    - **Editing commands:** Delete with `x`, change with `c`, insert with `i`,
-      `a`, `o`, `O`; complex operations like `dd`, `cc`, `dw`, `cw`
-    - **Count support:** Prefix commands with numbers (e.g., `3h`, `5w`, `10G`)
-    - **Repeat last command:** Use `.` to repeat the last editing operation
     - **Persistent setting:** Vim mode preference is saved to
       `~/.gemini/settings.json` and restored between sessions
-  - **Status indicator:** When enabled, shows `[NORMAL]` or `[INSERT]` in the
-    footer
-
-- **`/init`**
-  - **Description:** To help users easily create a `GEMINI.md` file, this
-    command analyzes the current directory and generates a tailored context
-    file, making it simpler for them to provide project-specific instructions to
-    the Gemini agent.
+    - **Repeat last command:** Use `.` to repeat the last editing operation
+    - **Status indicator:** When enabled, shows `[NORMAL]` or `[INSERT]` in the
+      footer
 
 ### Custom commands
 
@@ -288,12 +343,12 @@ please see the dedicated [Custom Commands documentation](./custom-commands.md).
 These shortcuts apply directly to the input prompt for text manipulation.
 
 - **Undo:**
-  - **Keyboard shortcut:** Press **Ctrl+z** to undo the last action in the input
-    prompt.
+  - **Keyboard shortcut:** Press **Cmd+z** or **Alt+z** to undo the last action
+    in the input prompt.
 
 - **Redo:**
-  - **Keyboard shortcut:** Press **Ctrl+Shift+Z** to redo the last undone action
-    in the input prompt.
+  - **Keyboard shortcut:** Press **Shift+Cmd+Z** or **Shift+Alt+Z** to redo the
+    last undone action in the input prompt.
 
 ## At commands (`@`)
 

docs/cli/creating-skills.md

@@ -0,0 +1,80 @@
+# Creating Agent Skills
+
+This guide provides an overview of how to create your own Agent Skills to extend
+the capabilities of Gemini CLI.
+
+## Getting started: The `skill-creator` skill
+
+The recommended way to create a new skill is to use the built-in `skill-creator`
+skill. To use it, ask Gemini CLI to create a new skill for you.
+
+**Example prompt:**
+
+> "create a new skill called 'code-reviewer'"
+
+Gemini CLI will then use the `skill-creator` to generate the skill:
+
+1.  Generate a new directory for your skill (e.g., `my-new-skill/`).
+2.  Create a `SKILL.md` file with the necessary YAML frontmatter (`name` and
+    `description`).
+3.  Create the standard resource directories: `scripts/`, `references/`, and
+    `assets/`.
+
+## Manual skill creation
+
+If you prefer to create skills manually:
+
+1.  **Create a directory** for your skill (e.g., `my-new-skill/`).
+2.  **Create a `SKILL.md` file** inside the new directory.
+
+To add additional resources that support the skill, refer to the skill
+structure.
+
+## Skill structure
+
+A skill is a directory containing a `SKILL.md` file at its root.
+
+### Folder structure
+
+While a `SKILL.md` file is the only required component, we recommend the
+following structure for organizing your skill's resources:
+
+```text
+my-skill/
+├── SKILL.md       (Required) Instructions and metadata
+├── scripts/       (Optional) Executable scripts
+├── references/    (Optional) Static documentation
+└── assets/        (Optional) Templates and other resources
+```
+
+### `SKILL.md` file
+
+The `SKILL.md` file is the core of your skill. This file uses YAML frontmatter
+for metadata and Markdown for instructions. For example:
+
+```markdown
+---
+name: code-reviewer
+description:
+  Use this skill to review code. It supports both local changes and remote Pull
+  Requests.
+---
+
+# Code Reviewer
+
+This skill guides the agent in conducting thorough code reviews.
+
+## Workflow
+
+### 1. Determine Review Target
+
+- **Remote PR**: If the user gives a PR number or URL, target that remote PR.
+- **Local Changes**: If changes are local... ...
+```
+
+- **`name`**: A unique identifier for the skill. This should match the directory
+  name.
+- **`description`**: A description of what the skill does and when Gemini should
+  use it.
+- **Body**: The Markdown body of the file contains the instructions that guide
+  the agent's behavior when the skill is active.

docs/cli/enterprise.md

@@ -203,6 +203,23 @@ with the actual Gemini CLI process, which inherits the environment variable.
 This makes it significantly more difficult for a user to bypass the enforced
 settings.
 
+## User isolation in shared environments
+
+In shared compute environments (like ML experiment runners or shared build
+servers), you can isolate Gemini CLI state by overriding the user's home
+directory.
+
+By default, Gemini CLI stores configuration and history in `~/.gemini`. You can
+use the `GEMINI_CLI_HOME` environment variable to point to a unique directory
+for a specific user or job. The CLI will create a `.gemini` folder inside the
+specified path.
+
+```bash
+# Isolate state for a specific job
+export GEMINI_CLI_HOME="/tmp/gemini-job-123"
+gemini
+```
+
 ## Restricting tool access
 
 You can significantly enhance security by controlling which tools the Gemini

docs/cli/index.md

@@ -29,8 +29,8 @@ overview of Gemini CLI, see the [main documentation page](../index.md).
   in an enterprise environment.
 - **[Sandboxing](./sandbox.md):** Isolate tool execution in a secure,
   containerized environment.
-- **[Agent Skills](./skills.md):** (Experimental) Extend the CLI with
-  specialized expertise and procedural workflows.
+- **[Agent Skills](./skills.md):** Extend the CLI with specialized expertise and
+  procedural workflows.
 - **[Telemetry](./telemetry.md):** Configure observability to monitor usage and
   performance.
 - **[Token caching](./token-caching.md):** Optimize API costs by caching tokens.

docs/cli/keyboard-shortcuts.md

@@ -23,24 +23,24 @@ available combinations.
 | Move the cursor to the end of the line.     | `Ctrl + E`<br />`End (no Shift, Ctrl)`                       |
 | Move the cursor up one line.                | `Up Arrow (no Shift, Alt, Ctrl, Cmd)`                        |
 | Move the cursor down one line.              | `Down Arrow (no Shift, Alt, Ctrl, Cmd)`                      |
-| Move the cursor one character to the left.  | `Left Arrow (no Shift, Alt, Ctrl, Cmd)`<br />`Ctrl + B`      |
+| Move the cursor one character to the left.  | `Left Arrow (no Shift, Alt, Ctrl, Cmd)`                      |
 | Move the cursor one character to the right. | `Right Arrow (no Shift, Alt, Ctrl, Cmd)`<br />`Ctrl + F`     |
 | Move the cursor one word to the left.       | `Ctrl + Left Arrow`<br />`Alt + Left Arrow`<br />`Alt + B`   |
 | Move the cursor one word to the right.      | `Ctrl + Right Arrow`<br />`Alt + Right Arrow`<br />`Alt + F` |
 
 #### Editing
 
-| Action                                           | Keys                                                      |
-| ------------------------------------------------ | --------------------------------------------------------- |
-| Delete from the cursor to the end of the line.   | `Ctrl + K`                                                |
-| Delete from the cursor to the start of the line. | `Ctrl + U`                                                |
-| Clear all text in the input field.               | `Ctrl + C`                                                |
-| Delete the previous word.                        | `Ctrl + Backspace`<br />`Alt + Backspace`<br />`Ctrl + W` |
-| Delete the next word.                            | `Ctrl + Delete`<br />`Alt + Delete`                       |
-| Delete the character to the left.                | `Backspace`<br />`Ctrl + H`                               |
-| Delete the character to the right.               | `Delete`<br />`Ctrl + D`                                  |
-| Undo the most recent text edit.                  | `Ctrl + Z (no Shift)`                                     |
-| Redo the most recent undone text edit.           | `Shift + Ctrl + Z`                                        |
+| Action                                           | Keys                                                             |
+| ------------------------------------------------ | ---------------------------------------------------------------- |
+| Delete from the cursor to the end of the line.   | `Ctrl + K`                                                       |
+| Delete from the cursor to the start of the line. | `Ctrl + U`                                                       |
+| Clear all text in the input field.               | `Ctrl + C`                                                       |
+| Delete the previous word.                        | `Ctrl + Backspace`<br />`Alt + Backspace`<br />`Ctrl + W`        |
+| Delete the next word.                            | `Ctrl + Delete`<br />`Alt + Delete`                              |
+| Delete the character to the left.                | `Backspace`<br />`Ctrl + H`                                      |
+| Delete the character to the right.               | `Delete`<br />`Ctrl + D`                                         |
+| Undo the most recent text edit.                  | `Cmd + Z (no Shift)`<br />`Alt + Z (no Shift)`                   |
+| Redo the most recent undone text edit.           | `Shift + Ctrl + Z`<br />`Shift + Cmd + Z`<br />`Shift + Alt + Z` |
 
 #### Scrolling
 
@@ -66,12 +66,14 @@ available combinations.
 
 #### Navigation
 
-| Action                           | Keys                                        |
-| -------------------------------- | ------------------------------------------- |
-| Move selection up in lists.      | `Up Arrow (no Shift)`                       |
-| Move selection down in lists.    | `Down Arrow (no Shift)`                     |
-| Move up within dialog options.   | `Up Arrow (no Shift)`<br />`K (no Shift)`   |
-| Move down within dialog options. | `Down Arrow (no Shift)`<br />`J (no Shift)` |
+| Action                                             | Keys                                        |
+| -------------------------------------------------- | ------------------------------------------- |
+| Move selection up in lists.                        | `Up Arrow (no Shift)`                       |
+| Move selection down in lists.                      | `Down Arrow (no Shift)`                     |
+| Move up within dialog options.                     | `Up Arrow (no Shift)`<br />`K (no Shift)`   |
+| Move down within dialog options.                   | `Down Arrow (no Shift)`<br />`J (no Shift)` |
+| Move to the next item or question in a dialog.     | `Tab (no Shift)`                            |
+| Move to the previous item or question in a dialog. | `Shift + Tab`                               |
 
 #### Suggestions & Completions
 
@@ -94,20 +96,29 @@ available combinations.
 
 #### App Controls
 
-| Action                                                                                                | Keys             |
-| ----------------------------------------------------------------------------------------------------- | ---------------- |
-| Toggle detailed error information.                                                                    | `F12`            |
-| Toggle the full TODO list.                                                                            | `Ctrl + T`       |
-| Show IDE context details.                                                                             | `Ctrl + G`       |
-| Toggle Markdown rendering.                                                                            | `Alt + M`        |
-| Toggle copy mode when in alternate buffer mode.                                                       | `Ctrl + S`       |
-| Toggle YOLO (auto-approval) mode for tool calls.                                                      | `Ctrl + Y`       |
-| Cycle through approval modes: default (prompt), auto_edit (auto-approve edits), and plan (read-only). | `Shift + Tab`    |
-| Expand a height-constrained response to show additional lines when not in alternate buffer mode.      | `Ctrl + S`       |
-| Focus the shell input from the gemini input.                                                          | `Tab (no Shift)` |
-| Focus the Gemini input from the shell input.                                                          | `Tab`            |
-| Clear the terminal screen and redraw the UI.                                                          | `Ctrl + L`       |
-| Restart the application.                                                                              | `R`              |
+| Action                                                                                                | Keys                       |
+| ----------------------------------------------------------------------------------------------------- | -------------------------- |
+| Toggle detailed error information.                                                                    | `F12`                      |
+| Toggle the full TODO list.                                                                            | `Ctrl + T`                 |
+| Show IDE context details.                                                                             | `Ctrl + G`                 |
+| Toggle Markdown rendering.                                                                            | `Alt + M`                  |
+| Toggle copy mode when in alternate buffer mode.                                                       | `Ctrl + S`                 |
+| Toggle YOLO (auto-approval) mode for tool calls.                                                      | `Ctrl + Y`                 |
+| Cycle through approval modes: default (prompt), auto_edit (auto-approve edits), and plan (read-only). | `Shift + Tab`              |
+| Expand a height-constrained response to show additional lines when not in alternate buffer mode.      | `Ctrl + O`<br />`Ctrl + S` |
+| Ctrl+B                                                                                                | `Ctrl + B`                 |
+| Ctrl+L                                                                                                | `Ctrl + L`                 |
+| Ctrl+K                                                                                                | `Ctrl + K`                 |
+| Enter                                                                                                 | `Enter`                    |
+| Esc                                                                                                   | `Esc`                      |
+| Shift+Tab                                                                                             | `Shift + Tab`              |
+| Tab                                                                                                   | `Tab (no Shift)`           |
+| Tab                                                                                                   | `Tab (no Shift)`           |
+| Focus the shell input from the gemini input.                                                          | `Tab (no Shift)`           |
+| Focus the Gemini input from the shell input.                                                          | `Tab`                      |
+| Clear the terminal screen and redraw the UI.                                                          | `Ctrl + L`                 |
+| Restart the application.                                                                              | `R`                        |
+| Suspend the application (not yet implemented).                                                        | `Ctrl + Z`                 |
 
 <!-- KEYBINDINGS-AUTOGEN:END -->
 
@@ -124,3 +135,6 @@ available combinations.
   single-line input, navigate backward or forward through prompt history.
 - `Number keys (1-9, multi-digit)` inside selection dialogs: Jump directly to
   the numbered radio option and confirm when the full number is entered.
+- `Double-click` on a paste placeholder (`[Pasted Text: X lines]`) in alternate
+  buffer mode: Expand to view full content inline. Double-click again to
+  collapse.

docs/cli/rewind.md

@@ -0,0 +1,51 @@
+# Rewind
+
+The `/rewind` command allows you to go back to a previous state in your
+conversation and, optionally, revert any file changes made by the AI during
+those interactions. This is a powerful tool for undoing mistakes, exploring
+different approaches, or simply cleaning up your session history.
+
+## Usage
+
+To use the rewind feature, simply type `/rewind` into the input prompt and press
+**Enter**.
+
+Alternatively, you can use the keyboard shortcut: **Press `Esc` twice**.
+
+## Interface
+
+When you trigger a rewind, an interactive list of your previous interactions
+appears.
+
+1.  **Select Interaction:** Use the **Up/Down arrow keys** to navigate through
+    the list. The most recent interactions are at the bottom.
+2.  **Preview:** As you select an interaction, you'll see a preview of the user
+    prompt and, if applicable, the number of files changed during that step.
+3.  **Confirm Selection:** Press **Enter** on the interaction you want to rewind
+    back to.
+4.  **Action Selection:** After selecting an interaction, you'll be presented
+    with a confirmation dialog with up to three options:
+    - **Rewind conversation and revert code changes:** Reverts both the chat
+      history and the file modifications to the state before the selected
+      interaction.
+    - **Rewind conversation:** Only reverts the chat history. File changes are
+      kept.
+    - **Revert code changes:** Only reverts the file modifications. The chat
+      history is kept.
+    - **Do nothing (esc):** Cancels the rewind operation.
+
+If no code changes were made since the selected point, the options related to
+reverting code changes will be hidden.
+
+## Key Considerations
+
+- **Destructive Action:** Rewinding is a destructive action for your current
+  session history and potentially your files. Use it with care.
+- **Agent Awareness:** When you rewind the conversation, the AI model loses all
+  memory of the interactions that were removed. If you only revert code changes,
+  you may need to inform the model that the files have changed.
+- **Manual Edits:** Rewinding only affects file changes made by the AI's edit
+  tools. It does **not** undo manual edits you've made or changes triggered by
+  the shell tool (`!`).
+- **Compression:** Rewind works across chat compression points by reconstructing
+  the history from stored session data.

docs/cli/settings.md

@@ -39,29 +39,33 @@ they appear in the UI.
 
 ### UI
 
-| UI Label                       | Setting                                 | Description                                                                                                                                                       | Default |
-| ------------------------------ | --------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
-| Hide Window Title              | `ui.hideWindowTitle`                    | Hide the window title bar                                                                                                                                         | `false` |
-| Show Thoughts in Title         | `ui.showStatusInTitle`                  | Show Gemini CLI model thoughts in the terminal window title during the working phase                                                                              | `false` |
-| Dynamic Window Title           | `ui.dynamicWindowTitle`                 | Update the terminal window title with current status icons (Ready: ◇, Action Required: ✋, Working: ✦)                                                            | `true`  |
-| Show Home Directory Warning    | `ui.showHomeDirectoryWarning`           | Show a warning when running Gemini CLI in the home directory.                                                                                                     | `true`  |
-| Hide Tips                      | `ui.hideTips`                           | Hide helpful tips in the UI                                                                                                                                       | `false` |
-| Hide Banner                    | `ui.hideBanner`                         | Hide the application banner                                                                                                                                       | `false` |
-| Hide Context Summary           | `ui.hideContextSummary`                 | Hide the context summary (GEMINI.md, MCP servers) above the input.                                                                                                | `false` |
-| Hide CWD                       | `ui.footer.hideCWD`                     | Hide the current working directory path in the footer.                                                                                                            | `false` |
-| Hide Sandbox Status            | `ui.footer.hideSandboxStatus`           | Hide the sandbox status indicator in the footer.                                                                                                                  | `false` |
-| Hide Model Info                | `ui.footer.hideModelInfo`               | Hide the model name and context usage in the footer.                                                                                                              | `false` |
-| Hide Context Window Percentage | `ui.footer.hideContextPercentage`       | Hides the context window remaining percentage.                                                                                                                    | `true`  |
-| Hide Footer                    | `ui.hideFooter`                         | Hide the footer from the UI                                                                                                                                       | `false` |
-| Show Memory Usage              | `ui.showMemoryUsage`                    | Display memory usage information in the UI                                                                                                                        | `false` |
-| Show Line Numbers              | `ui.showLineNumbers`                    | Show line numbers in the chat.                                                                                                                                    | `true`  |
-| Show Citations                 | `ui.showCitations`                      | Show citations for generated text in the chat.                                                                                                                    | `false` |
-| Show Model Info In Chat        | `ui.showModelInfoInChat`                | Show the model name in the chat for each model turn.                                                                                                              | `false` |
-| Use Full Width                 | `ui.useFullWidth`                       | Use the entire width of the terminal for output.                                                                                                                  | `true`  |
-| Use Alternate Screen Buffer    | `ui.useAlternateBuffer`                 | Use an alternate screen buffer for the UI, preserving shell history.                                                                                              | `false` |
-| Incremental Rendering          | `ui.incrementalRendering`               | Enable incremental rendering for the UI. This option will reduce flickering but may cause rendering artifacts. Only supported when useAlternateBuffer is enabled. | `true`  |
-| Enable Loading Phrases         | `ui.accessibility.enableLoadingPhrases` | Enable loading phrases during operations.                                                                                                                         | `true`  |
-| Screen Reader Mode             | `ui.accessibility.screenReader`         | Render output in plain-text to be more screen reader accessible                                                                                                   | `false` |
+| UI Label                             | Setting                                 | Description                                                                                                                                                       | Default |
+| ------------------------------------ | --------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
+| Auto Theme Switching                 | `ui.autoThemeSwitching`                 | Automatically switch between default light and dark themes based on terminal background color.                                                                    | `true`  |
+| Terminal Background Polling Interval | `ui.terminalBackgroundPollingInterval`  | Interval in seconds to poll the terminal background color.                                                                                                        | `60`    |
+| Hide Window Title                    | `ui.hideWindowTitle`                    | Hide the window title bar                                                                                                                                         | `false` |
+| Show Thoughts in Title               | `ui.showStatusInTitle`                  | Show Gemini CLI model thoughts in the terminal window title during the working phase                                                                              | `false` |
+| Dynamic Window Title                 | `ui.dynamicWindowTitle`                 | Update the terminal window title with current status icons (Ready: ◇, Action Required: ✋, Working: ✦)                                                            | `true`  |
+| Show Home Directory Warning          | `ui.showHomeDirectoryWarning`           | Show a warning when running Gemini CLI in the home directory.                                                                                                     | `true`  |
+| Hide Tips                            | `ui.hideTips`                           | Hide helpful tips in the UI                                                                                                                                       | `false` |
+| Hide Banner                          | `ui.hideBanner`                         | Hide the application banner                                                                                                                                       | `false` |
+| Hide Context Summary                 | `ui.hideContextSummary`                 | Hide the context summary (GEMINI.md, MCP servers) above the input.                                                                                                | `false` |
+| Hide CWD                             | `ui.footer.hideCWD`                     | Hide the current working directory path in the footer.                                                                                                            | `false` |
+| Hide Sandbox Status                  | `ui.footer.hideSandboxStatus`           | Hide the sandbox status indicator in the footer.                                                                                                                  | `false` |
+| Hide Model Info                      | `ui.footer.hideModelInfo`               | Hide the model name and context usage in the footer.                                                                                                              | `false` |
+| Hide Context Window Percentage       | `ui.footer.hideContextPercentage`       | Hides the context window remaining percentage.                                                                                                                    | `true`  |
+| Hide Footer                          | `ui.hideFooter`                         | Hide the footer from the UI                                                                                                                                       | `false` |
+| Show Memory Usage                    | `ui.showMemoryUsage`                    | Display memory usage information in the UI                                                                                                                        | `false` |
+| Show Line Numbers                    | `ui.showLineNumbers`                    | Show line numbers in the chat.                                                                                                                                    | `true`  |
+| Show Citations                       | `ui.showCitations`                      | Show citations for generated text in the chat.                                                                                                                    | `false` |
+| Show Model Info In Chat              | `ui.showModelInfoInChat`                | Show the model name in the chat for each model turn.                                                                                                              | `false` |
+| Show User Identity                   | `ui.showUserIdentity`                   | Show the logged-in user's identity (e.g. email) in the UI.                                                                                                        | `true`  |
+| Use Alternate Screen Buffer          | `ui.useAlternateBuffer`                 | Use an alternate screen buffer for the UI, preserving shell history.                                                                                              | `false` |
+| Use Background Color                 | `ui.useBackgroundColor`                 | Whether to use background colors in the UI.                                                                                                                       | `true`  |
+| Incremental Rendering                | `ui.incrementalRendering`               | Enable incremental rendering for the UI. This option will reduce flickering but may cause rendering artifacts. Only supported when useAlternateBuffer is enabled. | `true`  |
+| Show Spinner                         | `ui.showSpinner`                        | Show the spinner during operations.                                                                                                                               | `true`  |
+| Enable Loading Phrases               | `ui.accessibility.enableLoadingPhrases` | Enable loading phrases during operations.                                                                                                                         | `true`  |
+| Screen Reader Mode                   | `ui.accessibility.screenReader`         | Render output in plain-text to be more screen reader accessible                                                                                                   | `false` |
 
 ### IDE
 
@@ -75,54 +79,63 @@ they appear in the UI.
 | ----------------------- | ---------------------------- | -------------------------------------------------------------------------------------- | ------- |
 | Max Session Turns       | `model.maxSessionTurns`      | Maximum number of user/model/tool turns to keep in a session. -1 means unlimited.      | `-1`    |
 | Compression Threshold   | `model.compressionThreshold` | The fraction of context usage at which to trigger context compression (e.g. 0.2, 0.3). | `0.5`   |
+| Disable Loop Detection  | `model.disableLoopDetection` | Disable automatic detection and prevention of infinite loops.                          | `false` |
 | Skip Next Speaker Check | `model.skipNextSpeakerCheck` | Skip the next speaker check.                                                           | `true`  |
 
 ### Context
 
-| UI Label                             | Setting                                           | Description                                                                                                                                     | Default |
-| ------------------------------------ | ------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
-| Memory Discovery Max Dirs            | `context.discoveryMaxDirs`                        | Maximum number of directories to search for memory.                                                                                             | `200`   |
-| Load Memory From Include Directories | `context.loadMemoryFromIncludeDirectories`        | Controls how /memory refresh loads GEMINI.md files. When true, include directories are scanned; when false, only the current directory is used. | `false` |
-| Respect .gitignore                   | `context.fileFiltering.respectGitIgnore`          | Respect .gitignore files when searching.                                                                                                        | `true`  |
-| Respect .geminiignore                | `context.fileFiltering.respectGeminiIgnore`       | Respect .geminiignore files when searching.                                                                                                     | `true`  |
-| Enable Recursive File Search         | `context.fileFiltering.enableRecursiveFileSearch` | Enable recursive file search functionality when completing @ references in the prompt.                                                          | `true`  |
-| Enable Fuzzy Search                  | `context.fileFiltering.enableFuzzySearch`         | Enable fuzzy search when searching for files.                                                                                                   | `true`  |
+| UI Label                             | Setting                                           | Description                                                                                                                                                                                                                                 | Default |
+| ------------------------------------ | ------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
+| Memory Discovery Max Dirs            | `context.discoveryMaxDirs`                        | Maximum number of directories to search for memory.                                                                                                                                                                                         | `200`   |
+| Load Memory From Include Directories | `context.loadMemoryFromIncludeDirectories`        | Controls how /memory refresh loads GEMINI.md files. When true, include directories are scanned; when false, only the current directory is used.                                                                                             | `false` |
+| Respect .gitignore                   | `context.fileFiltering.respectGitIgnore`          | Respect .gitignore files when searching.                                                                                                                                                                                                    | `true`  |
+| Respect .geminiignore                | `context.fileFiltering.respectGeminiIgnore`       | Respect .geminiignore files when searching.                                                                                                                                                                                                 | `true`  |
+| Enable Recursive File Search         | `context.fileFiltering.enableRecursiveFileSearch` | Enable recursive file search functionality when completing @ references in the prompt.                                                                                                                                                      | `true`  |
+| Enable Fuzzy Search                  | `context.fileFiltering.enableFuzzySearch`         | Enable fuzzy search when searching for files.                                                                                                                                                                                               | `true`  |
+| Custom Ignore File Paths             | `context.fileFiltering.customIgnoreFilePaths`     | Additional ignore file paths to respect. These files take precedence over .geminiignore and .gitignore. Files earlier in the array take precedence over files later in the array, e.g. the first file takes precedence over the second one. | `[]`    |
 
 ### Tools
 
-| UI Label                         | Setting                              | Description                                                                                                                                                                | Default   |
-| -------------------------------- | ------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------- |
-| Enable Interactive Shell         | `tools.shell.enableInteractiveShell` | Use node-pty for an interactive shell experience. Fallback to child_process still applies.                                                                                 | `true`    |
-| Show Color                       | `tools.shell.showColor`              | Show color in shell output.                                                                                                                                                | `false`   |
-| Auto Accept                      | `tools.autoAccept`                   | Automatically accept and execute tool calls that are considered safe (e.g., read-only operations).                                                                         | `false`   |
-| Use Ripgrep                      | `tools.useRipgrep`                   | Use ripgrep for file content search instead of the fallback implementation. Provides faster search performance.                                                            | `true`    |
-| Enable Tool Output Truncation    | `tools.enableToolOutputTruncation`   | Enable truncation of large tool outputs.                                                                                                                                   | `true`    |
-| Tool Output Truncation Threshold | `tools.truncateToolOutputThreshold`  | Truncate tool output if it is larger than this many characters. Set to -1 to disable.                                                                                      | `4000000` |
-| Tool Output Truncation Lines     | `tools.truncateToolOutputLines`      | The number of lines to keep when truncating tool output.                                                                                                                   | `1000`    |
-| Disable LLM Correction           | `tools.disableLLMCorrection`         | Disable LLM-based error correction for edit tools. When enabled, tools will fail immediately if exact string matches are not found, instead of attempting to self-correct. | `true`    |
+| UI Label                         | Setting                              | Description                                                                                                                                                                    | Default     |
+| -------------------------------- | ------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ----------- |
+| Enable Interactive Shell         | `tools.shell.enableInteractiveShell` | Use node-pty for an interactive shell experience. Fallback to child_process still applies.                                                                                     | `true`      |
+| Show Color                       | `tools.shell.showColor`              | Show color in shell output.                                                                                                                                                    | `false`     |
+| Approval Mode                    | `tools.approvalMode`                 | The default approval mode for tool execution. 'default' prompts for approval, 'auto_edit' auto-approves edit tools, and 'plan' is read-only mode. 'yolo' is not supported yet. | `"default"` |
+| Use Ripgrep                      | `tools.useRipgrep`                   | Use ripgrep for file content search instead of the fallback implementation. Provides faster search performance.                                                                | `true`      |
+| Enable Tool Output Truncation    | `tools.enableToolOutputTruncation`   | Enable truncation of large tool outputs.                                                                                                                                       | `true`      |
+| Tool Output Truncation Threshold | `tools.truncateToolOutputThreshold`  | Truncate tool output if it is larger than this many characters. Set to -1 to disable.                                                                                          | `4000000`   |
+| Tool Output Truncation Lines     | `tools.truncateToolOutputLines`      | The number of lines to keep when truncating tool output.                                                                                                                       | `1000`      |
+| Disable LLM Correction           | `tools.disableLLMCorrection`         | Disable LLM-based error correction for edit tools. When enabled, tools will fail immediately if exact string matches are not found, instead of attempting to self-correct.     | `true`      |
 
 ### Security
 
-| UI Label                              | Setting                                         | Description                                                                     | Default |
-| ------------------------------------- | ----------------------------------------------- | ------------------------------------------------------------------------------- | ------- |
-| Disable YOLO Mode                     | `security.disableYoloMode`                      | Disable YOLO mode, even if enabled by a flag.                                   | `false` |
-| Allow Permanent Tool Approval         | `security.enablePermanentToolApproval`          | Enable the "Allow for all future sessions" option in tool confirmation dialogs. | `false` |
-| Blocks extensions from Git            | `security.blockGitExtensions`                   | Blocks installing and loading extensions from Git.                              | `false` |
-| Folder Trust                          | `security.folderTrust.enabled`                  | Setting to track whether Folder trust is enabled.                               | `false` |
-| Enable Environment Variable Redaction | `security.environmentVariableRedaction.enabled` | Enable redaction of environment variables that may contain secrets.             | `false` |
+| UI Label                              | Setting                                         | Description                                                                                                                                                             | Default |
+| ------------------------------------- | ----------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
+| Disable YOLO Mode                     | `security.disableYoloMode`                      | Disable YOLO mode, even if enabled by a flag.                                                                                                                           | `false` |
+| Allow Permanent Tool Approval         | `security.enablePermanentToolApproval`          | Enable the "Allow for all future sessions" option in tool confirmation dialogs.                                                                                         | `false` |
+| Blocks extensions from Git            | `security.blockGitExtensions`                   | Blocks installing and loading extensions from Git.                                                                                                                      | `false` |
+| Extension Source Regex Allowlist      | `security.allowedExtensions`                    | List of Regex patterns for allowed extensions. If nonempty, only extensions that match the patterns in this list are allowed. Overrides the blockGitExtensions setting. | `[]`    |
+| Folder Trust                          | `security.folderTrust.enabled`                  | Setting to track whether Folder trust is enabled.                                                                                                                       | `true`  |
+| Enable Environment Variable Redaction | `security.environmentVariableRedaction.enabled` | Enable redaction of environment variables that may contain secrets.                                                                                                     | `false` |
 
 ### Experimental
 
 | UI Label         | Setting                      | Description                                                                         | Default |
 | ---------------- | ---------------------------- | ----------------------------------------------------------------------------------- | ------- |
-| Agent Skills     | `experimental.skills`        | Enable Agent Skills (experimental).                                                 | `false` |
 | Use OSC 52 Paste | `experimental.useOSC52Paste` | Use OSC 52 sequence for pasting instead of clipboardy (useful for remote sessions). | `false` |
 | Plan             | `experimental.plan`          | Enable planning features (Plan Mode and tools).                                     | `false` |
 
+### Skills
+
+| UI Label            | Setting          | Description          | Default |
+| ------------------- | ---------------- | -------------------- | ------- |
+| Enable Agent Skills | `skills.enabled` | Enable Agent Skills. | `true`  |
+
 ### HooksConfig
 
-| UI Label           | Setting                     | Description                                      | Default |
-| ------------------ | --------------------------- | ------------------------------------------------ | ------- |
-| Hook Notifications | `hooksConfig.notifications` | Show visual indicators when hooks are executing. | `true`  |
+| UI Label           | Setting                     | Description                                                                      | Default |
+| ------------------ | --------------------------- | -------------------------------------------------------------------------------- | ------- |
+| Enable Hooks       | `hooksConfig.enabled`       | Canonical toggle for the hooks system. When disabled, no hooks will be executed. | `true`  |
+| Hook Notifications | `hooksConfig.notifications` | Show visual indicators when hooks are executing.                                 | `true`  |
 
 <!-- SETTINGS-AUTOGEN:END -->

docs/cli/skills.md

@@ -1,9 +1,5 @@
 # Agent Skills
 
-_Note: This is an experimental feature enabled via `experimental.skills`. You
-can also search for "Skills" within the `/settings` interactive UI to toggle
-this and manage other skill-related settings._
-
 Agent Skills allow you to extend Gemini CLI with specialized expertise,
 procedural workflows, and task-specific resources. Based on the
 [Agent Skills](https://agentskills.io) open standard, a "skill" is a
@@ -56,6 +52,7 @@ locations override lower ones: **Workspace > User > Extension**.
 Use the `/skills` slash command to view and manage available expertise:
 
 - `/skills list` (default): Shows all discovered skills and their status.
+- `/skills link <path>`: Links agent skills from a local directory via symlink.
 - `/skills disable <name>`: Prevents a specific skill from being used.
 - `/skills enable <name>`: Re-enables a disabled skill.
 - `/skills reload`: Refreshes the list of discovered skills from all tiers.
@@ -71,6 +68,13 @@ The `gemini skills` command provides management utilities:
 # List all discovered skills
 gemini skills list
 
+# Link agent skills from a local directory via symlink
+# Discovers skills (SKILL.md or */SKILL.md) and creates symlinks in ~/.gemini/skills (user)
+gemini skills link /path/to/my-skills-repo
+
+# Link to the workspace scope (.gemini/skills)
+gemini skills link /path/to/my-skills-repo --scope workspace
+
 # Install a skill from a Git repository, local directory, or zipped skill file (.skill)
 # Uses the user scope by default (~/.gemini/skills)
 gemini skills install https://github.com/user/repo.git
@@ -93,84 +97,7 @@ gemini skills enable my-expertise
 gemini skills disable my-expertise --scope workspace
 ```
 
-## Creating a Skill
-
-A skill is a directory containing a `SKILL.md` file at its root. This file uses
-YAML frontmatter for metadata and Markdown for instructions.
-
-### Folder Structure
-
-Skills are self-contained directories. At a minimum, a skill requires a
-`SKILL.md` file, but can include other resources:
-
-```text
-my-skill/
-├── SKILL.md       (Required) Instructions and metadata
-├── scripts/       (Optional) Executable scripts/tools
-├── references/    (Optional) Static documentation and examples
-└── assets/        (Optional) Templates and binary resources
-```
-
-### Basic Structure (SKILL.md)
-
-```markdown
----
-name: <unique-name>
-description: <what the skill does and when Gemini should use it>
----
-
-<your instructions for how the agent should behave / use the skill>
-```
-
-- **`name`**: A unique identifier (lowercase, alphanumeric, and dashes).
-- **`description`**: The most critical field. Gemini uses this to decide when
-  the skill is relevant. Be specific about the expertise provided.
-- **Body**: Everything below the second `---` is injected as expert procedural
-  guidance for the model.
-
-### Example: Team Code Reviewer
-
-Create `~/.gemini/skills/code-reviewer/SKILL.md`:
-
-```markdown
----
-name: code-reviewer
-description:
-  Expertise in reviewing code for style, security, and performance. Use when the
-  user asks for "feedback," a "review," or to "check" their changes.
----
-
-# Code Reviewer
-
-You are an expert code reviewer. When reviewing code, follow this workflow:
-
-1.  **Analyze**: Review the staged changes or specific files provided. Ensure
-    that the changes are scoped properly and represent minimal changes required
-    to address the issue.
-2.  **Style**: Ensure code follows the workspace's conventions and idiomatic
-    patterns as described in the `GEMINI.md` file.
-3.  **Security**: Flag any potential security vulnerabilities.
-4.  **Tests**: Verify that new logic has corresponding test coverage and that
-    the test coverage adequately validates the changes.
-
-Provide your feedback as a concise bulleted list of "Strengths" and
-"Opportunities."
-```
-
-### Resource Conventions
-
-While you can structure your skill directory however you like, the Agent Skills
-standard encourages these conventions:
-
-- **`scripts/`**: Executable scripts (bash, python, node) the agent can run.
-- **`references/`**: Static documentation, schemas, or example data for the
-  agent to consult.
-- **`assets/`**: Code templates, boilerplate, or binary resources.
-
-When a skill is activated, Gemini CLI provides the model with a tree view of the
-entire skill directory, allowing it to discover and utilize these assets.
-
-## How it Works (Security & Privacy)
+## How it Works
 
 1.  **Discovery**: At the start of a session, Gemini CLI scans the discovery
     tiers and injects the name and description of all enabled skills into the
@@ -186,3 +113,15 @@ entire skill directory, allowing it to discover and utilize these assets.
       it permission to read any bundled assets.
 5.  **Execution**: The model proceeds with the specialized expertise active. It
     is instructed to prioritize the skill's procedural guidance within reason.
+
+### Skill activation
+
+Once a skill is activated (typically by Gemini identifying a task that matches
+the skill's description and your approval), its specialized instructions and
+resources are loaded into the agent's context. A skill remains active and its
+guidance is prioritized for the duration of the session.
+
+## Creating your own skills
+
+To create your own skills, see the [Create Agent Skills](./creating-skills.md)
+guide.

docs/cli/tutorials/skills-getting-started.md

@@ -1,37 +1,10 @@
 # Getting Started with Agent Skills
 
 Agent Skills allow you to extend Gemini CLI with specialized expertise. This
-tutorial will guide you through creating your first skill, enabling it, and
-using it in a session.
+tutorial will guide you through creating your first skill and using it in a
+session.
 
-## 1. Enable Agent Skills
-
-Agent Skills are currently an experimental feature and must be enabled in your
-settings.
-
-### Via the interactive UI
-
-1.  Start a Gemini CLI session by running `gemini`.
-2.  Type `/settings` to open the interactive settings dialog.
-3.  Search for "Skills".
-4.  Toggle **Agent Skills** to `true`.
-5.  Press `Esc` to save and exit. You may need to restart the CLI for the
-    changes to take effect.
-
-### Via `settings.json`
-
-Alternatively, you can manually edit your global settings file at
-`~/.gemini/settings.json` (create it if it doesn't exist):
-
-```json
-{
-  "experimental": {
-    "skills": true
-  }
-}
-```
-
-## 2. Create Your First Skill
+## 1. Create your first skill
 
 A skill is a directory containing a `SKILL.md` file. Let's create an **API
 Auditor** skill that helps you verify if local or remote endpoints are
@@ -86,7 +59,7 @@ responding correctly.
       .catch((e) => console.error(`Result: Failed (${e.message})`));
     ```
 
-## 3. Verify the Skill is Discovered
+## 2. Verify the skill is discovered
 
 Use the `/skills` slash command (or `gemini skills list` from your terminal) to
 see if Gemini CLI has found your new skill.
@@ -99,7 +72,7 @@ In a Gemini CLI session:
 
 You should see `api-auditor` in the list of available skills.
 
-## 4. Use the Skill in a Chat
+## 3. Use the skill in a chat
 
 Now, let's see the skill in action. Start a new session and ask a question about
 an endpoint.

docs/cli/uninstall.md

@@ -45,3 +45,21 @@ npm uninstall -g @google/gemini-cli
 ```
 
 This command completely removes the package from your system.
+
+## Method 3: Homebrew
+
+If you installed the CLI globally using Homebrew (e.g.,
+`brew install gemini-cli`), use the `brew uninstall` command to remove it.
+
+```bash
+brew uninstall gemini-cli
+```
+
+## Method 4: MacPorts
+
+If you installed the CLI globally using MacPorts (e.g.,
+`sudo port install gemini-cli`), use the `port uninstall` command to remove it.
+
+```bash
+sudo port uninstall gemini-cli
+```

docs/core/index.md

@@ -7,6 +7,8 @@ requests sent from `packages/cli`. For a general overview of Gemini CLI, see the
 
 ## Navigating this section
 
+- **[Sub-agents (experimental)](./subagents.md):** Learn how to create and use
+  specialized sub-agents for complex tasks.
 - **[Core tools API](./tools-api.md):** Information on how tools are defined,
   registered, and used by the core.
 - **[Memory Import Processor](./memport.md):** Documentation for the modular

docs/core/policy-engine.md

@@ -146,6 +146,38 @@ A rule matches a tool call if all of its conditions are met:
 Policies are defined in `.toml` files. The CLI loads these files from Default,
 User, and (if configured) Admin directories.
 
+### Policy locations
+
+| Tier      | Type   | Location                    |
+| :-------- | :----- | :-------------------------- |
+| **User**  | Custom | `~/.gemini/policies/*.toml` |
+| **Admin** | System | _See below (OS specific)_   |
+
+#### System-wide policies (Admin)
+
+Administrators can enforce system-wide policies (Tier 3) that override all user
+and default settings. These policies must be placed in specific, secure
+directories:
+
+| OS          | Policy Directory Path                             |
+| :---------- | :------------------------------------------------ |
+| **Linux**   | `/etc/gemini-cli/policies`                        |
+| **macOS**   | `/Library/Application Support/GeminiCli/policies` |
+| **Windows** | `C:\ProgramData\gemini-cli\policies`              |
+
+**Security Requirements:**
+
+To prevent privilege escalation, the CLI enforces strict security checks on
+admin directories. If checks fail, system policies are **ignored**.
+
+- **Linux / macOS:** Must be owned by `root` (UID 0) and NOT writable by group
+  or others (e.g., `chmod 755`).
+- **Windows:** Must be in `C:\ProgramData`. Standard users (`Users`, `Everyone`)
+  must NOT have `Write`, `Modify`, or `Full Control` permissions. _Tip: If you
+  see a security warning, use the folder properties to remove write permissions
+  for non-admin groups. You may need to "Disable inheritance" in Advanced
+  Security Settings._
+
 ### TOML rule schema
 
 Here is a breakdown of the fields available in a TOML policy rule:
@@ -178,6 +210,10 @@ decision = "ask_user"
 # The priority of the rule, from 0 to 999.
 priority = 10
 
+# (Optional) A custom message to display when a tool call is denied by this rule.
+# This message is returned to the model and user, useful for explaining *why* it was denied.
+deny_message = "Deletion is permanent"
+
 # (Optional) An array of approval modes where this rule is active.
 modes = ["autoEdit"]
 ```
@@ -250,6 +286,7 @@ only the `mcpName`.
 mcpName = "untrusted-server"
 decision = "deny"
 priority = 500
+deny_message = "This server is not trusted by the admin."
 ```
 
 ## Default policies
@@ -258,9 +295,9 @@ The Gemini CLI ships with a set of default policies to provide a safe
 out-of-the-box experience.
 
 - **Read-only tools** (like `read_file`, `glob`) are generally **allowed**.
-- **Agent delegation** (like `delegate_to_agent`) defaults to **`ask_user`** to
-  ensure remote agents can prompt for confirmation, but local sub-agent actions
-  are executed silently and checked individually.
+- **Agent delegation** defaults to **`ask_user`** to ensure remote agents can
+  prompt for confirmation, but local sub-agent actions are executed silently and
+  checked individually.
 - **Write tools** (like `write_file`, `run_shell_command`) default to
   **`ask_user`**.
 - In **`yolo`** mode, a high-priority rule allows all tools.

docs/core/remote-agents.md

@@ -0,0 +1,84 @@
+# Remote Subagents (experimental)
+
+Gemini CLI supports connecting to remote subagents using the Agent-to-Agent
+(A2A) protocol. This allows Gemini CLI to interact with other agents, expanding
+its capabilities by delegating tasks to remote services.
+
+Gemini CLI can connect to any compliant A2A agent. You can find samples of A2A
+agents in the following repositories:
+
+- [ADK Samples (Python)](https://github.com/google/adk-samples/tree/main/python)
+- [ADK Python Contributing Samples](https://github.com/google/adk-python/tree/main/contributing/samples)
+
+> **Note: Remote subagents are currently an experimental feature.**
+
+## Configuration
+
+To use remote subagents, you must explicitly enable them in your
+`settings.json`:
+
+```json
+{
+  "experimental": {
+    "enableAgents": true
+  }
+}
+```
+
+## Defining remote subagents
+
+Remote subagents are defined as Markdown files (`.md`) with YAML frontmatter.
+You can place them in:
+
+1.  **Project-level:** `.gemini/agents/*.md` (Shared with your team)
+2.  **User-level:** `~/.gemini/agents/*.md` (Personal agents)
+
+### Configuration schema
+
+| Field            | Type   | Required | Description                                                                                                    |
+| :--------------- | :----- | :------- | :------------------------------------------------------------------------------------------------------------- |
+| `kind`           | string | Yes      | Must be `remote`.                                                                                              |
+| `name`           | string | Yes      | A unique name for the agent. Must be a valid slug (lowercase letters, numbers, hyphens, and underscores only). |
+| `agent_card_url` | string | Yes      | The URL to the agent's A2A card endpoint.                                                                      |
+
+### Single-subagent example
+
+```markdown
+---
+kind: remote
+name: my-remote-agent
+agent_card_url: https://example.com/agent-card
+---
+```
+
+### Multi-subagent example
+
+The loader explicitly supports multiple remote subagents defined in a single
+Markdown file.
+
+```markdown
+---
+- kind: remote
+  name: remote-1
+  agent_card_url: https://example.com/1
+- kind: remote
+  name: remote-2
+  agent_card_url: https://example.com/2
+---
+```
+
+> **Note:** Mixed local and remote agents, or multiple local agents, are not
+> supported in a single file; the list format is currently remote-only.
+
+## Managing Subagents
+
+Users can manage subagents using the following commands within the Gemini CLI:
+
+- `/agents list`: Displays all available local and remote subagents.
+- `/agents refresh`: Reloads the agent registry. Use this after adding or
+  modifying agent definition files.
+- `/agents enable <agent_name>`: Enables a specific subagent.
+- `/agents disable <agent_name>`: Disables a specific subagent.
+
+> **Tip:** You can use the `@cli_help` agent within Gemini CLI for assistance
+> with configuring subagents.

docs/core/subagents.md

@@ -0,0 +1,191 @@
+# Sub-agents (experimental)
+
+Sub-agents are specialized agents that operate within your main Gemini CLI
+session. They are designed to handle specific, complex tasks—like deep codebase
+analysis, documentation lookup, or domain-specific reasoning—without cluttering
+the main agent's context or toolset.
+
+> **Note: Sub-agents are currently an experimental feature.**
+>
+> To use custom sub-agents, you must explicitly enable them in your
+> `settings.json`:
+>
+> ```json
+> {
+>   "experimental": { "enableAgents": true }
+> }
+> ```
+>
+> **Warning:** Sub-agents currently operate in
+> ["YOLO mode"](../get-started/configuration.md#command-line-arguments), meaning
+> they may execute tools without individual user confirmation for each step.
+> Proceed with caution when defining agents with powerful tools like
+> `run_shell_command` or `write_file`.
+
+## What are sub-agents?
+
+Sub-agents are "specialists" that the main Gemini agent can hire for a specific
+job.
+
+- **Focused context:** Each sub-agent has its own system prompt and persona.
+- **Specialized tools:** Sub-agents can have a restricted or specialized set of
+  tools.
+- **Independent context window:** Interactions with a sub-agent happen in a
+  separate context loop, which saves tokens in your main conversation history.
+
+Sub-agents are exposed to the main agent as a tool of the same name. When the
+main agent calls the tool, it delegates the task to the sub-agent. Once the
+sub-agent completes its task, it reports back to the main agent with its
+findings.
+
+## Built-in sub-agents
+
+Gemini CLI comes with the following built-in sub-agents:
+
+### Codebase Investigator
+
+- **Name:** `codebase_investigator`
+- **Purpose:** Analyze the codebase, reverse engineer, and understand complex
+  dependencies.
+- **When to use:** "How does the authentication system work?", "Map out the
+  dependencies of the `AgentRegistry` class."
+- **Configuration:** Enabled by default. You can configure it in
+  `settings.json`. Example (forcing a specific model):
+  ```json
+  {
+    "experimental": {
+      "codebaseInvestigatorSettings": {
+        "enabled": true,
+        "maxNumTurns": 20,
+        "model": "gemini-2.5-pro"
+      }
+    }
+  }
+  ```
+
+### CLI Help Agent
+
+- **Name:** `cli_help`
+- **Purpose:** Get expert knowledge about Gemini CLI itself, its commands,
+  configuration, and documentation.
+- **When to use:** "How do I configure a proxy?", "What does the `/rewind`
+  command do?"
+- **Configuration:** Enabled by default.
+
+### Generalist Agent
+
+- **Name:** `generalist_agent`
+- **Purpose:** Route tasks to the appropriate specialized sub-agent.
+- **When to use:** Implicitly used by the main agent for routing. Not directly
+  invoked by the user.
+- **Configuration:** Enabled by default. No specific configuration options.
+
+## Creating custom sub-agents
+
+You can create your own sub-agents to automate specific workflows or enforce
+specific personas. To use custom sub-agents, you must enable them in your
+`settings.json`:
+
+```json
+{
+  "experimental": {
+    "enableAgents": true
+  }
+}
+```
+
+### Agent definition files
+
+Custom agents are defined as Markdown files (`.md`) with YAML frontmatter. You
+can place them in:
+
+1.  **Project-level:** `.gemini/agents/*.md` (Shared with your team)
+2.  **User-level:** `~/.gemini/agents/*.md` (Personal agents)
+
+### File format
+
+The file **MUST** start with YAML frontmatter enclosed in triple-dashes `---`.
+The body of the markdown file becomes the agent's **System Prompt**.
+
+**Example: `.gemini/agents/security-auditor.md`**
+
+```markdown
+---
+name: security-auditor
+description: Specialized in finding security vulnerabilities in code.
+kind: local
+tools:
+  - read_file
+  - grep_search
+model: gemini-2.5-pro
+temperature: 0.2
+max_turns: 10
+---
+
+You are a ruthless Security Auditor. Your job is to analyze code for potential
+vulnerabilities.
+
+Focus on:
+
+1.  SQL Injection
+2.  XSS (Cross-Site Scripting)
+3.  Hardcoded credentials
+4.  Unsafe file operations
+
+When you find a vulnerability, explain it clearly and suggest a fix. Do not fix
+it yourself; just report it.
+```
+
+### Configuration schema
+
+| Field          | Type   | Required | Description                                                                                                                |
+| :------------- | :----- | :------- | :------------------------------------------------------------------------------------------------------------------------- |
+| `name`         | string | Yes      | Unique identifier (slug) used as the tool name for the agent. Only lowercase letters, numbers, hyphens, and underscores.   |
+| `description`  | string | Yes      | Short description of what the agent does. This is visible to the main agent to help it decide when to call this sub-agent. |
+| `kind`         | string | No       | `local` (default) or `remote`.                                                                                             |
+| `tools`        | array  | No       | List of tool names this agent can use. If omitted, it may have access to a default set.                                    |
+| `model`        | string | No       | Specific model to use (e.g., `gemini-2.5-pro`). Defaults to `inherit` (uses the main session model).                       |
+| `temperature`  | number | No       | Model temperature (0.0 - 2.0).                                                                                             |
+| `max_turns`    | number | No       | Maximum number of conversation turns allowed for this agent before it must return. Defaults to `15`.                       |
+| `timeout_mins` | number | No       | Maximum execution time in minutes. Defaults to `5`.                                                                        |
+
+### Optimizing your sub-agent
+
+The main agent's system prompt encourages it to use an expert sub-agent when one
+is available. It decides whether an agent is a relevant expert based on the
+agent's description. You can improve the reliability with which an agent is used
+by updating the description to more clearly indicate:
+
+- Its area of expertise.
+- When it should be used.
+- Some example scenarios.
+
+For example, the following sub-agent description should be called fairly
+consistently for Git operations.
+
+> Git expert agent which should be used for all local and remote git operations.
+> For example:
+>
+> - Making commits
+> - Searching for regressions with bisect
+> - Interacting with source control and issues providers such as GitHub.
+
+If you need to further tune your sub-agent, you can do so by selecting the model
+to optimize for with `/model` and then asking the model why it does not think
+that your sub-agent was called with a specific prompt and the given description.
+
+## Remote subagents (Agent2Agent) (experimental)
+
+Gemini CLI can also delegate tasks to remote sub-agents using the Agent-to-Agent
+(A2A) protocol.
+
+> **Note: Remote subagents are currently an experimental feature.**
+
+See the [Remote Subagents documentation](/docs/core/remote-agents) for detailed
+configuration and usage instructions.
+
+## Extension sub-agents
+
+Extensions can bundle and distribute sub-agents. See the
+[Extensions documentation](../extensions/index.md#sub-agents) for details on how
+to package agents within an extension.

docs/extensions/best-practices.md

@@ -0,0 +1,139 @@
+# Extensions on Gemini CLI: Best practices
+
+This guide covers best practices for developing, securing, and maintaining
+Gemini CLI extensions.
+
+## Development
+
+Developing extensions for Gemini CLI is intended to be a lightweight, iterative
+process.
+
+### Structure your extension
+
+While simple extensions can just be a few files, we recommend a robust structure
+for complex extensions:
+
+```
+my-extension/
+├── package.json
+├── tsconfig.json
+├── gemini-extension.json
+├── src/
+│   ├── index.ts
+│   └── tools/
+└── dist/
+```
+
+- **Use TypeScript**: We strongly recommend using TypeScript for type safety and
+  better tooling.
+- **Separate source and build**: Keep your source code in `src` and build to
+  `dist`.
+- **Bundle dependencies**: If your extension has many dependencies, consider
+  bundling them (e.g., with `esbuild` or `webpack`) to reduce install time and
+  potential conflicts.
+
+### Iterate with `link`
+
+Use `gemini extensions link` to develop locally without constantly reinstalling:
+
+```bash
+cd my-extension
+gemini extensions link .
+```
+
+Changes to your code (after rebuilding) will be immediately available in the CLI
+on restart.
+
+### Use `GEMINI.md` effectively
+
+Your `GEMINI.md` file provides context to the model. Keep it focused:
+
+- **Do:** Explain high-level goals and how to use the provided tools.
+- **Don't:** Dump your entire documentation.
+- **Do:** Use clear, concise language.
+
+## Security
+
+When building a Gemini CLI extension, follow general security best practices
+(such as least privilege and input validation) to reduce risk.
+
+### Minimal permissions
+
+When defining tools in your MCP server, only request the permissions necessary.
+Avoid giving the model broad access (like full shell access) if a more
+restricted set of tools will suffice.
+
+If you must use powerful tools like `run_shell_command`, consider restricting
+them to specific commands in your `gemini-extension.json`:
+
+```json
+{
+  "name": "my-safe-extension",
+  "excludeTools": ["run_shell_command(rm -rf *)"]
+}
+```
+
+This ensures that even if the model tries to execute a dangerous command, it
+will be blocked at the CLI level.
+
+### Validate inputs
+
+Your MCP server is running on the user's machine. Always validate inputs to your
+tools to prevent arbitrary code execution or filesystem access outside the
+intended scope.
+
+```typescript
+// Good: Validating paths
+if (!path.resolve(inputPath).startsWith(path.resolve(allowedDir) + path.sep)) {
+  throw new Error('Access denied');
+}
+```
+
+### Sensitive settings
+
+If your extension requires API keys, use the `sensitive: true` option in
+`gemini-extension.json`. This ensures keys are stored securely in the system
+keychain and obfuscated in the UI.
+
+```json
+"settings": [
+  {
+    "name": "API Key",
+    "envVar": "MY_API_KEY",
+    "sensitive": true
+  }
+]
+```
+
+## Releasing
+
+You can upload your extension directly to GitHub to list it in the gallery.
+Gemini CLI extensions also offers support for more complicated
+[releases](releasing.md).
+
+### Semantic versioning
+
+Follow [Semantic Versioning](https://semver.org/).
+
+- **Major**: Breaking changes (renaming tools, changing arguments).
+- **Minor**: New features (new tools, commands).
+- **Patch**: Bug fixes.
+
+### Release Channels
+
+Use git branches to manage release channels (e.g., `main` for stable, `dev` for
+bleeding edge). This allows users to choose their stability level:
+
+```bash
+# Stable
+gemini extensions install github.com/user/repo
+
+# Dev
+gemini extensions install github.com/user/repo --ref dev
+```
+
+### Clean artifacts
+
+If you are using GitHub Releases, ensure your release artifacts only contain the
+necessary files (`dist/`, `gemini-extension.json`, `package.json`). Exclude
+`node_modules` (users will install them) and `src/` to keep downloads small.

docs/extensions/index.md

@@ -1,377 +1,45 @@
 # Gemini CLI extensions
 
-_This documentation is up-to-date with the v0.4.0 release._
-
-Gemini CLI extensions package prompts, MCP servers, Agent Skills, and custom
-commands into a familiar and user-friendly format. With extensions, you can
-expand the capabilities of Gemini CLI and share those capabilities with others.
-They're designed to be easily installable and shareable.
+Gemini CLI extensions package prompts, MCP servers, custom commands, hooks,
+sub-agents, and agent skills into a familiar and user-friendly format. With
+extensions, you can expand the capabilities of Gemini CLI and share those
+capabilities with others. They are designed to be easily installable and
+shareable.
 
 To see examples of extensions, you can browse a gallery of
 [Gemini CLI extensions](https://geminicli.com/extensions/browse/).
 
-See [getting started docs](getting-started-extensions.md) for a guide on
-creating your first extension.
+## Managing extensions
 
-See [releasing docs](extension-releasing.md) for an advanced guide on setting up
-GitHub releases.
+You can verify your installed extensions and their status using the interactive
+command:
 
-## Extension management
-
-We offer a suite of extension management tools using `gemini extensions`
-commands.
-
-Note that these commands are not supported from within the CLI, although you can
-list installed extensions using the `/extensions list` subcommand.
-
-Note that all of these commands will only be reflected in active CLI sessions on
-restart.
-
-### Installing an extension
-
-You can install an extension using `gemini extensions install` with either a
-GitHub URL or a local path.
-
-Note that we create a copy of the installed extension, so you will need to run
-`gemini extensions update` to pull in changes from both locally-defined
-extensions and those on GitHub.
-
-NOTE: If you are installing an extension from GitHub, you'll need to have `git`
-installed on your machine. See
-[git installation instructions](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git)
-for help.
-
-```
-gemini extensions install <source> [--ref <ref>] [--auto-update] [--pre-release] [--consent]
+```bash
+/extensions list
 ```
 
-- `<source>`: The github URL or local path of the extension to install.
-- `--ref`: The git ref to install from.
-- `--auto-update`: Enable auto-update for this extension.
-- `--pre-release`: Enable pre-release versions for this extension.
-- `--consent`: Acknowledge the security risks of installing an extension and
-  skip the confirmation prompt.
+or in noninteractive mode:
 
-### Uninstalling an extension
-
-To uninstall one or more extensions, run
-`gemini extensions uninstall <name...>`:
-
-```
-gemini extensions uninstall gemini-cli-security gemini-cli-another-extension
-```
-
-### Disabling an extension
-
-Extensions are, by default, enabled across all workspaces. You can disable an
-extension entirely or for specific workspace.
-
-```
-gemini extensions disable <name> [--scope <scope>]
-```
-
-- `<name>`: The name of the extension to disable.
-- `--scope`: The scope to disable the extension in (`user` or `workspace`).
-
-### Enabling an extension
-
-You can enable extensions using `gemini extensions enable <name>`. You can also
-enable an extension for a specific workspace using
-`gemini extensions enable <name> --scope=workspace` from within that workspace.
-
-```
-gemini extensions enable <name> [--scope <scope>]
-```
-
-- `<name>`: The name of the extension to enable.
-- `--scope`: The scope to enable the extension in (`user` or `workspace`).
-
-### Updating an extension
-
-For extensions installed from a local path or a git repository, you can
-explicitly update to the latest version (as reflected in the
-`gemini-extension.json` `version` field) with `gemini extensions update <name>`.
-
-You can update all extensions with:
-
-```
-gemini extensions update --all
-```
-
-### Create a boilerplate extension
-
-We offer several example extensions `context`, `custom-commands`,
-`exclude-tools` and `mcp-server`. You can view these examples
-[here](https://github.com/google-gemini/gemini-cli/tree/main/packages/cli/src/commands/extensions/examples).
-
-To copy one of these examples into a development directory using the type of
-your choosing, run:
-
-```
-gemini extensions new <path> [template]
-```
-
-- `<path>`: The path to create the extension in.
-- `[template]`: The boilerplate template to use.
-
-### Link a local extension
-
-The `gemini extensions link` command will create a symbolic link from the
-extension installation directory to the development path.
-
-This is useful so you don't have to run `gemini extensions update` every time
-you make changes you'd like to test.
-
-```
-gemini extensions link <path>
-```
-
-- `<path>`: The path of the extension to link.
-
-## How it works
-
-On startup, Gemini CLI looks for extensions in `<home>/.gemini/extensions`
-
-Extensions exist as a directory that contains a `gemini-extension.json` file.
-For example:
-
-`<home>/.gemini/extensions/my-extension/gemini-extension.json`
-
-### `gemini-extension.json`
-
-The `gemini-extension.json` file contains the configuration for the extension.
-The file has the following structure:
-
-```json
-{
-  "name": "my-extension",
-  "version": "1.0.0",
-  "mcpServers": {
-    "my-server": {
-      "command": "node my-server.js"
-    }
-  },
-  "contextFileName": "GEMINI.md",
-  "excludeTools": ["run_shell_command"]
-}
-```
-
-- `name`: The name of the extension. This is used to uniquely identify the
-  extension and for conflict resolution when extension commands have the same
-  name as user or project commands. The name should be lowercase or numbers and
-  use dashes instead of underscores or spaces. This is how users will refer to
-  your extension in the CLI. Note that we expect this name to match the
-  extension directory name.
-- `version`: The version of the extension.
-- `mcpServers`: A map of MCP servers to settings. The key is the name of the
-  server, and the value is the server configuration. These servers will be
-  loaded on startup just like MCP servers settings in a
-  [`settings.json` file](../get-started/configuration.md). If both an extension
-  and a `settings.json` file settings an MCP server with the same name, the
-  server defined in the `settings.json` file takes precedence.
-  - Note that all MCP server configuration options are supported except for
-    `trust`.
-- `contextFileName`: The name of the file that contains the context for the
-  extension. This will be used to load the context from the extension directory.
-  If this property is not used but a `GEMINI.md` file is present in your
-  extension directory, then that file will be loaded.
-- `excludeTools`: An array of tool names to exclude from the model. You can also
-  specify command-specific restrictions for tools that support it, like the
-  `run_shell_command` tool. For example,
-  `"excludeTools": ["run_shell_command(rm -rf)"]` will block the `rm -rf`
-  command. Note that this differs from the MCP server `excludeTools`
-  functionality, which can be listed in the MCP server config.
-
-When Gemini CLI starts, it loads all the extensions and merges their
-configurations. If there are any conflicts, the workspace configuration takes
-precedence.
-
-### Settings
-
-_Note: This is an experimental feature. We do not yet recommend extension
-authors introduce settings as part of their core flows._
-
-Extensions can define settings that the user will be prompted to provide upon
-installation. This is useful for things like API keys, URLs, or other
-configuration that the extension needs to function.
-
-To define settings, add a `settings` array to your `gemini-extension.json` file.
-Each object in the array should have the following properties:
-
-- `name`: A user-friendly name for the setting.
-- `description`: A description of the setting and what it's used for.
-- `envVar`: The name of the environment variable that the setting will be stored
-  as.
-- `sensitive`: Optional boolean. If true, obfuscates the input the user provides
-  and stores the secret in keychain storage. **Example**
-
-```json
-{
-  "name": "my-api-extension",
-  "version": "1.0.0",
-  "settings": [
-    {
-      "name": "API Key",
-      "description": "Your API key for the service.",
-      "envVar": "MY_API_KEY"
-    }
-  ]
-}
-```
-
-When a user installs this extension, they will be prompted to enter their API
-key. The value will be saved to a `.env` file in the extension's directory
-(e.g., `<home>/.gemini/extensions/my-api-extension/.env`).
-
-You can view a list of an extension's settings by running:
-
-```
+```bash
 gemini extensions list
 ```
 
-and you can update a given setting using:
+## Installation
 
-```
-gemini extensions config <extension name> [setting name] [--scope <scope>]
+To install a real extension, you can use the `extensions install` command with a
+GitHub repository URL in noninteractive mode. For example:
+
+```bash
+gemini extensions install https://github.com/gemini-cli-extensions/workspace
 ```
 
-- `--scope`: The scope to set the setting in (`user` or `workspace`). This is
-  optional and will default to `user`.
+## Next steps
 
-### Custom commands
-
-Extensions can provide [custom commands](../cli/custom-commands.md) by placing
-TOML files in a `commands/` subdirectory within the extension directory. These
-commands follow the same format as user and project custom commands and use
-standard naming conventions.
-
-**Example**
-
-An extension named `gcp` with the following structure:
-
-```
-.gemini/extensions/gcp/
-├── gemini-extension.json
-└── commands/
-    ├── deploy.toml
-    └── gcs/
-        └── sync.toml
-```
-
-Would provide these commands:
-
-- `/deploy` - Shows as `[gcp] Custom command from deploy.toml` in help
-- `/gcs:sync` - Shows as `[gcp] Custom command from sync.toml` in help
-
-### Agent Skills
-
-_Note: This is an experimental feature enabled via `experimental.skills`._
-
-Extensions can bundle [Agent Skills](../cli/skills.md) to provide on-demand
-expertise and specialized workflows. To include skills in your extension, place
-them in a `skills/` subdirectory within the extension directory. Each skill must
-follow the [Agent Skills structure](../cli/skills.md#folder-structure),
-including a `SKILL.md` file.
-
-**Example**
-
-An extension named `security-toolkit` with the following structure:
-
-```
-.gemini/extensions/security-toolkit/
-├── gemini-extension.json
-└── skills/
-    ├── audit/
-    │   ├── SKILL.md
-    │   └── scripts/
-    │       └── scan.py
-    └── hardening/
-        └── SKILL.md
-```
-
-Upon installation, these skills will be discovered by Gemini CLI and can be
-activated during a session when the model identifies a task matching their
-descriptions.
-
-Extension skills have the lowest precedence and will be overridden by user or
-workspace skills of the same name. They can be viewed and managed (enabled or
-disabled) using the [`/skills` command](../cli/skills.md#managing-skills).
-
-### Hooks
-
-Extensions can provide [hooks](../hooks/index.md) to intercept and customize
-Gemini CLI behavior at specific lifecycle events. Hooks provided by an extension
-must be defined in a `hooks/hooks.json` file within the extension directory.
-
-> [!IMPORTANT] Hooks are not defined directly in `gemini-extension.json`. The
-> CLI specifically looks for the `hooks/hooks.json` file.
-
-#### Directory structure
-
-```
-.gemini/extensions/my-extension/
-├── gemini-extension.json
-└── hooks/
-    └── hooks.json
-```
-
-#### `hooks/hooks.json` format
-
-The `hooks.json` file contains a `hooks` object where keys are
-[event names](../hooks/reference.md#supported-events) and values are arrays of
-[hook definitions](../hooks/reference.md#hook-definition).
-
-```json
-{
-  "hooks": {
-    "before_agent": [
-      {
-        "hooks": [
-          {
-            "type": "command",
-            "command": "node ${extensionPath}/scripts/setup.js",
-            "name": "Extension Setup"
-          }
-        ]
-      }
-    ]
-  }
-}
-```
-
-#### Supported variables
-
-Just like `gemini-extension.json`, the `hooks/hooks.json` file supports
-[variable substitution](#variables). This is particularly useful for referencing
-scripts within the extension directory using `${extensionPath}`.
-
-### Conflict resolution
-
-Extension commands have the lowest precedence. When a conflict occurs with user
-or project commands:
-
-1. **No conflict**: Extension command uses its natural name (e.g., `/deploy`)
-2. **With conflict**: Extension command is renamed with the extension prefix
-   (e.g., `/gcp.deploy`)
-
-For example, if both a user and the `gcp` extension define a `deploy` command:
-
-- `/deploy` - Executes the user's deploy command
-- `/gcp.deploy` - Executes the extension's deploy command (marked with `[gcp]`
-  tag)
-
-### Variables
-
-Gemini CLI extensions allow variable substitution in both
-`gemini-extension.json` and `hooks/hooks.json`. This can be useful if e.g., you
-need the current directory to run an MCP server or hook script using
-`"cwd": "${extensionPath}${/}run.ts"`.
-
-**Supported variables:**
-
-| variable                   | description                                                                                                                                                     |
-| -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `${extensionPath}`         | The fully-qualified path of the extension in the user's filesystem e.g., '/Users/username/.gemini/extensions/example-extension'. This will not unwrap symlinks. |
-| `${workspacePath}`         | The fully-qualified path of the current workspace.                                                                                                              |
-| `${/} or ${pathSeparator}` | The path separator (differs per OS).                                                                                                                            |
-| `${process.execPath}`      | The path to the Node.js binary executing the CLI.                                                                                                               |
+- [Writing extensions](writing-extensions.md): Learn how to create your first
+  extension.
+- [Extensions reference](reference.md): Deeply understand the extension format,
+  commands, and configuration.
+- [Best practices](best-practices.md): Learn strategies for building great
+  extensions.
+- [Extensions releasing](releasing.md): Learn how to share your extensions with
+  the world.

docs/extensions/reference.md

@@ -0,0 +1,336 @@
+# Extensions reference
+
+This guide covers the `gemini extensions` commands and the structure of the
+`gemini-extension.json` configuration file.
+
+## Extension management
+
+We offer a suite of extension management tools using `gemini extensions`
+commands.
+
+Note that these commands (e.g. `gemini extensions install`) are not supported
+from within the CLI's **interactive mode**, although you can list installed
+extensions using the `/extensions list` slash command.
+
+Note that all of these management operations (including updates to slash
+commands) will only be reflected in active CLI sessions on **restart**.
+
+### Installing an extension
+
+You can install an extension using `gemini extensions install` with either a
+GitHub URL or a local path.
+
+Note that we create a copy of the installed extension, so you will need to run
+`gemini extensions update` to pull in changes from both locally-defined
+extensions and those on GitHub.
+
+NOTE: If you are installing an extension from GitHub, you'll need to have `git`
+installed on your machine. See
+[git installation instructions](https://git-scm.com/book/en/v2/Getting-Started-Installing-Git)
+for help.
+
+```
+gemini extensions install <source> [--ref <ref>] [--auto-update] [--pre-release] [--consent]
+```
+
+- `<source>`: The github URL or local path of the extension to install.
+- `--ref`: The git ref to install from.
+- `--auto-update`: Enable auto-update for this extension.
+- `--pre-release`: Enable pre-release versions for this extension.
+- `--consent`: Acknowledge the security risks of installing an extension and
+  skip the confirmation prompt.
+
+### Uninstalling an extension
+
+To uninstall one or more extensions, run
+`gemini extensions uninstall <name...>`:
+
+```
+gemini extensions uninstall gemini-cli-security gemini-cli-another-extension
+```
+
+### Disabling an extension
+
+Extensions are, by default, enabled across all workspaces. You can disable an
+extension entirely or for specific workspace.
+
+```
+gemini extensions disable <name> [--scope <scope>]
+```
+
+- `<name>`: The name of the extension to disable.
+- `--scope`: The scope to disable the extension in (`user` or `workspace`).
+
+### Enabling an extension
+
+You can enable extensions using `gemini extensions enable <name>`. You can also
+enable an extension for a specific workspace using
+`gemini extensions enable <name> --scope=workspace` from within that workspace.
+
+```
+gemini extensions enable <name> [--scope <scope>]
+```
+
+- `<name>`: The name of the extension to enable.
+- `--scope`: The scope to enable the extension in (`user` or `workspace`).
+
+### Updating an extension
+
+For extensions installed from a local path or a git repository, you can
+explicitly update to the latest version (as reflected in the
+`gemini-extension.json` `version` field) with `gemini extensions update <name>`.
+
+You can update all extensions with:
+
+```
+gemini extensions update --all
+```
+
+### Create a boilerplate extension
+
+We offer several example extensions `context`, `custom-commands`,
+`exclude-tools` and `mcp-server`. You can view these examples
+[here](https://github.com/google-gemini/gemini-cli/tree/main/packages/cli/src/commands/extensions/examples).
+
+To copy one of these examples into a development directory using the type of
+your choosing, run:
+
+```
+gemini extensions new <path> [template]
+```
+
+- `<path>`: The path to create the extension in.
+- `[template]`: The boilerplate template to use.
+
+### Link a local extension
+
+The `gemini extensions link` command will create a symbolic link from the
+extension installation directory to the development path.
+
+This is useful so you don't have to run `gemini extensions update` every time
+you make changes you'd like to test.
+
+```
+gemini extensions link <path>
+```
+
+- `<path>`: The path of the extension to link.
+
+## Extension format
+
+On startup, Gemini CLI looks for extensions in `<home>/.gemini/extensions`
+
+Extensions exist as a directory that contains a `gemini-extension.json` file.
+For example:
+
+`<home>/.gemini/extensions/my-extension/gemini-extension.json`
+
+### `gemini-extension.json`
+
+The `gemini-extension.json` file contains the configuration for the extension.
+The file has the following structure:
+
+```json
+{
+  "name": "my-extension",
+  "version": "1.0.0",
+  "description": "My awesome extension",
+  "mcpServers": {
+    "my-server": {
+      "command": "node my-server.js"
+    }
+  },
+  "contextFileName": "GEMINI.md",
+  "excludeTools": ["run_shell_command"]
+}
+```
+
+- `name`: The name of the extension. This is used to uniquely identify the
+  extension and for conflict resolution when extension commands have the same
+  name as user or project commands. The name should be lowercase or numbers and
+  use dashes instead of underscores or spaces. This is how users will refer to
+  your extension in the CLI. Note that we expect this name to match the
+  extension directory name.
+- `version`: The version of the extension.
+- `description`: A short description of the extension. This will be displayed on
+  [geminicli.com/extensions](https://geminicli.com/extensions).
+- `mcpServers`: A map of MCP servers to settings. The key is the name of the
+  server, and the value is the server configuration. These servers will be
+  loaded on startup just like MCP servers settingsd in a
+  [`settings.json` file](../get-started/configuration.md). If both an extension
+  and a `settings.json` file settings an MCP server with the same name, the
+  server defined in the `settings.json` file takes precedence.
+  - Note that all MCP server configuration options are supported except for
+    `trust`.
+- `contextFileName`: The name of the file that contains the context for the
+  extension. This will be used to load the context from the extension directory.
+  If this property is not used but a `GEMINI.md` file is present in your
+  extension directory, then that file will be loaded.
+- `excludeTools`: An array of tool names to exclude from the model. You can also
+  specify command-specific restrictions for tools that support it, like the
+  `run_shell_command` tool. For example,
+  `"excludeTools": ["run_shell_command(rm -rf)"]` will block the `rm -rf`
+  command. Note that this differs from the MCP server `excludeTools`
+  functionality, which can be listed in the MCP server config.
+
+When Gemini CLI starts, it loads all the extensions and merges their
+configurations. If there are any conflicts, the workspace configuration takes
+precedence.
+
+### Settings
+
+_Note: This is an experimental feature. We do not yet recommend extension
+authors introduce settings as part of their core flows._
+
+Extensions can define settings that the user will be prompted to provide upon
+installation. This is useful for things like API keys, URLs, or other
+configuration that the extension needs to function.
+
+To define settings, add a `settings` array to your `gemini-extension.json` file.
+Each object in the array should have the following properties:
+
+- `name`: A user-friendly name for the setting.
+- `description`: A description of the setting and what it's used for.
+- `envVar`: The name of the environment variable that the setting will be stored
+  as.
+- `sensitive`: Optional boolean. If true, obfuscates the input the user provides
+  and stores the secret in keychain storage. **Example**
+
+```json
+{
+  "name": "my-api-extension",
+  "version": "1.0.0",
+  "settings": [
+    {
+      "name": "API Key",
+      "description": "Your API key for the service.",
+      "envVar": "MY_API_KEY"
+    }
+  ]
+}
+```
+
+When a user installs this extension, they will be prompted to enter their API
+key. The value will be saved to a `.env` file in the extension's directory
+(e.g., `<home>/.gemini/extensions/my-api-extension/.env`).
+
+You can view a list of an extension's settings by running:
+
+```
+gemini extensions list
+```
+
+and you can update a given setting using:
+
+```
+gemini extensions config <extension name> [setting name] [--scope <scope>]
+```
+
+- `--scope`: The scope to set the setting in (`user` or `workspace`). This is
+  optional and will default to `user`.
+
+### Custom commands
+
+Extensions can provide [custom commands](../cli/custom-commands.md) by placing
+TOML files in a `commands/` subdirectory within the extension directory. These
+commands follow the same format as user and project custom commands and use
+standard naming conventions.
+
+**Example**
+
+An extension named `gcp` with the following structure:
+
+```
+.gemini/extensions/gcp/
+├── gemini-extension.json
+└── commands/
+    ├── deploy.toml
+    └── gcs/
+        └── sync.toml
+```
+
+Would provide these commands:
+
+- `/deploy` - Shows as `[gcp] Custom command from deploy.toml` in help
+- `/gcs:sync` - Shows as `[gcp] Custom command from sync.toml` in help
+
+### Hooks
+
+Extensions can provide [hooks](../hooks/index.md) to intercept and customize
+Gemini CLI behavior at specific lifecycle events. Hooks provided by an extension
+must be defined in a `hooks/hooks.json` file within the extension directory.
+
+> [!IMPORTANT] Hooks are not defined directly in `gemini-extension.json`. The
+> CLI specifically looks for the `hooks/hooks.json` file.
+
+### Agent Skills
+
+Extensions can bundle [Agent Skills](../cli/skills.md) to provide specialized
+workflows. Skills must be placed in a `skills/` directory within the extension.
+
+**Example**
+
+An extension with the following structure:
+
+```
+.gemini/extensions/my-extension/
+├── gemini-extension.json
+└── skills/
+    └── security-audit/
+        └── SKILL.md
+```
+
+Will expose a `security-audit` skill that the model can activate.
+
+### Sub-agents
+
+> **Note: Sub-agents are currently an experimental feature.**
+
+Extensions can provide [sub-agents](../core/subagents.md) that users can
+delegate tasks to.
+
+To bundle sub-agents with your extension, create an `agents/` directory in your
+extension's root folder and add your agent definition files (`.md`) there.
+
+**Example**
+
+```
+.gemini/extensions/my-extension/
+├── gemini-extension.json
+└── agents/
+    ├── security-auditor.md
+    └── database-expert.md
+```
+
+Gemini CLI will automatically discover and load these agents when the extension
+is installed and enabled.
+
+### Conflict resolution
+
+Extension commands have the lowest precedence. When a conflict occurs with user
+or project commands:
+
+1. **No conflict**: Extension command uses its natural name (e.g., `/deploy`)
+2. **With conflict**: Extension command is renamed with the extension prefix
+   (e.g., `/gcp.deploy`)
+
+For example, if both a user and the `gcp` extension define a `deploy` command:
+
+- `/deploy` - Executes the user's deploy command
+- `/gcp.deploy` - Executes the extension's deploy command (marked with `[gcp]`
+  tag)
+
+## Variables
+
+Gemini CLI extensions allow variable substitution in both
+`gemini-extension.json` and `hooks/hooks.json`. This can be useful if e.g., you
+need the current directory to run an MCP server using an argument like
+`"args": ["${extensionPath}${/}dist${/}server.js"]`.
+
+**Supported variables:**
+
+| variable                   | description                                                                                                                                                     |
+| -------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `${extensionPath}`         | The fully-qualified path of the extension in the user's filesystem e.g., '/Users/username/.gemini/extensions/example-extension'. This will not unwrap symlinks. |
+| `${workspacePath}`         | The fully-qualified path of the current workspace.                                                                                                              |
+| `${/} or ${pathSeparator}` | The path separator (differs per OS).                                                                                                                            |

docs/extensions/writing-extensions.md

@@ -8,7 +8,19 @@ file.
 ## Prerequisites
 
 Before you start, make sure you have the Gemini CLI installed and a basic
-understanding of Node.js and TypeScript.
+understanding of Node.js.
+
+## When to use what
+
+Extensions offer a variety of ways to customize Gemini CLI.
+
+| Feature                                                        | What it is                                                                                                         | When to use it                                                                                                                                                                                                                                                                                 | Invoked by            |
+| :------------------------------------------------------------- | :----------------------------------------------------------------------------------------------------------------- | :--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :-------------------- |
+| **[MCP server](reference.md#mcp-servers)**                     | A standard way to expose new tools and data sources to the model.                                                  | Use this when you want the model to be able to _do_ new things, like fetching data from an internal API, querying a database, or controlling a local application. We also support MCP resources (which can replace custom commands) and system instructions (which can replace custom context) | Model                 |
+| **[Custom commands](../cli/custom-commands.md)**               | A shortcut (like `/my-cmd`) that executes a pre-defined prompt or shell command.                                   | Use this for repetitive tasks or to save long, complex prompts that you use frequently. Great for automation.                                                                                                                                                                                  | User                  |
+| **[Context file (`GEMINI.md`)](reference.md#contextfilename)** | A markdown file containing instructions that are loaded into the model's context at the start of every session.    | Use this to define the "personality" of your extension, set coding standards, or provide essential knowledge that the model should always have.                                                                                                                                                | CLI provides to model |
+| **[Agent skills](../cli/skills.md)**                           | A specialized set of instructions and workflows that the model activates only when needed.                         | Use this for complex, occasional tasks (like "create a PR" or "audit security") to avoid cluttering the main context window when the skill isn't being used.                                                                                                                                   | Model                 |
+| **[Hooks](../hooks/index.md)**                                 | A way to intercept and customize the CLI's behavior at specific lifecycle events (e.g., before/after a tool call). | Use this when you want to automate actions based on what the model is doing, like validating tool arguments, logging activity, or modifying the model's input/output.                                                                                                                          | CLI                   |
 
 ## Step 1: Create a new extension
 
@@ -26,10 +38,9 @@ This will create a new directory with the following structure:
 
 ```
 my-first-extension/
-├── example.ts
+├── example.js
 ├── gemini-extension.json
-├── package.json
-└── tsconfig.json
+└── package.json
 ```
 
 ## Step 2: Understand the extension files
@@ -43,12 +54,12 @@ and use your extension.
 
 ```json
 {
-  "name": "my-first-extension",
+  "name": "mcp-server-example",
   "version": "1.0.0",
   "mcpServers": {
     "nodeServer": {
       "command": "node",
-      "args": ["${extensionPath}${/}dist${/}example.js"],
+      "args": ["${extensionPath}${/}example.js"],
       "cwd": "${extensionPath}"
     }
   }
@@ -64,12 +75,12 @@ and use your extension.
     with the absolute path to your extension's installation directory. This
     allows your extension to work regardless of where it's installed.
 
-### `example.ts`
+### `example.js`
 
 This file contains the source code for your MCP server. It's a simple Node.js
 server that uses the `@modelcontextprotocol/sdk`.
 
-```typescript
+```javascript
 /**
  * @license
  * Copyright 2025 Google LLC
@@ -118,16 +129,15 @@ await server.connect(transport);
 This server defines a single tool called `fetch_posts` that fetches data from a
 public API.
 
-### `package.json` and `tsconfig.json`
+### `package.json`
 
-These are standard configuration files for a TypeScript project. The
-`package.json` file defines dependencies and a `build` script, and
-`tsconfig.json` configures the TypeScript compiler.
+This is the standard configuration file for a Node.js project. It defines
+dependencies and scripts.
 
-## Step 3: Build and link your extension
+## Step 3: Link your extension
 
-Before you can use the extension, you need to compile the TypeScript code and
-link the extension to your Gemini CLI installation for local development.
+Before you can use the extension, you need to link it to your Gemini CLI
+installation for local development.
 
 1.  **Install dependencies:**
 
@@ -136,16 +146,7 @@ link the extension to your Gemini CLI installation for local development.
     npm install
     ```
 
-2.  **Build the server:**
-
-    ```bash
-    npm run build
-    ```
-
-    This will compile `example.ts` into `dist/example.js`, which is the file
-    referenced in your `gemini-extension.json`.
-
-3.  **Link the extension:**
+2.  **Link the extension:**
 
     The `link` command creates a symbolic link from the Gemini CLI extensions
     directory to your development directory. This means any changes you make
@@ -212,7 +213,7 @@ need this for extensions built to expose commands and prompts.
       "mcpServers": {
         "nodeServer": {
           "command": "node",
-          "args": ["${extensionPath}${/}dist${/}example.js"],
+          "args": ["${extensionPath}${/}example.js"],
           "cwd": "${extensionPath}"
         }
       }
@@ -224,8 +225,6 @@ file in every session where the extension is active.
 
 ## (Optional) Step 6: Add an Agent Skill
 
-_Note: This is an experimental feature enabled via `experimental.skills`._
-
 [Agent Skills](../cli/skills.md) let you bundle specialized expertise and
 procedural workflows. Unlike `GEMINI.md`, which provides persistent context,
 skills are activated only when needed, saving context tokens.
@@ -265,7 +264,7 @@ primary ways of releasing extensions are via a Git repository or through GitHub
 Releases. Using a public Git repository is the simplest method.
 
 For detailed instructions on both methods, please refer to the
-[Extension Releasing Guide](./extension-releasing.md).
+[Extension Releasing Guide](./releasing.md).
 
 ## Conclusion
 

docs/get-started/configuration-v1.md

@@ -215,14 +215,6 @@ a few things you can try in order of recommendation:
     MCP servers of their own. This should not be used as an airtight security
     mechanism.
 
-- **`autoAccept`** (boolean):
-  - **Description:** Controls whether the CLI automatically accepts and executes
-    tool calls that are considered safe (e.g., read-only operations) without
-    explicit user confirmation. If set to `true`, the CLI will bypass the
-    confirmation prompt for tools deemed safe.
-  - **Default:** `false`
-  - **Example:** `"autoAccept": true`
-
 - **`theme`** (string):
   - **Description:** Sets the visual [theme](../cli/themes.md) for Gemini CLI.
   - **Default:** `"Default"`

docs/get-started/configuration.md

@@ -170,6 +170,15 @@ their corresponding top-level category object in your `settings.json` file.
     available options.
   - **Default:** `undefined`
 
+- **`ui.autoThemeSwitching`** (boolean):
+  - **Description:** Automatically switch between default light and dark themes
+    based on terminal background color.
+  - **Default:** `true`
+
+- **`ui.terminalBackgroundPollingInterval`** (number):
+  - **Description:** Interval in seconds to poll the terminal background color.
+  - **Default:** `60`
+
 - **`ui.customThemes`** (object):
   - **Description:** Custom theme definitions.
   - **Default:** `{}`
@@ -244,8 +253,8 @@ their corresponding top-level category object in your `settings.json` file.
   - **Description:** Show the model name in the chat for each model turn.
   - **Default:** `false`
 
-- **`ui.useFullWidth`** (boolean):
-  - **Description:** Use the entire width of the terminal for output.
+- **`ui.showUserIdentity`** (boolean):
+  - **Description:** Show the logged-in user's identity (e.g. email) in the UI.
   - **Default:** `true`
 
 - **`ui.useAlternateBuffer`** (boolean):
@@ -254,6 +263,10 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `false`
   - **Requires restart:** Yes
 
+- **`ui.useBackgroundColor`** (boolean):
+  - **Description:** Whether to use background colors in the UI.
+  - **Default:** `true`
+
 - **`ui.incrementalRendering`** (boolean):
   - **Description:** Enable incremental rendering for the UI. This option will
     reduce flickering but may cause rendering artifacts. Only supported when
@@ -261,6 +274,10 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `true`
   - **Requires restart:** Yes
 
+- **`ui.showSpinner`** (boolean):
+  - **Description:** Show the spinner during operations.
+  - **Default:** `true`
+
 - **`ui.customWittyPhrases`** (array):
   - **Description:** Custom witty phrases to display during loading. When
     provided, the CLI cycles through these instead of the defaults.
@@ -318,6 +335,12 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `0.5`
   - **Requires restart:** Yes
 
+- **`model.disableLoopDetection`** (boolean):
+  - **Description:** Disable automatic detection and prevention of infinite
+    loops.
+  - **Default:** `false`
+  - **Requires restart:** Yes
+
 - **`model.skipNextSpeakerCheck`** (boolean):
   - **Description:** Skip the next speaker check.
   - **Default:** `true`
@@ -612,6 +635,14 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `true`
   - **Requires restart:** Yes
 
+- **`context.fileFiltering.customIgnoreFilePaths`** (array):
+  - **Description:** Additional ignore file paths to respect. These files take
+    precedence over .geminiignore and .gitignore. Files earlier in the array
+    take precedence over files later in the array, e.g. the first file takes
+    precedence over the second one.
+  - **Default:** `[]`
+  - **Requires restart:** Yes
+
 #### `tools`
 
 - **`tools.sandbox`** (boolean | string):
@@ -645,10 +676,12 @@ their corresponding top-level category object in your `settings.json` file.
     performance.
   - **Default:** `true`
 
-- **`tools.autoAccept`** (boolean):
-  - **Description:** Automatically accept and execute tool calls that are
-    considered safe (e.g., read-only operations).
-  - **Default:** `false`
+- **`tools.approvalMode`** (enum):
+  - **Description:** The default approval mode for tool execution. 'default'
+    prompts for approval, 'auto_edit' auto-approves edit tools, and 'plan' is
+    read-only mode. 'yolo' is not supported yet.
+  - **Default:** `"default"`
+  - **Values:** `"default"`, `"auto_edit"`, `"plan"`
 
 - **`tools.core`** (array):
   - **Description:** Restrict the set of built-in tools with an allowlist. Match
@@ -710,12 +743,6 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `true`
   - **Requires restart:** Yes
 
-- **`tools.enableHooks`** (boolean):
-  - **Description:** Enables the hooks system experiment. When disabled, the
-    hooks system is completely deactivated regardless of other settings.
-  - **Default:** `true`
-  - **Requires restart:** Yes
-
 #### `mcp`
 
 - **`mcp.serverCommand`** (string):
@@ -756,9 +783,16 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `false`
   - **Requires restart:** Yes
 
+- **`security.allowedExtensions`** (array):
+  - **Description:** List of Regex patterns for allowed extensions. If nonempty,
+    only extensions that match the patterns in this list are allowed. Overrides
+    the blockGitExtensions setting.
+  - **Default:** `[]`
+  - **Requires restart:** Yes
+
 - **`security.folderTrust.enabled`** (boolean):
   - **Description:** Setting to track whether Folder trust is enabled.
-  - **Default:** `false`
+  - **Default:** `true`
   - **Requires restart:** Yes
 
 - **`security.environmentVariableRedaction.allowed`** (array):
@@ -850,11 +884,6 @@ their corresponding top-level category object in your `settings.json` file.
   - **Default:** `false`
   - **Requires restart:** Yes
 
-- **`experimental.skills`** (boolean):
-  - **Description:** Enable Agent Skills (experimental).
-  - **Default:** `false`
-  - **Requires restart:** Yes
-
 - **`experimental.useOSC52Paste`** (boolean):
   - **Description:** Use OSC 52 sequence for pasting instead of clipboardy
     (useful for remote sessions).
@@ -867,6 +896,11 @@ their corresponding top-level category object in your `settings.json` file.
 
 #### `skills`
 
+- **`skills.enabled`** (boolean):
+  - **Description:** Enable Agent Skills.
+  - **Default:** `true`
+  - **Requires restart:** Yes
+
 - **`skills.disabled`** (array):
   - **Description:** List of disabled skills.
   - **Default:** `[]`
@@ -878,6 +912,7 @@ their corresponding top-level category object in your `settings.json` file.
   - **Description:** Canonical toggle for the hooks system. When disabled, no
     hooks will be executed.
   - **Default:** `true`
+  - **Requires restart:** Yes
 
 - **`hooksConfig.disabled`** (array):
   - **Description:** List of hook names (commands) that should be disabled.
@@ -1141,6 +1176,13 @@ the `advanced.excludedEnvVars` setting in your `settings.json` file.
   - Specifies the default Gemini model to use.
   - Overrides the hardcoded default
   - Example: `export GEMINI_MODEL="gemini-3-flash-preview"`
+- **`GEMINI_CLI_HOME`**:
+  - Specifies the root directory for Gemini CLI's user-level configuration and
+    storage.
+  - By default, this is the user's system home directory. The CLI will create a
+    `.gemini` folder inside this directory.
+  - Useful for shared compute environments or keeping CLI state isolated.
+  - Example: `export GEMINI_CLI_HOME="/path/to/user/config"`
 - **`GOOGLE_API_KEY`**:
   - Your Google Cloud API key.
   - Required for using Vertex AI in express mode.
@@ -1161,6 +1203,10 @@ the `advanced.excludedEnvVars` setting in your `settings.json` file.
   - **Description:** The path to your Google Application Credentials JSON file.
   - **Example:**
     `export GOOGLE_APPLICATION_CREDENTIALS="/path/to/your/credentials.json"`
+- **`GOOGLE_GENAI_API_VERSION`**:
+  - Specifies the API version to use for Gemini API requests.
+  - When set, overrides the default API version used by the SDK.
+  - Example: `export GOOGLE_GENAI_API_VERSION="v1"`
 - **`OTLP_GOOGLE_CLOUD_PROJECT`**:
   - Your Google Cloud Project ID for Telemetry in Google Cloud
   - Example: `export OTLP_GOOGLE_CLOUD_PROJECT="YOUR_PROJECT_ID"`.

docs/hooks/best-practices.md

@@ -91,6 +91,7 @@ spawning a process for irrelevant events.
   "hooks": [
     {
       "name": "validate-writes",
+      "type": "command",
       "command": "./validate.sh"
     }
   ]
@@ -584,6 +585,7 @@ defaults to 60 seconds, but you should set stricter limits for fast hooks.
         "hooks": [
           {
             "name": "fast-validator",
+            "type": "command",
             "command": "./hooks/validate.sh",
             "timeout": 5000 // 5 seconds
           }

docs/hooks/index.md

@@ -1,32 +1,9 @@
-# Gemini CLI hooks (experimental)
+# Gemini CLI hooks
 
 Hooks are scripts or programs that Gemini CLI executes at specific points in the
 agentic loop, allowing you to intercept and customize behavior without modifying
 the CLI's source code.
 
-## Availability
-
-> **Experimental Feature**: Hooks are currently enabled by default only in the
-> **Preview** and **Nightly** release channels.
-
-If you are on the Stable channel, you must explicitly enable the hooks system in
-your `settings.json`:
-
-```json
-{
-  "hooksConfig": {
-    "enabled": true
-  }
-}
-```
-
-- **[Writing hooks guide](/docs/hooks/writing-hooks)**: A tutorial on creating
-  your first hook with comprehensive examples.
-- **[Hooks reference](/docs/hooks/reference)**: The definitive technical
-  specification of I/O schemas and exit codes.
-- **[Best practices](/docs/hooks/best-practices)**: Guidelines on security,
-  performance, and debugging.
-
 ## What are hooks?
 
 Hooks run synchronously as part of the agent loop—when a hook event fires,
@@ -43,6 +20,15 @@ With hooks, you can:
 - **Optimize behavior:** Dynamically filter available tools or adjust model
   parameters.
 
+### Getting started
+
+- **[Writing hooks guide](/docs/hooks/writing-hooks)**: A tutorial on creating
+  your first hook with comprehensive examples.
+- **[Best practices](/docs/hooks/best-practices)**: Guidelines on security,
+  performance, and debugging.
+- **[Hooks reference](/docs/hooks/reference)**: The definitive technical
+  specification of I/O schemas and exit codes.
+
 ## Core concepts
 
 ### Hook events
@@ -104,9 +90,8 @@ You can filter which specific tools or triggers fire your hook using the
 
 ## Configuration
 
-Hook definitions are configured in `settings.json`. Gemini CLI merges
-configurations from multiple layers in the following order of precedence
-(highest to lowest):
+Hooks are configured in `settings.json`. Gemini CLI merges configurations from
+multiple layers in the following order of precedence (highest to lowest):
 
 1.  **Project settings**: `.gemini/settings.json` in the current directory.
 2.  **User settings**: `~/.gemini/settings.json`.
@@ -126,8 +111,7 @@ configurations from multiple layers in the following order of precedence
             "name": "security-check",
             "type": "command",
             "command": "$GEMINI_PROJECT_DIR/.gemini/hooks/security.sh",
-            "timeout": 5000,
-            "sequential": false
+            "timeout": 5000
           }
         ]
       }
@@ -136,6 +120,18 @@ configurations from multiple layers in the following order of precedence
 }
 ```
 
+#### Hook configuration fields
+
+| Field         | Type   | Required  | Description                                                          |
+| :------------ | :----- | :-------- | :------------------------------------------------------------------- |
+| `type`        | string | **Yes**   | The execution engine. Currently only `"command"` is supported.       |
+| `command`     | string | **Yes\*** | The shell command to execute. (Required when `type` is `"command"`). |
+| `name`        | string | No        | A friendly name for identifying the hook in logs and CLI commands.   |
+| `timeout`     | number | No        | Execution timeout in milliseconds (default: 60000).                  |
+| `description` | string | No        | A brief explanation of the hook's purpose.                           |
+
+---
+
 ### Environment variables
 
 Hooks are executed with a sanitized environment.

docs/hooks/reference.md

@@ -18,6 +18,31 @@ including JSON schemas and API details.
 
 ---
 
+## Configuration schema
+
+Hooks are defined in `settings.json` within the `hooks` object. Each event
+(e.g., `BeforeTool`) contains an array of **hook definitions**.
+
+### Hook definition
+
+| Field        | Type      | Required | Description                                                                             |
+| :----------- | :-------- | :------- | :-------------------------------------------------------------------------------------- |
+| `matcher`    | `string`  | No       | A regex (for tools) or exact string (for lifecycle) to filter when the hook runs.       |
+| `sequential` | `boolean` | No       | If `true`, hooks in this group run one after another. If `false`, they run in parallel. |
+| `hooks`      | `array`   | **Yes**  | An array of **hook configurations**.                                                    |
+
+### Hook configuration
+
+| Field         | Type     | Required  | Description                                                          |
+| :------------ | :------- | :-------- | :------------------------------------------------------------------- |
+| `type`        | `string` | **Yes**   | The execution engine. Currently only `"command"` is supported.       |
+| `command`     | `string` | **Yes\*** | The shell command to execute. (Required when `type` is `"command"`). |
+| `name`        | `string` | No        | A friendly name for identifying the hook in logs and CLI commands.   |
+| `timeout`     | `number` | No        | Execution timeout in milliseconds (default: 60000).                  |
+| `description` | `string` | No        | A brief explanation of the hook's purpose.                           |
+
+---
+
 ## Base input schema
 
 All hooks receive these common fields via `stdin`:
@@ -142,6 +167,8 @@ case is response validation and automatic retries.
   - `reason`: Required if denied. This text is sent **to the agent as a new
     prompt** to request a correction.
   - `continue`: Set to `false` to **stop the session** without retrying.
+  - `hookSpecificOutput.clearContext`: If `true`, clears conversation history
+    (LLM memory) while preserving UI display.
 - **Exit Code 2 (Retry)**: Rejects the response and triggers an automatic retry
   turn using `stderr` as the feedback prompt.
 

docs/hooks/writing-hooks.md

@@ -194,6 +194,7 @@ main().catch((err) => {
         "hooks": [
           {
             "name": "intent-filter",
+            "type": "command",
             "command": "node .gemini/hooks/filter-tools.js"
           }
         ]
@@ -234,7 +235,13 @@ security.
     "SessionStart": [
       {
         "matcher": "startup",
-        "hooks": [{ "name": "init", "command": "node .gemini/hooks/init.js" }]
+        "hooks": [
+          {
+            "name": "init",
+            "type": "command",
+            "command": "node .gemini/hooks/init.js"
+          }
+        ]
       }
     ],
     "BeforeAgent": [
@@ -243,6 +250,7 @@ security.
         "hooks": [
           {
             "name": "memory",
+            "type": "command",
             "command": "node .gemini/hooks/inject-memories.js"
           }
         ]
@@ -252,7 +260,11 @@ security.
       {
         "matcher": "*",
         "hooks": [
-          { "name": "filter", "command": "node .gemini/hooks/rag-filter.js" }
+          {
+            "name": "filter",
+            "type": "command",
+            "command": "node .gemini/hooks/rag-filter.js"
+          }
         ]
       }
     ],
@@ -260,7 +272,11 @@ security.
       {
         "matcher": "write_file",
         "hooks": [
-          { "name": "security", "command": "node .gemini/hooks/security.js" }
+          {
+            "name": "security",
+            "type": "command",
+            "command": "node .gemini/hooks/security.js"
+          }
         ]
       }
     ],
@@ -268,7 +284,11 @@ security.
       {
         "matcher": "*",
         "hooks": [
-          { "name": "record", "command": "node .gemini/hooks/record.js" }
+          {
+            "name": "record",
+            "type": "command",
+            "command": "node .gemini/hooks/record.js"
+          }
         ]
       }
     ],
@@ -276,7 +296,11 @@ security.
       {
         "matcher": "*",
         "hooks": [
-          { "name": "validate", "command": "node .gemini/hooks/validate.js" }
+          {
+            "name": "validate",
+            "type": "command",
+            "command": "node .gemini/hooks/validate.js"
+          }
         ]
       }
     ],
@@ -284,7 +308,11 @@ security.
       {
         "matcher": "exit",
         "hooks": [
-          { "name": "save", "command": "node .gemini/hooks/consolidate.js" }
+          {
+            "name": "save",
+            "type": "command",
+            "command": "node .gemini/hooks/consolidate.js"
+          }
         ]
       }
     ]

docs/index.md

@@ -1,149 +1,123 @@
-# Welcome to Gemini CLI documentation
+# Gemini CLI documentation
 
-This documentation provides a comprehensive guide to installing, using, and
-developing Gemini CLI, a tool that lets you interact with Gemini models through
-a command-line interface.
+Gemini CLI is an open-source AI agent that brings the power of Gemini directly
+into your terminal. It is designed to be a terminal-first, extensible, and
+powerful tool for developers, engineers, SREs, and beyond.
 
-## Gemini CLI overview
+Gemini CLI integrates with your local environment. It can read and edit files,
+execute shell commands, and search the web, all while maintaining your project
+context.
 
-Gemini CLI brings the capabilities of Gemini models to your terminal in an
-interactive Read-Eval-Print Loop (REPL) environment. Gemini CLI consists of a
-client-side application (`packages/cli`) that communicates with a local server
-(`packages/core`), which in turn manages requests to the Gemini API and its AI
-models. Gemini CLI also contains a variety of tools for tasks such as performing
-file system operations, running shells, and web fetching, which are managed by
-`packages/core`.
+## Get started
 
-## Navigating the documentation
+Begin your journey with Gemini CLI by setting up your environment and learning
+the basics.
 
-This documentation is organized into the following sections:
+- **[Quickstart](./get-started/index.md):** A streamlined guide to get you
+  chatting in minutes.
+- **[Installation](./get-started/installation.md):** Instructions for macOS,
+  Linux, and Windows.
+- **[Authentication](./get-started/authentication.md):** Set up access using
+  Google OAuth, API keys, or Vertex AI.
+- **[Examples](./get-started/examples.md):** View common usage scenarios to
+  inspire your own workflows.
 
-### Overview
+## Use Gemini CLI
 
-- **[Architecture overview](./architecture.md):** Understand the high-level
-  design of Gemini CLI, including its components and how they interact.
-- **[Contribution guide](../CONTRIBUTING.md):** Information for contributors and
-  developers, including setup, building, testing, and coding conventions.
+Master the core capabilities that let Gemini CLI interact with your system
+safely and effectively.
 
-### Get started
-
-- **[Gemini CLI quickstart](./get-started/index.md):** Let's get started with
-  Gemini CLI.
-- **[Gemini 3 Pro on Gemini CLI](./get-started/gemini-3.md):** Learn how to
-  enable and use Gemini 3.
-- **[Authentication](./get-started/authentication.md):** Authenticate to Gemini
-  CLI.
-- **[Configuration](./get-started/configuration.md):** Learn how to configure
-  the CLI.
-- **[Installation](./get-started/installation.md):** Install and run Gemini CLI.
-- **[Examples](./get-started/examples.md):** Example usage of Gemini CLI.
-
-### CLI
-
-- **[Introduction: Gemini CLI](./cli/index.md):** Overview of the command-line
+- **[Using the CLI](./cli/index.md):** Learn the basics of the command-line
   interface.
-- **[Commands](./cli/commands.md):** Description of available CLI commands.
-- **[Checkpointing](./cli/checkpointing.md):** Documentation for the
-  checkpointing feature.
-- **[Custom commands](./cli/custom-commands.md):** Create your own commands and
-  shortcuts for frequently used prompts.
-- **[Enterprise](./cli/enterprise.md):** Gemini CLI for enterprise.
-- **[Headless mode](./cli/headless.md):** Use Gemini CLI programmatically for
-  scripting and automation.
-- **[Keyboard shortcuts](./cli/keyboard-shortcuts.md):** A reference for all
-  keyboard shortcuts to improve your workflow.
-- **[Model selection](./cli/model.md):** Select the model used to process your
-  commands with `/model`.
-- **[Sandbox](./cli/sandbox.md):** Isolate tool execution in a secure,
-  containerized environment.
-- **[Agent Skills](./cli/skills.md):** (Experimental) Extend the CLI with
-  specialized expertise and procedural workflows.
-- **[Settings](./cli/settings.md):** Configure various aspects of the CLI's
-  behavior and appearance with `/settings`.
-- **[Telemetry](./cli/telemetry.md):** Overview of telemetry in the CLI.
-- **[Themes](./cli/themes.md):** Themes for Gemini CLI.
-- **[Token caching](./cli/token-caching.md):** Token caching and optimization.
-- **[Trusted Folders](./cli/trusted-folders.md):** An overview of the Trusted
-  Folders security feature.
-- **[Tutorials](./cli/tutorials.md):** Tutorials for Gemini CLI.
-- **[Uninstall](./cli/uninstall.md):** Methods for uninstalling the Gemini CLI.
+- **[File management](./tools/file-system.md):** Grant the model the ability to
+  read code and apply changes directly to your files.
+- **[Shell commands](./tools/shell.md):** Allow the model to run builds, tests,
+  and git commands.
+- **[Memory management](./tools/memory.md):** Teach Gemini CLI facts about your
+  project and preferences that persist across sessions.
+- **[Project context](./cli/gemini-md.md):** Use `GEMINI.md` files to provide
+  persistent context for your projects.
+- **[Web search and fetch](./tools/web-search.md):** Enable the model to fetch
+  real-time information from the internet.
+- **[Session management](./cli/session-management.md):** Save, resume, and
+  organize your chat sessions.
 
-### Core
+## Configuration
 
-- **[Introduction: Gemini CLI core](./core/index.md):** Information about Gemini
-  CLI core.
-- **[Memport](./core/memport.md):** Using the Memory Import Processor.
-- **[Tools API](./core/tools-api.md):** Information on how the core manages and
-  exposes tools.
-- **[System Prompt Override](./cli/system-prompt.md):** Replace built-in system
-  instructions using `GEMINI_SYSTEM_MD`.
+Customize Gemini CLI to match your workflow and preferences.
 
-- **[Policy Engine](./core/policy-engine.md):** Use the Policy Engine for
-  fine-grained control over tool execution.
+- **[Settings](./cli/settings.md):** Control response creativity, output
+  verbosity, and more.
+- **[Model selection](./cli/model.md):** Choose the best Gemini model for your
+  specific task.
+- **[Ignore files](./cli/gemini-ignore.md):** Use `.geminiignore` to keep
+  sensitive files out of the model's context.
+- **[Trusted folders](./cli/trusted-folders.md):** Define security boundaries
+  for file access and execution.
+- **[Token caching](./cli/token-caching.md):** Optimize performance and cost by
+  caching context.
+- **[Themes](./cli/themes.md):** Personalize the visual appearance of the CLI.
 
-### Tools
+## Advanced features
 
-- **[Introduction: Gemini CLI tools](./tools/index.md):** Information about
-  Gemini CLI's tools.
-- **[File system tools](./tools/file-system.md):** Documentation for the
-  `read_file` and `write_file` tools.
-- **[Shell tool](./tools/shell.md):** Documentation for the `run_shell_command`
-  tool.
-- **[Web fetch tool](./tools/web-fetch.md):** Documentation for the `web_fetch`
-  tool.
-- **[Web search tool](./tools/web-search.md):** Documentation for the
-  `google_web_search` tool.
-- **[Memory tool](./tools/memory.md):** Documentation for the `save_memory`
-  tool.
-- **[Todo tool](./tools/todos.md):** Documentation for the `write_todos` tool.
-- **[MCP servers](./tools/mcp-server.md):** Using MCP servers with Gemini CLI.
+Explore powerful features for complex workflows and enterprise environments.
 
-### Extensions
+- **[Headless mode](./cli/headless.md):** Run Gemini CLI in scripts or CI/CD
+  pipelines for automated reasoning.
+- **[Sandboxing](./cli/sandbox.md):** Execute untrusted code or tools in a
+  secure, isolated container.
+- **[Checkpointing](./cli/checkpointing.md):** Save and restore workspace state
+  to recover from experimental changes.
+- **[Custom commands](./cli/custom-commands.md):** Create shortcuts for
+  frequently used prompts.
+- **[System prompt override](./cli/system-prompt.md):** Customize the core
+  instructions given to the model.
+- **[Telemetry](./cli/telemetry.md):** Understand how usage data is collected
+  and managed.
+- **[Enterprise](./cli/enterprise.md):** Manage configurations and policies for
+  large teams.
 
-- **[Introduction: Extensions](./extensions/index.md):** How to extend the CLI
-  with new functionality.
-- **[Get Started with extensions](./extensions/getting-started-extensions.md):**
-  Learn how to build your own extension.
-- **[Extension releasing](./extensions/extension-releasing.md):** How to release
-  Gemini CLI extensions.
+## Extensions
 
-### Hooks
+Extend Gemini CLI's capabilities with new tools and behaviors using extensions.
 
-- **[Hooks](./hooks/index.md):** Intercept and customize Gemini CLI behavior at
-  key lifecycle points.
-- **[Writing Hooks](./hooks/writing-hooks.md):** Learn how to create your first
-  hook with a comprehensive example.
-- **[Best Practices](./hooks/best-practices.md):** Security, performance, and
-  debugging guidelines for hooks.
+- **[Introduction](./extensions/index.md):** Learn about the extension system
+  and how to manage extensions.
+- **[Writing extensions](./extensions/writing-extensions.md):** Learn how to
+  create your first extension.
+- **[Extensions reference](./extensions/reference.md):** Deeply understand the
+  extension format, commands, and configuration.
+- **[Best practices](./extensions/best-practices.md):** Learn strategies for
+  building great extensions.
+- **[Extensions releasing](./extensions/releasing.md):** Learn how to share your
+  extensions with the world.
 
-### IDE integration
+## Ecosystem and extensibility
 
-- **[Introduction to IDE integration](./ide-integration/index.md):** Connect the
-  CLI to your editor.
-- **[IDE companion extension spec](./ide-integration/ide-companion-spec.md):**
-  Spec for building IDE companion extensions.
+Connect Gemini CLI to external services and other development tools.
 
-### Development
+- **[MCP servers](./tools/mcp-server.md):** Connect to external services using
+  the Model Context Protocol.
+- **[IDE integration](./ide-integration/index.md):** Use Gemini CLI alongside VS
+  Code.
+- **[Hooks](./hooks/index.md):** (Preview) Write scripts that run on specific
+  CLI events.
+- **[Agent skills](./cli/skills.md):** (Preview) Add specialized expertise and
+  workflows.
+- **[Sub-agents](./core/subagents.md):** (Preview) Delegate tasks to specialized
+  agents.
 
-- **[NPM](./npm.md):** Details on how the project's packages are structured.
-- **[Releases](./releases.md):** Information on the project's releases and
-  deployment cadence.
-- **[Changelog](./changelogs/index.md):** Highlights and notable changes to
+## Development and reference
+
+Deep dive into the architecture and contribute to the project.
+
+- **[Architecture](./architecture.md):** Understand the technical design of
   Gemini CLI.
-- **[Integration tests](./integration-tests.md):** Information about the
-  integration testing framework used in this project.
-- **[Issue and PR automation](./issue-and-pr-automation.md):** A detailed
-  overview of the automated processes we use to manage and triage issues and
-  pull requests.
-
-### Support
-
-- **[FAQ](./faq.md):** Frequently asked questions.
-- **[Troubleshooting guide](./troubleshooting.md):** Find solutions to common
-  problems.
-- **[Quota and pricing](./quota-and-pricing.md):** Learn about the free tier and
-  paid options.
-- **[Terms of service and privacy notice](./tos-privacy.md):** Information on
-  the terms of service and privacy notices applicable to your use of Gemini CLI.
-
-We hope this documentation helps you make the most of Gemini CLI!
+- **[Command reference](./cli/commands.md):** A complete list of available
+  commands.
+- **[Local development](./local-development.md):** Set up your environment to
+  contribute to Gemini CLI.
+- **[Contributing](../CONTRIBUTING.md):** Learn how to submit pull requests and
+  report issues.
+- **[FAQ](./faq.md):** Answers to common questions.
+- **[Troubleshooting](./troubleshooting.md):** Solutions for common issues.

docs/ralph-wiggum.md

@@ -0,0 +1,141 @@
+# Ralph Wiggum mode
+
+Ralph Wiggum mode is an iterative automation technique that lets Gemini CLI
+repeatedly execute a prompt until a specific goal is met. This mode is designed
+for tasks that benefit from persistent refinement, such as fixing failing tests
+or performing complex refactoring.
+
+> **Note:** This is a preview feature currently under active development.
+
+## Overview
+
+Inspired by the "Ralph Wiggum" technique, this mode treats failures as data and
+uses a feedback loop to reach a successful state. When you enable Ralph Wiggum
+mode, Gemini CLI enters YOLO (auto-approval) mode and continues to process the
+provided prompt until it detects your specified completion string in the model's
+output or reaches the maximum number of iterations.
+
+## Usage
+
+To use Ralph Wiggum mode, you must provide a prompt using the `-p` or `--prompt`
+flag. You then configure the loop behavior using the following flags:
+
+| Flag                   | Description                                                |
+| :--------------------- | :--------------------------------------------------------- |
+| `--ralph-wiggum`       | Enables the Ralph Wiggum iterative loop mode.              |
+| `--completion-promise` | The string to look for in the output to signal completion. |
+| `--max-iterations`     | The maximum number of times to run the loop (default: 10). |
+| `--memory-file`        | Task-specific memory file (default: `memories.md`).        |
+
+### Example
+
+The following command attempts to fix tests by running the loop up to 5 times
+until the string "TESTS PASSED" appears in the output, using a specific memory
+file for this task:
+
+```bash
+gemini -p "Fix the tests in packages/core" \
+  --ralph-wiggum \
+  --completion-promise "TESTS PASSED" \
+  --max-iterations 5 \
+  --memory-file "fix-core-tests.md"
+```
+
+## How it works
+
+When you run Gemini CLI with the `--ralph-wiggum` flag, the following process
+occurs:
+
+1.  **Enforces YOLO mode:** The tool automatically sets the approval mode to
+    `yolo`. This ensures that tool calls (like writing files or running shell
+    commands) are approved automatically to allow the automation to proceed
+    without human intervention.
+2.  **Iterative execution:** The CLI executes the provided prompt in a loop.
+3.  **Completion check:** After each iteration, the CLI scans the full text of
+    the assistant's response for the string provided in `--completion-promise`.
+4.  **Loop termination:**
+    - If the completion string is found, the loop exits successfully.
+    - If the completion string is not found, the CLI starts a new iteration
+      using the same initial prompt.
+    - If the number of iterations reaches the `--max-iterations` limit, the loop
+      stops.
+
+## Persistent context (Memories)
+
+To help the agent learn from previous attempts, Ralph Wiggum mode uses a
+`memories.md` file in your current working directory.
+
+- **Automatic creation:** If the file doesn't exist, the CLI creates it with a
+  default header.
+- **Context injection:** At the start of each iteration, the content of
+  `memories.md` is read and prepended to your prompt.
+- **Usage:** You (or the agent, via tool use) can write notes, error logs, or
+  successful patterns into this file. This allows the agent to "remember" what
+  failed in iteration 1 and avoid repeating the same mistake in iteration 2.
+
+## Summary statistics
+
+At the end of the execution, Ralph Wiggum mode provides a summary table in the
+terminal. This table details the performance of each iteration, including:
+
+- **Iteration number:** The sequence of the run.
+- **Status:** Whether the iteration met the completion promise ("Success") or
+  failed to do so ("Failed").
+- **Tests Passed/Failed:** If the output contains recognizable test runner
+  patterns (such as those from Vitest, Jest, or Mocha), the CLI extracts and
+  displays the number of passing and failing tests.
+
+### Example summary table
+
+```text
+--- Ralph Wiggum Mode Summary ---
+| Iteration | Status  | Tests Passed | Tests Failed |
+|-----------|---------|--------------|--------------|
+| 1         | Failed  | 2            | 10           |
+| 2         | Failed  | 8            | 4            |
+| 3         | Success | 12           | 0            |
+---------------------------------
+```
+
+## Best practices
+
+To get the most out of Ralph Wiggum mode, we recommend the following:
+
+- **Clear completion criteria:** Ensure your prompt instructs the model to emit
+  a specific, unique string (like "ALL TESTS PASSED") only when the task is
+  truly complete.
+- **Incremental goals:** Use prompts that encourage the model to make small,
+  verifiable changes in each iteration.
+- **Safety nets:** Always set a reasonable `--max-iterations` limit to prevent
+  unintended long-running processes.
+
+## Development and rebuilding
+
+If you're modifying Ralph Wiggum mode or enabling it in a development
+environment, you must recompile the TypeScript source code.
+
+### Full rebuild
+
+To build all packages in the monorepo, run the following command from the root
+directory:
+
+```bash
+npm run build
+```
+
+### Fast CLI rebuild
+
+If you've already performed a full build and are only making changes to the CLI
+package, you can run a targeted build:
+
+```bash
+npm run build -w @google/gemini-cli
+```
+
+### Running in development
+
+After rebuilding, test your changes using the `npm run start` script:
+
+```bash
+npm run start -- -p "Your task" --ralph-wiggum --completion-promise "SUCCESS"
+```

docs/sidebar.json

@@ -1,187 +1,54 @@
 [
-  {
-    "label": "Overview",
-    "items": [
-      {
-        "label": "Introduction",
-        "slug": "docs"
-      },
-      {
-        "label": "Architecture overview",
-        "slug": "docs/architecture"
-      },
-      {
-        "label": "Contribution guide",
-        "slug": "docs/contributing"
-      }
-    ]
-  },
   {
     "label": "Get started",
     "items": [
-      {
-        "label": "Gemini CLI quickstart",
-        "slug": "docs/get-started"
-      },
-      {
-        "label": "Gemini 3 on Gemini CLI",
-        "slug": "docs/get-started/gemini-3"
-      },
-      {
-        "label": "Authentication",
-        "slug": "docs/get-started/authentication"
-      },
-      {
-        "label": "Configuration",
-        "slug": "docs/get-started/configuration"
-      },
-      {
-        "label": "Installation",
-        "slug": "docs/get-started/installation"
-      },
-      {
-        "label": "Examples",
-        "slug": "docs/get-started/examples"
-      }
+      { "label": "Overview", "slug": "docs" },
+      { "label": "Quickstart", "slug": "docs/get-started" },
+      { "label": "Installation", "slug": "docs/get-started/installation" },
+      { "label": "Authentication", "slug": "docs/get-started/authentication" },
+      { "label": "Examples", "slug": "docs/get-started/examples" },
+      { "label": "Gemini 3 (preview)", "slug": "docs/get-started/gemini-3" },
+      { "label": "CLI Reference", "slug": "docs/cli/cli-reference" }
     ]
   },
   {
-    "label": "CLI",
+    "label": "Use Gemini CLI",
     "items": [
-      {
-        "label": "Introduction",
-        "slug": "docs/cli"
-      },
-      {
-        "label": "Commands",
-        "slug": "docs/cli/commands"
-      },
-      {
-        "label": "Checkpointing",
-        "slug": "docs/cli/checkpointing"
-      },
-      {
-        "label": "Custom commands",
-        "slug": "docs/cli/custom-commands"
-      },
-      {
-        "label": "Enterprise",
-        "slug": "docs/cli/enterprise"
-      },
-      {
-        "label": "Headless mode",
-        "slug": "docs/cli/headless"
-      },
-      {
-        "label": "Keyboard shortcuts",
-        "slug": "docs/cli/keyboard-shortcuts"
-      },
-      {
-        "label": "Model selection",
-        "slug": "docs/cli/model"
-      },
-      {
-        "label": "Sandbox",
-        "slug": "docs/cli/sandbox"
-      },
-      {
-        "label": "Session Management",
-        "slug": "docs/cli/session-management"
-      },
-      {
-        "label": "Agent Skills",
-        "slug": "docs/cli/skills"
-      },
-      {
-        "label": "Settings",
-        "slug": "docs/cli/settings"
-      },
-      {
-        "label": "Telemetry",
-        "slug": "docs/cli/telemetry"
-      },
-      {
-        "label": "Themes",
-        "slug": "docs/cli/themes"
-      },
-      {
-        "label": "Token caching",
-        "slug": "docs/cli/token-caching"
-      },
-      {
-        "label": "Trusted Folders",
-        "slug": "docs/cli/trusted-folders"
-      },
-      {
-        "label": "Tutorials",
-        "slug": "docs/cli/tutorials"
-      },
-      {
-        "label": "Uninstall",
-        "slug": "docs/cli/uninstall"
-      },
-      {
-        "label": "System prompt override",
-        "slug": "docs/cli/system-prompt"
-      }
+      { "label": "Using the CLI", "slug": "docs/cli" },
+      { "label": "File management", "slug": "docs/tools/file-system" },
+      { "label": "Memory management", "slug": "docs/tools/memory" },
+      { "label": "Project context (GEMINI.md)", "slug": "docs/cli/gemini-md" },
+      { "label": "Shell commands", "slug": "docs/tools/shell" },
+      { "label": "Session management", "slug": "docs/cli/session-management" },
+      { "label": "Todos", "slug": "docs/tools/todos" },
+      { "label": "Web search and fetch", "slug": "docs/tools/web-search" }
     ]
   },
   {
-    "label": "Core",
+    "label": "Configuration",
     "items": [
       {
-        "label": "Introduction",
-        "slug": "docs/core"
+        "label": "Ignore files (.geminiignore)",
+        "slug": "docs/cli/gemini-ignore"
       },
-      {
-        "label": "Tools API",
-        "slug": "docs/core/tools-api"
-      },
-      {
-        "label": "Memory Import Processor",
-        "slug": "docs/core/memport"
-      },
-      {
-        "label": "Policy Engine",
-        "slug": "docs/core/policy-engine"
-      }
+      { "label": "Model selection", "slug": "docs/cli/model" },
+      { "label": "Settings", "slug": "docs/cli/settings" },
+      { "label": "Themes", "slug": "docs/cli/themes" },
+      { "label": "Token caching", "slug": "docs/cli/token-caching" },
+      { "label": "Trusted folders", "slug": "docs/cli/trusted-folders" }
     ]
   },
   {
-    "label": "Tools",
+    "label": "Advanced features",
     "items": [
-      {
-        "label": "Introduction",
-        "slug": "docs/tools"
-      },
-      {
-        "label": "File system",
-        "slug": "docs/tools/file-system"
-      },
-      {
-        "label": "Shell",
-        "slug": "docs/tools/shell"
-      },
-      {
-        "label": "Web fetch",
-        "slug": "docs/tools/web-fetch"
-      },
-      {
-        "label": "Web search",
-        "slug": "docs/tools/web-search"
-      },
-      {
-        "label": "Memory",
-        "slug": "docs/tools/memory"
-      },
-      {
-        "label": "Todos",
-        "slug": "docs/tools/todos"
-      },
-      {
-        "label": "MCP servers",
-        "slug": "docs/tools/mcp-server"
-      }
+      { "label": "Checkpointing", "slug": "docs/cli/checkpointing" },
+      { "label": "Custom commands", "slug": "docs/cli/custom-commands" },
+      { "label": "Enterprise features", "slug": "docs/cli/enterprise" },
+      { "label": "Headless mode & scripting", "slug": "docs/cli/headless" },
+      { "label": "Ralph Wiggum mode", "slug": "docs/ralph-wiggum" },
+      { "label": "Sandboxing", "slug": "docs/cli/sandbox" },
+      { "label": "System prompt override", "slug": "docs/cli/system-prompt" },
+      { "label": "Telemetry", "slug": "docs/cli/telemetry" }
     ]
   },
   {
@@ -192,106 +59,95 @@
         "slug": "docs/extensions"
       },
       {
-        "label": "Get started with extensions",
-        "slug": "docs/extensions/getting-started-extensions"
+        "label": "Writing extensions",
+        "slug": "docs/extensions/writing-extensions"
       },
       {
-        "label": "Extension releasing",
-        "slug": "docs/extensions/extension-releasing"
-      }
-    ]
-  },
-  {
-    "label": "Hooks (experimental)",
-    "items": [
-      {
-        "label": "Introduction",
-        "slug": "docs/hooks"
-      },
-      {
-        "label": "Writing hooks",
-        "slug": "docs/hooks/writing-hooks"
-      },
-      {
-        "label": "Hooks reference",
-        "slug": "docs/hooks/reference"
+        "label": "Extensions reference",
+        "slug": "docs/extensions/reference"
       },
       {
         "label": "Best practices",
-        "slug": "docs/hooks/best-practices"
+        "slug": "docs/extensions/best-practices"
+      },
+      {
+        "label": "Extensions releasing",
+        "slug": "docs/extensions/releasing"
       }
     ]
   },
   {
-    "label": "IDE integration",
+    "label": "Ecosystem and extensibility",
     "items": [
+      { "label": "Agent skills", "slug": "docs/cli/skills" },
       {
-        "label": "Introduction",
-        "slug": "docs/ide-integration"
+        "label": "Creating Agent skills",
+        "slug": "docs/cli/creating-skills"
       },
       {
-        "label": "IDE companion spec",
-        "slug": "docs/ide-integration/ide-companion-spec"
-      }
+        "label": "Sub-agents (experimental)",
+        "slug": "docs/core/subagents"
+      },
+      {
+        "label": "Remote subagents (experimental)",
+        "slug": "docs/core/remote-agents"
+      },
+      { "label": "Hooks", "slug": "docs/hooks" },
+      { "label": "IDE integration", "slug": "docs/ide-integration" },
+      { "label": "MCP servers", "slug": "docs/tools/mcp-server" }
+    ]
+  },
+  {
+    "label": "Tutorials",
+    "items": [
+      {
+        "label": "Get started with extensions",
+        "slug": "docs/extensions/writing-extensions"
+      },
+      { "label": "How to write hooks", "slug": "docs/hooks/writing-hooks" }
+    ]
+  },
+  {
+    "label": "Reference",
+    "items": [
+      { "label": "Architecture", "slug": "docs/architecture" },
+      { "label": "Command reference", "slug": "docs/cli/commands" },
+      { "label": "Configuration", "slug": "docs/get-started/configuration" },
+      { "label": "Keyboard shortcuts", "slug": "docs/cli/keyboard-shortcuts" },
+      { "label": "Memory import processor", "slug": "docs/core/memport" },
+      { "label": "Policy engine", "slug": "docs/core/policy-engine" },
+      { "label": "Tools API", "slug": "docs/core/tools-api" }
+    ]
+  },
+  {
+    "label": "Resources",
+    "items": [
+      { "label": "FAQ", "slug": "docs/faq" },
+      { "label": "Quota and pricing", "slug": "docs/quota-and-pricing" },
+      {
+        "label": "Releases",
+        "items": [
+          { "label": "Release notes", "slug": "docs/changelogs/" },
+          { "label": "Stable release", "slug": "docs/changelogs/latest" },
+          { "label": "Preview release", "slug": "docs/changelogs/preview" }
+        ]
+      },
+      { "label": "Terms and privacy", "slug": "docs/tos-privacy" },
+      { "label": "Troubleshooting", "slug": "docs/troubleshooting" },
+      { "label": "Uninstall", "slug": "docs/cli/uninstall" }
     ]
   },
   {
     "label": "Development",
     "items": [
-      {
-        "label": "NPM",
-        "slug": "docs/npm"
-      },
-      {
-        "label": "Releases",
-        "slug": "docs/releases"
-      },
-      {
-        "label": "Integration tests",
-        "slug": "docs/integration-tests"
-      },
+      { "label": "Contribution guide", "slug": "docs/contributing" },
+      { "label": "Integration testing", "slug": "docs/integration-tests" },
       {
         "label": "Issue and PR automation",
         "slug": "docs/issue-and-pr-automation"
-      }
-    ]
-  },
-  {
-    "label": "Releases",
-    "items": [
-      {
-        "label": "Release notes",
-        "slug": "docs/changelogs/"
       },
-      {
-        "label": "Latest release",
-        "slug": "docs/changelogs/latest"
-      },
-      {
-        "label": "Preview release",
-        "slug": "docs/changelogs/preview"
-      }
-    ]
-  },
-  {
-    "label": "Support",
-    "items": [
-      {
-        "label": "FAQ",
-        "slug": "docs/faq"
-      },
-      {
-        "label": "Troubleshooting",
-        "slug": "docs/troubleshooting"
-      },
-      {
-        "label": "Quota and pricing",
-        "slug": "docs/quota-and-pricing"
-      },
-      {
-        "label": "Terms of service",
-        "slug": "docs/tos-privacy"
-      }
+      { "label": "Local development", "slug": "docs/local-development" },
+      { "label": "NPM package structure", "slug": "docs/npm" }
     ]
   }
 ]

docs/tools/file-system.md

@@ -117,14 +117,13 @@ directories) will be created.
   `Found 5 file(s) matching "*.ts" within src, sorted by modification time (newest first):\nsrc/file1.ts\nsrc/subdir/file2.ts...`
 - **Confirmation:** No.
 
-## 5. `search_file_content` (SearchText)
+## 5. `grep_search` (SearchText)
 
-`search_file_content` searches for a regular expression pattern within the
-content of files in a specified directory. Can filter files by a glob pattern.
-Returns the lines containing matches, along with their file paths and line
-numbers.
+`grep_search` searches for a regular expression pattern within the content of
+files in a specified directory. Can filter files by a glob pattern. Returns the
+lines containing matches, along with their file paths and line numbers.
 
-- **Tool name:** `search_file_content`
+- **Tool name:** `grep_search`
 - **Display name:** SearchText
 - **File:** `grep.ts`
 - **Parameters:**

docs/tools/index.md

@@ -91,8 +91,8 @@ Additionally, these tools incorporate:
 
 - **[MCP servers](./mcp-server.md)**: MCP servers act as a bridge between the
   Gemini model and your local environment or other services like APIs.
-- **[Agent Skills](../cli/skills.md)**: (Experimental) On-demand expertise
-  packages that are activated via the `activate_skill` tool to provide
-  specialized guidance and resources.
+- **[Agent Skills](../cli/skills.md)**: On-demand expertise packages that are
+  activated via the `activate_skill` tool to provide specialized guidance and
+  resources.
 - **[Sandboxing](../cli/sandbox.md)**: Sandboxing isolates the model and its
   changes from your environment to reduce potential risk.

docs/tools/mcp-server.md

@@ -739,10 +739,21 @@ The MCP integration tracks several states:
   cautiously and only for servers you completely control
 - **Access tokens:** Be security-aware when configuring environment variables
   containing API keys or tokens
+- **Environment variable redaction:** By default, the Gemini CLI redacts
+  sensitive environment variables (such as `GEMINI_API_KEY`, `GOOGLE_API_KEY`,
+  and variables matching patterns like `*TOKEN*`, `*SECRET*`, `*PASSWORD*`) when
+  spawning MCP servers using the `stdio` transport. This prevents unintended
+  exposure of your credentials to third-party servers.
+- **Explicit environment variables:** If you need to pass a specific environment
+  variable to an MCP server, you should define it explicitly in the `env`
+  property of the server configuration in `settings.json`.
 - **Sandbox compatibility:** When using sandboxing, ensure MCP servers are
-  available within the sandbox environment
+  available within the sandbox environment.
 - **Private data:** Using broadly scoped personal access tokens can lead to
-  information leakage between repositories
+  information leakage between repositories.
+- **Untrusted servers:** Be extremely cautious when adding MCP servers from
+  untrusted or third-party sources. Malicious servers could attempt to
+  exfiltrate data or perform unauthorized actions through the tools they expose.
 
 ### Performance and resource management
 
@@ -1038,6 +1049,29 @@ gemini mcp remove my-server
 This will find and delete the "my-server" entry from the `mcpServers` object in
 the appropriate `settings.json` file based on the scope (`-s, --scope`).
 
+### Enabling/disabling a server (`gemini mcp enable`, `gemini mcp disable`)
+
+Temporarily disable an MCP server without removing its configuration, or
+re-enable a previously disabled server.
+
+**Commands:**
+
+```bash
+gemini mcp enable <name> [--session]
+gemini mcp disable <name> [--session]
+```
+
+**Options (flags):**
+
+- `--session`: Apply change only for this session (not persisted to file).
+
+Disabled servers appear in `/mcp` status as "Disabled" but won't connect or
+provide tools. Enablement state is stored in
+`~/.gemini/mcp-server-enablement.json`.
+
+The same commands are available as slash commands during an active session:
+`/mcp enable <name>` and `/mcp disable <name>`.
+
 ## Instructions
 
 Gemini CLI supports

docs/troubleshooting.md

@@ -34,9 +34,6 @@ topics on:
     list of supported locations, see the following pages:
     - Gemini Code Assist for individuals:
       [Available locations](https://developers.google.com/gemini-code-assist/resources/available-locations#americas)
-    - Google AI Pro and Ultra where Gemini Code Assist (and Gemini CLI) is also
-      available:
-      [Available locations](https://developers.google.com/gemini-code-assist/resources/locations-pro-ultra)
 
 - **Error: `Failed to login. Message: Request contains an invalid argument`**
   - **Cause:** Users with Google Workspace accounts or Google Cloud accounts

esbuild.config.js

@@ -14,8 +14,8 @@ let esbuild;
 try {
   esbuild = (await import('esbuild')).default;
 } catch (_error) {
-  console.warn('esbuild not available, skipping bundle step');
-  process.exit(0);
+  console.error('esbuild not available - cannot build bundle');
+  process.exit(1);
 }
 
 const __filename = fileURLToPath(import.meta.url);

evals/README.md

@@ -144,6 +144,48 @@ A significant drop in the pass rate for a `USUALLY_PASSES` test—even if it
 doesn't drop to 0%—often indicates that a recent change to a system prompt or
 tool definition has made the model's behavior less reliable.
 
-You may be able to investigate the regression using Gemini CLI by giving it the
-link to the runs before and after the change and the name of the test and asking
-it to investigate what changes may have impacted the test.
+## Fixing Evaluations
+
+If an evaluation is failing or has a regressed pass rate, you can use the
+`/fix-behavioral-eval` command within Gemini CLI to help investigate and fix the
+issue.
+
+### `/fix-behavioral-eval`
+
+This command is designed to automate the investigation and fixing process for
+failing evaluations. It will:
+
+1.  **Investigate**: Fetch the latest results from the nightly workflow using
+    the `gh` CLI, identify the failing test, and review test trajectory logs in
+    `evals/logs`.
+2.  **Fix**: Suggest and apply targeted fixes to the prompt or tool definitions.
+    It prioritizes minimal changes to `prompt.ts`, tool instructions, and
+    modules that contribute to the prompt. It generally tries to avoid changing
+    the test itself.
+3.  **Verify**: Re-run the test 3 times across multiple models (e.g., Gemini
+    3.0, Gemini 3 Flash, Gemini 2.5 Pro) to ensure stability and calculate a
+    success rate.
+4.  **Report**: Provide a summary of the success rate for each model and details
+    on the applied fixes.
+
+To use it, run:
+
+```bash
+gemini /fix-behavioral-eval
+```
+
+You can also provide a link to a specific GitHub Action run or the name of a
+specific test to focus the investigation:
+
+```bash
+gemini /fix-behavioral-eval https://github.com/google-gemini/gemini-cli/actions/runs/123456789
+```
+
+When investigating failures manually, you can also enable verbose agent logs by
+setting the `GEMINI_DEBUG_LOG_FILE` environment variable.
+
+It's highly recommended to manually review and/or ask the agent to iterate on
+any prompt changes, even if they pass all evals. The prompt should prefer
+positive traits ('do X') and resort to negative traits ('do not do X') only when
+unable to accomplish the goal with positive traits. Gemini is quite good at
+instrospecting on its prompt when asked the right questions.

evals/answer-vs-act.eval.ts

@@ -0,0 +1,156 @@
+/**
+ * @license
+ * Copyright 2026 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { describe, expect } from 'vitest';
+import { evalTest } from './test-helper.js';
+import { EDIT_TOOL_NAMES } from '@google/gemini-cli-core';
+
+const FILES = {
+  'app.ts': 'const add = (a: number, b: number) => a - b;',
+  'package.json': '{"name": "test-app", "version": "1.0.0"}',
+} as const;
+
+describe('Answer vs. ask eval', () => {
+  /**
+   * Ensures that when the user asks to "inspect" for bugs, the agent does NOT
+   * automatically modify the file, but instead asks for permission.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not edit files when asked to inspect for bugs',
+    prompt: 'Inspect app.ts for bugs',
+    files: FILES,
+    assert: async (rig, result) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify NO edit tools called
+      const editCalls = toolLogs.filter((log) =>
+        EDIT_TOOL_NAMES.has(log.toolRequest.name),
+      );
+      expect(editCalls.length).toBe(0);
+
+      // Verify file unchanged
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a - b');
+    },
+  });
+
+  /**
+   * Ensures that when the user explicitly asks to "fix" a bug, the agent
+   * does modify the file.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should edit files when asked to fix bug',
+    prompt: 'Fix the bug in app.ts - it should add numbers not subtract',
+    files: FILES,
+    assert: async (rig) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify edit tools WERE called
+      const editCalls = toolLogs.filter(
+        (log) =>
+          EDIT_TOOL_NAMES.has(log.toolRequest.name) && log.toolRequest.success,
+      );
+      expect(editCalls.length).toBeGreaterThanOrEqual(1);
+
+      // Verify file changed
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a + b');
+    },
+  });
+
+  /**
+   * Ensures that when the user asks "any bugs?" the agent does NOT
+   * automatically modify the file, but instead asks for permission.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not edit when asking "any bugs"',
+    prompt: 'Any bugs in app.ts?',
+    files: FILES,
+    assert: async (rig) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify NO edit tools called
+      const editCalls = toolLogs.filter((log) =>
+        EDIT_TOOL_NAMES.has(log.toolRequest.name),
+      );
+      expect(editCalls.length).toBe(0);
+
+      // Verify file unchanged
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a - b');
+    },
+  });
+
+  /**
+   * Ensures that when the user asks a general question, the agent does NOT
+   * automatically modify the file.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not edit files when asked a general question',
+    prompt: 'How does app.ts work?',
+    files: FILES,
+    assert: async (rig) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify NO edit tools called
+      const editCalls = toolLogs.filter((log) =>
+        EDIT_TOOL_NAMES.has(log.toolRequest.name),
+      );
+      expect(editCalls.length).toBe(0);
+
+      // Verify file unchanged
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a - b');
+    },
+  });
+
+  /**
+   * Ensures that when the user asks a question about style, the agent does NOT
+   * automatically modify the file.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not edit files when asked about style',
+    prompt: 'Is app.ts following good style?',
+    files: FILES,
+    assert: async (rig, result) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify NO edit tools called
+      const editCalls = toolLogs.filter((log) =>
+        EDIT_TOOL_NAMES.has(log.toolRequest.name),
+      );
+      expect(editCalls.length).toBe(0);
+
+      // Verify file unchanged
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a - b');
+    },
+  });
+
+  /**
+   * Ensures that when the user points out an issue but doesn't ask for a fix,
+   * the agent does NOT automatically modify the file.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not edit files when user notes an issue',
+    prompt: 'The add function subtracts numbers.',
+    files: FILES,
+    params: { timeout: 20000 }, // 20s timeout
+    assert: async (rig) => {
+      const toolLogs = rig.readToolLogs();
+
+      // Verify NO edit tools called
+      const editCalls = toolLogs.filter((log) =>
+        EDIT_TOOL_NAMES.has(log.toolRequest.name),
+      );
+      expect(editCalls.length).toBe(0);
+
+      // Verify file unchanged
+      const content = rig.readFile('app.ts');
+      expect(content).toContain('a - b');
+    },
+  });
+});

evals/automated-tool-use.eval.ts

@@ -0,0 +1,170 @@
+/**
+ * @license
+ * Copyright 2026 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { describe, expect } from 'vitest';
+import { evalTest } from './test-helper.js';
+
+describe('Automated tool use', () => {
+  /**
+   * Tests that the agent always utilizes --fix when calling eslint.
+   * We provide a 'lint' script in the package.json, which helps elicit
+   * a repro by guiding the agent into using the existing deficient script.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should use automated tools (eslint --fix) to fix code style issues',
+    files: {
+      'package.json': JSON.stringify(
+        {
+          name: 'typescript-project',
+          version: '1.0.0',
+          type: 'module',
+          scripts: {
+            lint: 'eslint .',
+          },
+          devDependencies: {
+            eslint: '^9.0.0',
+            globals: '^15.0.0',
+            typescript: '^5.0.0',
+            'typescript-eslint': '^8.0.0',
+            '@eslint/js': '^9.0.0',
+          },
+        },
+        null,
+        2,
+      ),
+      'eslint.config.js': `
+        import globals from "globals";
+        import pluginJs from "@eslint/js";
+        import tseslint from "typescript-eslint";
+
+        export default [
+          {
+            files: ["**/*.{js,mjs,cjs,ts}"], 
+            languageOptions: { 
+                globals: globals.node 
+            }
+          },
+          pluginJs.configs.recommended,
+          ...tseslint.configs.recommended,
+          {
+            rules: {
+                "prefer-const": "error",
+                "@typescript-eslint/no-unused-vars": "off"
+            }
+          }
+        ];
+      `,
+      'src/app.ts': `
+        export function main() {
+            let count = 10;
+            console.log(count);
+        }
+      `,
+    },
+    prompt:
+      'Fix the linter errors in this project. Make sure to avoid interactive commands.',
+    assert: async (rig) => {
+      // Check if run_shell_command was used with --fix
+      const toolCalls = rig.readToolLogs();
+      const shellCommands = toolCalls.filter(
+        (call) => call.toolRequest.name === 'run_shell_command',
+      );
+
+      const hasFixCommand = shellCommands.some((call) => {
+        let args = call.toolRequest.args;
+        if (typeof args === 'string') {
+          try {
+            args = JSON.parse(args);
+          } catch (e) {
+            return false;
+          }
+        }
+        const cmd = (args as any)['command'];
+        return (
+          cmd &&
+          (cmd.includes('eslint') || cmd.includes('npm run lint')) &&
+          cmd.includes('--fix')
+        );
+      });
+
+      expect(
+        hasFixCommand,
+        'Expected agent to use eslint --fix via run_shell_command',
+      ).toBe(true);
+    },
+  });
+
+  /**
+   * Tests that the agent uses prettier --write to fix formatting issues in files
+   * instead of trying to edit the files itself.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should use automated tools (prettier --write) to fix formatting issues',
+    files: {
+      'package.json': JSON.stringify(
+        {
+          name: 'typescript-project',
+          version: '1.0.0',
+          type: 'module',
+          scripts: {},
+          devDependencies: {
+            prettier: '^3.0.0',
+            typescript: '^5.0.0',
+          },
+        },
+        null,
+        2,
+      ),
+      '.prettierrc': JSON.stringify(
+        {
+          semi: true,
+          singleQuote: true,
+        },
+        null,
+        2,
+      ),
+      'src/app.ts': `
+export function main() {
+    const data={   name:'test',
+      val:123
+    }
+console.log(data)
+}
+`,
+    },
+    prompt:
+      'Fix the formatting errors in this project. Make sure to avoid interactive commands.',
+    assert: async (rig) => {
+      // Check if run_shell_command was used with --write
+      const toolCalls = rig.readToolLogs();
+      const shellCommands = toolCalls.filter(
+        (call) => call.toolRequest.name === 'run_shell_command',
+      );
+
+      const hasFixCommand = shellCommands.some((call) => {
+        let args = call.toolRequest.args;
+        if (typeof args === 'string') {
+          try {
+            args = JSON.parse(args);
+          } catch (e) {
+            return false;
+          }
+        }
+        const cmd = (args as any)['command'];
+        return (
+          cmd &&
+          cmd.includes('prettier') &&
+          (cmd.includes('--write') || cmd.includes('-w'))
+        );
+      });
+
+      expect(
+        hasFixCommand,
+        'Expected agent to use prettier --write via run_shell_command',
+      ).toBe(true);
+    },
+  });
+});

evals/generalist_agent.eval.ts

@@ -10,7 +10,7 @@ import path from 'node:path';
 import fs from 'node:fs/promises';
 
 describe('generalist_agent', () => {
-  evalTest('ALWAYS_PASSES', {
+  evalTest('USUALLY_PASSES', {
     name: 'should be able to use generalist agent by explicitly asking the main agent to invoke it',
     params: {
       settings: {
@@ -24,18 +24,11 @@ describe('generalist_agent', () => {
     prompt:
       'Please use the generalist agent to create a file called "generalist_test_file.txt" containing exactly the following text: success',
     assert: async (rig) => {
-      // 1) Verify the generalist agent was invoked via delegate_to_agent
-      const foundToolCall = await rig.waitForToolCall(
-        'delegate_to_agent',
-        undefined,
-        (args) => {
-          const parsed = JSON.parse(args);
-          return parsed.agent_name === 'generalist';
-        },
-      );
+      // 1) Verify the generalist agent was invoked
+      const foundToolCall = await rig.waitForToolCall('generalist');
       expect(
         foundToolCall,
-        'Expected to find a delegate_to_agent tool call for generalist agent',
+        'Expected to find a tool call for generalist agent',
       ).toBeTruthy();
 
       // 2) Verify the file was created as expected

evals/interactive-hang.eval.ts

@@ -0,0 +1,47 @@
+import { describe, expect } from 'vitest';
+import { evalTest } from './test-helper.js';
+
+describe('interactive_commands', () => {
+  /**
+   * Validates that the agent does not use interactive commands unprompted.
+   * Interactive commands block the progress of the agent, requiring user
+   * intervention.
+   */
+  evalTest('USUALLY_PASSES', {
+    name: 'should not use interactive commands',
+    prompt: 'Execute tests.',
+    files: {
+      'package.json': JSON.stringify(
+        {
+          name: 'example',
+          type: 'module',
+          devDependencies: {
+            vitest: 'latest',
+          },
+        },
+        null,
+        2,
+      ),
+      'example.test.js': `
+        import { test, expect } from 'vitest';
+        test('it works', () => {
+          expect(1 + 1).toBe(2);
+        });
+      `,
+    },
+    assert: async (rig, result) => {
+      const logs = rig.readToolLogs();
+      const vitestCall = logs.find(
+        (l) =>
+          l.toolRequest.name === 'run_shell_command' &&
+          l.toolRequest.args.toLowerCase().includes('vitest'),
+      );
+
+      expect(vitestCall, 'Agent should have called vitest').toBeDefined();
+      expect(
+        vitestCall?.toolRequest.args,
+        'Agent should have passed run arg',
+      ).toMatch(/\b(run|--run)\b/);
+    },
+  });
+});

evals/subagents.eval.ts

@@ -47,18 +47,7 @@ describe('subagent eval test cases', () => {
       'README.md': 'TODO: update the README.',
     },
     assert: async (rig, _result) => {
-      await rig.expectToolCallSuccess(
-        ['delegate_to_agent'],
-        undefined,
-        (args) => {
-          try {
-            const parsed = JSON.parse(args);
-            return parsed.agent_name === 'docs-agent';
-          } catch {
-            return false;
-          }
-        },
-      );
+      await rig.expectToolCallSuccess(['docs-agent']);
     },
   });
 });

evals/test-helper.ts

@@ -7,9 +7,13 @@
 import { it } from 'vitest';
 import fs from 'node:fs';
 import path from 'node:path';
+import crypto from 'node:crypto';
 import { execSync } from 'node:child_process';
 import { TestRig } from '@google/gemini-cli-test-utils';
-import { createUnauthorizedToolError } from '@google/gemini-cli-core';
+import {
+  createUnauthorizedToolError,
+  parseAgentMarkdown,
+} from '@google/gemini-cli-core';
 
 export * from '@google/gemini-cli-test-utils';
 
@@ -34,14 +38,71 @@ export type EvalPolicy = 'ALWAYS_PASSES' | 'USUALLY_PASSES';
 export function evalTest(policy: EvalPolicy, evalCase: EvalCase) {
   const fn = async () => {
     const rig = new TestRig();
+    const { logDir, sanitizedName } = await prepareLogDir(evalCase.name);
+    const activityLogFile = path.join(logDir, `${sanitizedName}.jsonl`);
+    const logFile = path.join(logDir, `${sanitizedName}.log`);
+    let isSuccess = false;
     try {
       rig.setup(evalCase.name, evalCase.params);
 
+      // Symlink node modules to reduce the amount of time needed to
+      // bootstrap test projects.
+      const rootNodeModules = path.join(process.cwd(), 'node_modules');
+      const testNodeModules = path.join(rig.testDir || '', 'node_modules');
+      if (fs.existsSync(rootNodeModules)) {
+        fs.symlinkSync(rootNodeModules, testNodeModules, 'dir');
+      }
+
       if (evalCase.files) {
+        const acknowledgedAgents: Record<string, Record<string, string>> = {};
+        const projectRoot = fs.realpathSync(rig.testDir!);
+
         for (const [filePath, content] of Object.entries(evalCase.files)) {
           const fullPath = path.join(rig.testDir!, filePath);
           fs.mkdirSync(path.dirname(fullPath), { recursive: true });
           fs.writeFileSync(fullPath, content);
+
+          // If it's an agent file, calculate hash for acknowledgement
+          if (
+            filePath.startsWith('.gemini/agents/') &&
+            filePath.endsWith('.md')
+          ) {
+            const hash = crypto
+              .createHash('sha256')
+              .update(content)
+              .digest('hex');
+
+            try {
+              const agentDefs = await parseAgentMarkdown(fullPath, content);
+              if (agentDefs.length > 0) {
+                const agentName = agentDefs[0].name;
+                if (!acknowledgedAgents[projectRoot]) {
+                  acknowledgedAgents[projectRoot] = {};
+                }
+                acknowledgedAgents[projectRoot][agentName] = hash;
+              }
+            } catch (error) {
+              console.warn(
+                `Failed to parse agent for test acknowledgement: ${filePath}`,
+                error,
+              );
+            }
+          }
+        }
+
+        // Write acknowledged_agents.json to the home directory
+        if (Object.keys(acknowledgedAgents).length > 0) {
+          const ackPath = path.join(
+            rig.homeDir!,
+            '.gemini',
+            'acknowledgments',
+            'agents.json',
+          );
+          fs.mkdirSync(path.dirname(ackPath), { recursive: true });
+          fs.writeFileSync(
+            ackPath,
+            JSON.stringify(acknowledgedAgents, null, 2),
+          );
         }
 
         const execOptions = { cwd: rig.testDir!, stdio: 'inherit' as const };
@@ -62,6 +123,10 @@ export function evalTest(policy: EvalPolicy, evalCase: EvalCase) {
       const result = await rig.run({
         args: evalCase.prompt,
         approvalMode: evalCase.approvalMode ?? 'yolo',
+        timeout: evalCase.timeout,
+        env: {
+          GEMINI_CLI_ACTIVITY_LOG_FILE: activityLogFile,
+        },
       });
 
       const unauthorizedErrorPrefix =
@@ -73,9 +138,21 @@ export function evalTest(policy: EvalPolicy, evalCase: EvalCase) {
       }
 
       await evalCase.assert(rig, result);
+      isSuccess = true;
     } finally {
-      await logToFile(
-        evalCase.name,
+      if (isSuccess) {
+        await fs.promises.unlink(activityLogFile).catch((err) => {
+          if (err.code !== 'ENOENT') throw err;
+        });
+      }
+
+      if (rig._lastRunStderr) {
+        const stderrFile = path.join(logDir, `${sanitizedName}.stderr.log`);
+        await fs.promises.writeFile(stderrFile, rig._lastRunStderr);
+      }
+
+      await fs.promises.writeFile(
+        logFile,
         JSON.stringify(rig.readToolLogs(), null, 2),
       );
       await rig.cleanup();
@@ -89,19 +166,19 @@ export function evalTest(policy: EvalPolicy, evalCase: EvalCase) {
   }
 }
 
+async function prepareLogDir(name: string) {
+  const logDir = path.resolve(process.cwd(), 'evals/logs');
+  await fs.promises.mkdir(logDir, { recursive: true });
+  const sanitizedName = name.replace(/[^a-z0-9]/gi, '_').toLowerCase();
+  return { logDir, sanitizedName };
+}
+
 export interface EvalCase {
   name: string;
   params?: Record<string, any>;
   prompt: string;
+  timeout?: number;
   files?: Record<string, string>;
   approvalMode?: 'default' | 'auto_edit' | 'yolo' | 'plan';
   assert: (rig: TestRig, result: string) => Promise<void>;
 }
-
-async function logToFile(name: string, content: string) {
-  const logDir = 'evals/logs';
-  await fs.promises.mkdir(logDir, { recursive: true });
-  const sanitizedName = name.replace(/[^a-z0-9]/gi, '_').toLowerCase();
-  const logFile = `${logDir}/${sanitizedName}.log`;
-  await fs.promises.writeFile(logFile, content);
-}

integration-tests/acp-env-auth.test.ts

@@ -0,0 +1,163 @@
+/**
+ * @license
+ * Copyright 2025 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { describe, it, expect, beforeEach, afterEach } from 'vitest';
+import { TestRig } from './test-helper.js';
+import { spawn, ChildProcess } from 'node:child_process';
+import { join, resolve } from 'node:path';
+import { writeFileSync, mkdirSync } from 'node:fs';
+import { Writable, Readable } from 'node:stream';
+import { env } from 'node:process';
+import * as acp from '@agentclientprotocol/sdk';
+
+const sandboxEnv = env['GEMINI_SANDBOX'];
+const itMaybe = sandboxEnv && sandboxEnv !== 'false' ? it.skip : it;
+
+class MockClient implements acp.Client {
+  updates: acp.SessionNotification[] = [];
+  sessionUpdate = async (params: acp.SessionNotification) => {
+    this.updates.push(params);
+  };
+  requestPermission = async (): Promise<acp.RequestPermissionResponse> => {
+    throw new Error('unexpected');
+  };
+}
+
+describe('ACP Environment and Auth', () => {
+  let rig: TestRig;
+  let child: ChildProcess | undefined;
+
+  beforeEach(() => {
+    rig = new TestRig();
+  });
+
+  afterEach(async () => {
+    child?.kill();
+    child = undefined;
+    await rig.cleanup();
+  });
+
+  itMaybe(
+    'should load .env from project directory and use the provided API key',
+    async () => {
+      rig.setup('acp-env-loading');
+
+      // Create a project directory with a .env file containing a recognizable invalid key
+      const projectDir = resolve(join(rig.testDir!, 'project'));
+      mkdirSync(projectDir, { recursive: true });
+      writeFileSync(
+        join(projectDir, '.env'),
+        'GEMINI_API_KEY=test-key-from-env\n',
+      );
+
+      const bundlePath = join(import.meta.dirname, '..', 'bundle/gemini.js');
+
+      child = spawn('node', [bundlePath, '--experimental-acp'], {
+        cwd: rig.homeDir!,
+        stdio: ['pipe', 'pipe', 'inherit'],
+        env: {
+          ...process.env,
+          GEMINI_CLI_HOME: rig.homeDir!,
+          GEMINI_API_KEY: undefined,
+          VERBOSE: 'true',
+        },
+      });
+
+      const input = Writable.toWeb(child.stdin!);
+      const output = Readable.toWeb(
+        child.stdout!,
+      ) as ReadableStream<Uint8Array>;
+      const testClient = new MockClient();
+      const stream = acp.ndJsonStream(input, output);
+      const connection = new acp.ClientSideConnection(() => testClient, stream);
+
+      await connection.initialize({
+        protocolVersion: acp.PROTOCOL_VERSION,
+        clientCapabilities: {
+          fs: { readTextFile: false, writeTextFile: false },
+        },
+      });
+
+      // 1. newSession should succeed because it finds the key in .env
+      const { sessionId } = await connection.newSession({
+        cwd: projectDir,
+        mcpServers: [],
+      });
+
+      expect(sessionId).toBeDefined();
+
+      // 2. prompt should fail because the key is invalid,
+      // but the error should come from the API, not the internal auth check.
+      await expect(
+        connection.prompt({
+          sessionId,
+          prompt: [{ type: 'text', text: 'hello' }],
+        }),
+      ).rejects.toSatisfy((error: unknown) => {
+        const acpError = error as acp.RequestError;
+        const errorData = acpError.data as
+          | { error?: { message?: string } }
+          | undefined;
+        const message = String(errorData?.error?.message || acpError.message);
+        // It should NOT be our internal "Authentication required" message
+        expect(message).not.toContain('Authentication required');
+        // It SHOULD be an API error mentioning the invalid key
+        expect(message).toContain('API key not valid');
+        return true;
+      });
+
+      child.stdin!.end();
+    },
+  );
+
+  itMaybe(
+    'should fail with authRequired when no API key is found',
+    async () => {
+      rig.setup('acp-auth-failure');
+
+      const bundlePath = join(import.meta.dirname, '..', 'bundle/gemini.js');
+
+      child = spawn('node', [bundlePath, '--experimental-acp'], {
+        cwd: rig.homeDir!,
+        stdio: ['pipe', 'pipe', 'inherit'],
+        env: {
+          ...process.env,
+          GEMINI_CLI_HOME: rig.homeDir!,
+          GEMINI_API_KEY: undefined,
+          VERBOSE: 'true',
+        },
+      });
+
+      const input = Writable.toWeb(child.stdin!);
+      const output = Readable.toWeb(
+        child.stdout!,
+      ) as ReadableStream<Uint8Array>;
+      const testClient = new MockClient();
+      const stream = acp.ndJsonStream(input, output);
+      const connection = new acp.ClientSideConnection(() => testClient, stream);
+
+      await connection.initialize({
+        protocolVersion: acp.PROTOCOL_VERSION,
+        clientCapabilities: {
+          fs: { readTextFile: false, writeTextFile: false },
+        },
+      });
+
+      await expect(
+        connection.newSession({
+          cwd: resolve(rig.testDir!),
+          mcpServers: [],
+        }),
+      ).rejects.toMatchObject({
+        message: expect.stringContaining(
+          'Gemini API key is missing or not configured.',
+        ),
+      });
+
+      child.stdin!.end();
+    },
+  );
+});

integration-tests/checkpointing.test.ts

@@ -0,0 +1,155 @@
+/**
+ * @license
+ * Copyright 2025 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { describe, it, expect, beforeEach, afterEach } from 'vitest';
+import * as fs from 'node:fs/promises';
+import * as path from 'node:path';
+import * as os from 'node:os';
+import { GitService, Storage } from '@google/gemini-cli-core';
+
+describe('Checkpointing Integration', () => {
+  let tmpDir: string;
+  let projectRoot: string;
+  let fakeHome: string;
+  let originalEnv: NodeJS.ProcessEnv;
+
+  beforeEach(async () => {
+    tmpDir = await fs.mkdtemp(
+      path.join(os.tmpdir(), 'gemini-checkpoint-test-'),
+    );
+    projectRoot = path.join(tmpDir, 'project');
+    fakeHome = path.join(tmpDir, 'home');
+
+    await fs.mkdir(projectRoot, { recursive: true });
+    await fs.mkdir(fakeHome, { recursive: true });
+
+    // Save original env
+    originalEnv = { ...process.env };
+
+    // Simulate environment with NO global gitconfig
+    process.env['HOME'] = fakeHome;
+    delete process.env['GIT_CONFIG_GLOBAL'];
+    delete process.env['GIT_CONFIG_SYSTEM'];
+  });
+
+  afterEach(async () => {
+    // Restore env
+    process.env = originalEnv;
+
+    // Cleanup
+    try {
+      await fs.rm(tmpDir, { recursive: true, force: true });
+    } catch (e) {
+      console.error('Failed to cleanup temp dir', e);
+    }
+  });
+
+  it('should successfully create and restore snapshots without global git config', async () => {
+    const storage = new Storage(projectRoot);
+    const gitService = new GitService(projectRoot, storage);
+
+    // 1. Initialize
+    await gitService.initialize();
+
+    // Verify system config empty file creation
+    // We need to access getHistoryDir logic or replicate it.
+    // Since we don't have access to private getHistoryDir, we can infer it or just trust the functional test.
+
+    // 2. Create initial state
+    await fs.writeFile(path.join(projectRoot, 'file1.txt'), 'version 1');
+    await fs.writeFile(path.join(projectRoot, 'file2.txt'), 'permanent file');
+
+    // 3. Create Snapshot
+    const snapshotHash = await gitService.createFileSnapshot('Checkpoint 1');
+    expect(snapshotHash).toBeDefined();
+
+    // 4. Modify files
+    await fs.writeFile(
+      path.join(projectRoot, 'file1.txt'),
+      'version 2 (BAD CHANGE)',
+    );
+    await fs.writeFile(
+      path.join(projectRoot, 'file3.txt'),
+      'new file (SHOULD BE GONE)',
+    );
+    await fs.rm(path.join(projectRoot, 'file2.txt'));
+
+    // 5. Restore
+    await gitService.restoreProjectFromSnapshot(snapshotHash);
+
+    // 6. Verify state
+    const file1Content = await fs.readFile(
+      path.join(projectRoot, 'file1.txt'),
+      'utf-8',
+    );
+    expect(file1Content).toBe('version 1');
+
+    const file2Exists = await fs
+      .stat(path.join(projectRoot, 'file2.txt'))
+      .then(() => true)
+      .catch(() => false);
+    expect(file2Exists).toBe(true);
+    const file2Content = await fs.readFile(
+      path.join(projectRoot, 'file2.txt'),
+      'utf-8',
+    );
+    expect(file2Content).toBe('permanent file');
+
+    const file3Exists = await fs
+      .stat(path.join(projectRoot, 'file3.txt'))
+      .then(() => true)
+      .catch(() => false);
+    expect(file3Exists).toBe(false);
+  });
+
+  it('should ignore user global git config and use isolated identity', async () => {
+    // 1. Create a fake global gitconfig with a specific user
+    const globalConfigPath = path.join(fakeHome, '.gitconfig');
+    const globalConfigContent = `[user]
+  name = Global User
+  email = global@example.com
+`;
+    await fs.writeFile(globalConfigPath, globalConfigContent);
+
+    // Point HOME to fakeHome so git picks up this global config (if we didn't isolate it)
+    process.env['HOME'] = fakeHome;
+    // Ensure GIT_CONFIG_GLOBAL is NOT set for the process initially,
+    // so it would default to HOME/.gitconfig if GitService didn't override it.
+    delete process.env['GIT_CONFIG_GLOBAL'];
+
+    const storage = new Storage(projectRoot);
+    const gitService = new GitService(projectRoot, storage);
+
+    await gitService.initialize();
+
+    // 2. Create a file and snapshot
+    await fs.writeFile(path.join(projectRoot, 'test.txt'), 'content');
+    await gitService.createFileSnapshot('Snapshot with global config present');
+
+    // 3. Verify the commit author in the shadow repo
+    const historyDir = storage.getHistoryDir();
+
+    const { execFileSync } = await import('node:child_process');
+
+    const logOutput = execFileSync(
+      'git',
+      ['log', '-1', '--pretty=format:%an <%ae>'],
+      {
+        cwd: historyDir,
+        env: {
+          ...process.env,
+          GIT_DIR: path.join(historyDir, '.git'),
+          GIT_CONFIG_GLOBAL: path.join(historyDir, '.gitconfig'),
+          GIT_CONFIG_SYSTEM: path.join(historyDir, '.gitconfig_system_empty'),
+        },
+        encoding: 'utf-8',
+      },
+    );
+
+    expect(logOutput).toBe('Gemini CLI <gemini-cli@google.com>');
+    expect(logOutput).not.toContain('Global User');
+  });
+});

integration-tests/globalSetup.ts

@@ -13,6 +13,7 @@ import { mkdir, readdir, rm } from 'node:fs/promises';
 import { join, dirname } from 'node:path';
 import { fileURLToPath } from 'node:url';
 import { canUseRipgrep } from '../packages/core/src/tools/ripGrep.js';
+import { disableMouseTracking } from '@google/gemini-cli-core';
 
 const __dirname = dirname(fileURLToPath(import.meta.url));
 const rootDir = join(__dirname, '..');
@@ -72,6 +73,11 @@ export async function setup() {
 }
 
 export async function teardown() {
+  // Disable mouse tracking
+  if (process.stdout.isTTY) {
+    disableMouseTracking();
+  }
+
   // Cleanup the test run directory unless KEEP_OUTPUT is set
   if (process.env['KEEP_OUTPUT'] !== 'true' && runDir) {
     try {

integration-tests/hooks-agent-flow.test.ts

@@ -155,6 +155,84 @@ describe('Hooks Agent Flow', () => {
       // The fake response contains "Hello World"
       expect(afterAgentLog?.hookCall.stdout).toContain('Hello World');
     });
+
+    it('should process clearContext in AfterAgent hook output', async () => {
+      await rig.setup('should process clearContext in AfterAgent hook output', {
+        fakeResponsesPath: join(
+          import.meta.dirname,
+          'hooks-system.after-agent.responses',
+        ),
+      });
+
+      // BeforeModel hook to track message counts across LLM calls
+      const messageCountFile = join(rig.testDir!, 'message-counts.json');
+      const beforeModelScript = `
+        const fs = require('fs');
+        const input = JSON.parse(fs.readFileSync(0, 'utf-8'));
+        const messageCount = input.llm_request?.contents?.length || 0;
+        let counts = [];
+        try { counts = JSON.parse(fs.readFileSync('${messageCountFile}', 'utf-8')); } catch (e) {}
+        counts.push(messageCount);
+        fs.writeFileSync('${messageCountFile}', JSON.stringify(counts));
+        console.log(JSON.stringify({ decision: 'allow' }));
+      `;
+      const beforeModelScriptPath = join(
+        rig.testDir!,
+        'before_model_counter.cjs',
+      );
+      writeFileSync(beforeModelScriptPath, beforeModelScript);
+
+      await rig.setup('should process clearContext in AfterAgent hook output', {
+        settings: {
+          hooks: {
+            enabled: true,
+            BeforeModel: [
+              {
+                hooks: [
+                  {
+                    type: 'command',
+                    command: `node "${beforeModelScriptPath}"`,
+                    timeout: 5000,
+                  },
+                ],
+              },
+            ],
+            AfterAgent: [
+              {
+                hooks: [
+                  {
+                    type: 'command',
+                    command: `node -e "console.log(JSON.stringify({decision: 'block', reason: 'Security policy triggered', hookSpecificOutput: {hookEventName: 'AfterAgent', clearContext: true}}))"`,
+                    timeout: 5000,
+                  },
+                ],
+              },
+            ],
+          },
+        },
+      });
+
+      const result = await rig.run({ args: 'Hello test' });
+
+      const hookTelemetryFound = await rig.waitForTelemetryEvent('hook_call');
+      expect(hookTelemetryFound).toBeTruthy();
+
+      const hookLogs = rig.readHookLogs();
+      const afterAgentLog = hookLogs.find(
+        (log) => log.hookCall.hook_event_name === 'AfterAgent',
+      );
+
+      expect(afterAgentLog).toBeDefined();
+      expect(afterAgentLog?.hookCall.stdout).toContain('clearContext');
+      expect(afterAgentLog?.hookCall.stdout).toContain('true');
+      expect(result).toContain('Security policy triggered');
+
+      // Verify context was cleared: second call should not have more messages than first
+      const countsRaw = rig.readFile('message-counts.json');
+      const counts = JSON.parse(countsRaw) as number[];
+      expect(counts.length).toBeGreaterThanOrEqual(2);
+      expect(counts[1]).toBeLessThanOrEqual(counts[0]);
+    });
   });
 
   describe('Multi-step Loops', () => {

integration-tests/hooks-system.test.ts

@@ -484,9 +484,19 @@ console.log(JSON.stringify({
           'hooks-system.before-tool-selection.responses',
         ),
       });
-      // Create inline hook command (works on both Unix and Windows)
-      const hookCommand =
-        "node -e \"console.log(JSON.stringify({hookSpecificOutput: {hookEventName: 'BeforeToolSelection', toolConfig: {mode: 'ANY', allowedFunctionNames: ['read_file', 'run_shell_command']}}}))\"";
+
+      // Write hook script to file (inline node -e has quoting issues on Windows)
+      const hookScript = `console.log(JSON.stringify({
+  hookSpecificOutput: {
+    hookEventName: 'BeforeToolSelection',
+    toolConfig: {
+      mode: 'ANY',
+      allowedFunctionNames: ['read_file', 'run_shell_command']
+    }
+  }
+}));`;
+      const scriptPath = join(rig.testDir!, 'before_tool_selection_hook.cjs');
+      writeFileSync(scriptPath, hookScript);
 
       rig.setup('should modify tool selection with BeforeToolSelection hooks', {
         settings: {
@@ -500,7 +510,7 @@ console.log(JSON.stringify({
                 hooks: [
                   {
                     type: 'command',
-                    command: hookCommand,
+                    command: `node "${scriptPath.replace(/\\/g, '/')}"`,
                     timeout: 5000,
                   },
                 ],

integration-tests/ripgrep-real.test.ts

@@ -28,9 +28,25 @@ class MockConfig {
     return true;
   }
 
+  getFileFilteringRespectGitIgnore() {
+    return true;
+  }
+
   getFileFilteringRespectGeminiIgnore() {
     return true;
   }
+
+  getFileFilteringOptions() {
+    return {
+      respectGitIgnore: true,
+      respectGeminiIgnore: true,
+      customIgnoreFilePaths: [],
+    };
+  }
+
+  validatePathAccess() {
+    return null;
+  }
 }
 
 describe('ripgrep-real-direct', () => {

integration-tests/run_shell_command.test.ts

@@ -564,11 +564,17 @@ describe('run_shell_command', () => {
 
   it('rejects invalid shell expressions', async () => {
     await rig.setup('rejects invalid shell expressions', {
-      settings: { tools: { core: ['run_shell_command'] } },
+      settings: {
+        tools: {
+          core: ['run_shell_command'],
+          allowed: ['run_shell_command(echo)'], // Specifically allow echo
+        },
+      },
     });
     const invalidCommand = getInvalidCommand();
     const result = await rig.run({
       args: `I am testing the error handling of the run_shell_command tool. Please attempt to run the following command, which I know has invalid syntax: \`${invalidCommand}\`. If the command fails as expected, please return the word FAIL, otherwise return the word SUCCESS.`,
+      approvalMode: 'default', // Use default mode so safety fallback triggers confirmation
     });
     expect(result).toContain('FAIL');
 

integration-tests/stdout-stderr-output-error.responses

@@ -0,0 +1 @@
+{"method":"generateContentStream","response":[{"candidates":[{"content":{"parts":[{"text":"I could not find the file `nonexistent-file-that-does-not-exist.txt` in the current directory or its subdirectories. Please verify the file path or name."}],"role":"model"},"finishReason":"STOP","index":0}],"usageMetadata":{"promptTokenCount":10,"candidatesTokenCount":25,"totalTokenCount":35,"promptTokensDetails":[{"modality":"TEXT","tokenCount":10}]}}]}

integration-tests/stdout-stderr-output.responses

@@ -0,0 +1 @@
+{"method":"generateContentStream","response":[{"candidates":[{"content":{"parts":[{"text":"Hello! How can I help you today?"}],"role":"model"},"finishReason":"STOP","index":0}],"usageMetadata":{"promptTokenCount":5,"candidatesTokenCount":9,"totalTokenCount":14,"promptTokensDetails":[{"modality":"TEXT","tokenCount":5}]}}]}

integration-tests/stdout-stderr-output.test.ts

@@ -0,0 +1,62 @@
+/**
+ * @license
+ * Copyright 2025 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { describe, it, expect, beforeEach, afterEach } from 'vitest';
+import { join } from 'node:path';
+import { TestRig } from './test-helper.js';
+
+describe('stdout-stderr-output', () => {
+  let rig: TestRig;
+
+  beforeEach(() => {
+    rig = new TestRig();
+  });
+
+  afterEach(async () => {
+    await rig.cleanup();
+  });
+
+  it('should send model response to stdout and app messages to stderr', async ({
+    signal,
+  }) => {
+    await rig.setup('prompt-output-test', {
+      fakeResponsesPath: join(
+        import.meta.dirname,
+        'stdout-stderr-output.responses',
+      ),
+    });
+
+    const { stdout, exitCode } = await rig.runWithStreams(['-p', 'Say hello'], {
+      signal,
+    });
+
+    expect(exitCode).toBe(0);
+    expect(stdout.toLowerCase()).toContain('hello');
+    expect(stdout).not.toMatch(/^\[ERROR\]/m);
+    expect(stdout).not.toMatch(/^\[INFO\]/m);
+  });
+
+  it('should handle missing file with message to stdout and error to stderr', async ({
+    signal,
+  }) => {
+    await rig.setup('error-output-test', {
+      fakeResponsesPath: join(
+        import.meta.dirname,
+        'stdout-stderr-output-error.responses',
+      ),
+    });
+
+    const { stdout, exitCode } = await rig.runWithStreams(
+      ['-p', '@nonexistent-file-that-does-not-exist.txt explain this'],
+      { signal },
+    );
+
+    expect(exitCode).toBe(0);
+    expect(stdout.toLowerCase()).toMatch(
+      /could not find|not exist|does not exist/,
+    );
+  });
+});

package.json

@@ -1,6 +1,6 @@
 {
   "name": "@google/gemini-cli",
-  "version": "0.27.0-nightly.20260121.97aac696f",
+  "version": "0.29.0-nightly.20260203.71f46f116",
   "engines": {
     "node": ">=20.0.0"
   },
@@ -14,7 +14,7 @@
     "url": "git+https://github.com/google-gemini/gemini-cli.git"
   },
   "config": {
-    "sandboxImageUri": "us-docker.pkg.dev/gemini-code-dev/gemini-cli/sandbox:0.27.0-nightly.20260121.97aac696f"
+    "sandboxImageUri": "us-docker.pkg.dev/gemini-code-dev/gemini-cli/sandbox:0.29.0-nightly.20260203.71f46f116"
   },
   "scripts": {
     "start": "cross-env NODE_ENV=development node scripts/start.js",
@@ -64,7 +64,7 @@
     "pre-commit": "node scripts/pre-commit.js"
   },
   "overrides": {
-    "ink": "npm:@jrichman/ink@6.4.7",
+    "ink": "npm:@jrichman/ink@6.4.8",
     "wrap-ansi": "9.0.2",
     "cliui": {
       "wrap-ansi": "7.0.0"
@@ -124,7 +124,7 @@
     "yargs": "^17.7.2"
   },
   "dependencies": {
-    "ink": "npm:@jrichman/ink@6.4.7",
+    "ink": "npm:@jrichman/ink@6.4.8",
     "latest-version": "^9.0.0",
     "simple-git": "^3.28.0"
   },

packages/a2a-server/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@google/gemini-cli-a2a-server",
-  "version": "0.27.0-nightly.20260121.97aac696f",
+  "version": "0.29.0-nightly.20260203.71f46f116",
   "description": "Gemini CLI A2A Server",
   "repository": {
     "type": "git",

packages/a2a-server/src/commands/init.test.ts

@@ -26,10 +26,14 @@ vi.mock('@google/gemini-cli-core', async (importOriginal) => {
   };
 });
 
-vi.mock('node:fs', () => ({
-  existsSync: vi.fn(),
-  writeFileSync: vi.fn(),
-}));
+vi.mock('node:fs', async (importOriginal) => {
+  const actual = await importOriginal<typeof import('node:fs')>();
+  return {
+    ...actual,
+    existsSync: vi.fn(),
+    writeFileSync: vi.fn(),
+  };
+});
 
 vi.mock('../agent/executor.js', () => ({
   CoderAgentExecutor: vi.fn().mockImplementation(() => ({

packages/a2a-server/src/config/config.test.ts

@@ -5,106 +5,264 @@
  */
 
 import { describe, it, expect, vi, beforeEach, afterEach } from 'vitest';
+import * as path from 'node:path';
 import { loadConfig } from './config.js';
-import type { ExtensionLoader } from '@google/gemini-cli-core';
 import type { Settings } from './settings.js';
+import {
+  type ExtensionLoader,
+  FileDiscoveryService,
+  getCodeAssistServer,
+  Config,
+  ExperimentFlags,
+  fetchAdminControlsOnce,
+  type FetchAdminControlsResponse,
+} from '@google/gemini-cli-core';
 
-const {
-  mockLoadServerHierarchicalMemory,
-  mockConfigConstructor,
-  mockVerifyGitAvailability,
-} = vi.hoisted(() => ({
-  mockLoadServerHierarchicalMemory: vi.fn().mockResolvedValue({
-    memoryContent: '',
-    fileCount: 0,
-    filePaths: [],
-  }),
-  mockConfigConstructor: vi.fn(),
-  mockVerifyGitAvailability: vi.fn(),
-}));
+// Mock dependencies
+vi.mock('@google/gemini-cli-core', async (importOriginal) => {
+  const actual =
+    await importOriginal<typeof import('@google/gemini-cli-core')>();
+  return {
+    ...actual,
+    Config: vi.fn().mockImplementation((params) => {
+      const mockConfig = {
+        ...params,
+        initialize: vi.fn(),
+        refreshAuth: vi.fn(),
+        getExperiments: vi.fn().mockReturnValue({
+          flags: {
+            [actual.ExperimentFlags.ENABLE_ADMIN_CONTROLS]: {
+              boolValue: false,
+            },
+          },
+        }),
+        getRemoteAdminSettings: vi.fn(),
+        setRemoteAdminSettings: vi.fn(),
+      };
+      return mockConfig;
+    }),
+    loadServerHierarchicalMemory: vi
+      .fn()
+      .mockResolvedValue({ memoryContent: '', fileCount: 0, filePaths: [] }),
+    startupProfiler: {
+      flush: vi.fn(),
+    },
+    FileDiscoveryService: vi.fn(),
+    getCodeAssistServer: vi.fn(),
+    fetchAdminControlsOnce: vi.fn(),
+    coreEvents: {
+      emitAdminSettingsChanged: vi.fn(),
+    },
+  };
+});
 
-vi.mock('@google/gemini-cli-core', async () => ({
-  Config: class MockConfig {
-    constructor(params: unknown) {
-      mockConfigConstructor(params);
-    }
-    initialize = vi.fn();
-    refreshAuth = vi.fn();
-  },
-  loadServerHierarchicalMemory: mockLoadServerHierarchicalMemory,
-  startupProfiler: {
-    flush: vi.fn(),
-  },
-  FileDiscoveryService: vi.fn(),
-  ApprovalMode: { DEFAULT: 'default', YOLO: 'yolo' },
-  AuthType: {
-    LOGIN_WITH_GOOGLE: 'login_with_google',
-    USE_GEMINI: 'use_gemini',
-  },
-  GEMINI_DIR: '.gemini',
-  DEFAULT_GEMINI_EMBEDDING_MODEL: 'models/embedding-001',
-  DEFAULT_GEMINI_MODEL: 'models/gemini-1.5-flash',
-  PREVIEW_GEMINI_MODEL: 'models/gemini-1.5-pro-latest',
-  homedir: () => '/tmp',
-  GitService: {
-    verifyGitAvailability: mockVerifyGitAvailability,
+vi.mock('../utils/logger.js', () => ({
+  logger: {
+    info: vi.fn(),
+    error: vi.fn(),
   },
 }));
 
 describe('loadConfig', () => {
-  const mockSettings = {
-    checkpointing: { enabled: true },
-  };
-  const mockExtensionLoader = {
-    start: vi.fn(),
-    getExtensions: vi.fn().mockReturnValue([]),
-  } as unknown as ExtensionLoader;
+  const mockSettings = {} as Settings;
+  const mockExtensionLoader = {} as ExtensionLoader;
+  const taskId = 'test-task-id';
 
   beforeEach(() => {
-    vi.resetAllMocks();
+    vi.clearAllMocks();
     process.env['GEMINI_API_KEY'] = 'test-key';
-    // Reset the mock return value just in case
-    mockLoadServerHierarchicalMemory.mockResolvedValue({
-      memoryContent: '',
-      fileCount: 0,
-      filePaths: [],
-    });
   });
 
   afterEach(() => {
+    delete process.env['CUSTOM_IGNORE_FILE_PATHS'];
     delete process.env['GEMINI_API_KEY'];
-    delete process.env['CHECKPOINTING'];
   });
 
-  it('should disable checkpointing if git is not installed', async () => {
-    mockVerifyGitAvailability.mockResolvedValue(false);
+  describe('admin settings overrides', () => {
+    it('should not fetch admin controls if experiment is disabled', async () => {
+      await loadConfig(mockSettings, mockExtensionLoader, taskId);
+      expect(fetchAdminControlsOnce).not.toHaveBeenCalled();
+    });
 
-    await loadConfig(
-      mockSettings as unknown as Settings,
-      mockExtensionLoader,
-      'test-task',
-    );
+    describe('when admin controls experiment is enabled', () => {
+      beforeEach(() => {
+        // We need to cast to any here to modify the mock implementation
+        // eslint-disable-next-line @typescript-eslint/no-explicit-any
+        (Config as any).mockImplementation((params: unknown) => {
+          const mockConfig = {
+            ...(params as object),
+            initialize: vi.fn(),
+            refreshAuth: vi.fn(),
+            getExperiments: vi.fn().mockReturnValue({
+              flags: {
+                [ExperimentFlags.ENABLE_ADMIN_CONTROLS]: {
+                  boolValue: true,
+                },
+              },
+            }),
+            getRemoteAdminSettings: vi.fn().mockReturnValue({}),
+            setRemoteAdminSettings: vi.fn(),
+          };
+          return mockConfig;
+        });
+      });
 
-    expect(mockConfigConstructor).toHaveBeenCalledWith(
-      expect.objectContaining({
-        checkpointing: false,
-      }),
-    );
+      it('should fetch admin controls and apply them', async () => {
+        const mockAdminSettings: FetchAdminControlsResponse = {
+          mcpSetting: {
+            mcpEnabled: false,
+          },
+          cliFeatureSetting: {
+            extensionsSetting: {
+              extensionsEnabled: false,
+            },
+          },
+          strictModeDisabled: false,
+        };
+        vi.mocked(fetchAdminControlsOnce).mockResolvedValue(mockAdminSettings);
+
+        await loadConfig(mockSettings, mockExtensionLoader, taskId);
+
+        expect(Config).toHaveBeenLastCalledWith(
+          expect.objectContaining({
+            disableYoloMode: !mockAdminSettings.strictModeDisabled,
+            mcpEnabled: mockAdminSettings.mcpSetting?.mcpEnabled,
+            extensionsEnabled:
+              mockAdminSettings.cliFeatureSetting?.extensionsSetting
+                ?.extensionsEnabled,
+          }),
+        );
+      });
+
+      it('should treat unset admin settings as false when admin settings are passed', async () => {
+        const mockAdminSettings: FetchAdminControlsResponse = {
+          mcpSetting: {
+            mcpEnabled: true,
+          },
+        };
+        vi.mocked(fetchAdminControlsOnce).mockResolvedValue(mockAdminSettings);
+
+        await loadConfig(mockSettings, mockExtensionLoader, taskId);
+
+        expect(Config).toHaveBeenLastCalledWith(
+          expect.objectContaining({
+            disableYoloMode: !false,
+            mcpEnabled: mockAdminSettings.mcpSetting?.mcpEnabled,
+            extensionsEnabled: undefined,
+          }),
+        );
+      });
+
+      it('should not pass default unset admin settings when no admin settings are present', async () => {
+        const mockAdminSettings: FetchAdminControlsResponse = {};
+        vi.mocked(fetchAdminControlsOnce).mockResolvedValue(mockAdminSettings);
+
+        await loadConfig(mockSettings, mockExtensionLoader, taskId);
+
+        expect(Config).toHaveBeenLastCalledWith(expect.objectContaining({}));
+      });
+
+      it('should fetch admin controls using the code assist server when available', async () => {
+        const mockAdminSettings: FetchAdminControlsResponse = {
+          mcpSetting: {
+            mcpEnabled: true,
+          },
+          strictModeDisabled: true,
+        };
+        const mockCodeAssistServer = { projectId: 'test-project' };
+        vi.mocked(getCodeAssistServer).mockReturnValue(
+          // eslint-disable-next-line @typescript-eslint/no-explicit-any
+          mockCodeAssistServer as any,
+        );
+        vi.mocked(fetchAdminControlsOnce).mockResolvedValue(mockAdminSettings);
+
+        await loadConfig(mockSettings, mockExtensionLoader, taskId);
+
+        expect(fetchAdminControlsOnce).toHaveBeenCalledWith(
+          mockCodeAssistServer,
+          true,
+        );
+        expect(Config).toHaveBeenLastCalledWith(
+          expect.objectContaining({
+            disableYoloMode: !mockAdminSettings.strictModeDisabled,
+            mcpEnabled: mockAdminSettings.mcpSetting?.mcpEnabled,
+            extensionsEnabled: undefined,
+          }),
+        );
+      });
+    });
   });
 
-  it('should enable checkpointing if git is installed', async () => {
-    mockVerifyGitAvailability.mockResolvedValue(true);
+  it('should set customIgnoreFilePaths when CUSTOM_IGNORE_FILE_PATHS env var is present', async () => {
+    const testPath = '/tmp/ignore';
+    process.env['CUSTOM_IGNORE_FILE_PATHS'] = testPath;
+    const config = await loadConfig(mockSettings, mockExtensionLoader, taskId);
+    // eslint-disable-next-line @typescript-eslint/no-explicit-any
+    expect((config as any).fileFiltering.customIgnoreFilePaths).toEqual([
+      testPath,
+    ]);
+  });
 
-    await loadConfig(
-      mockSettings as unknown as Settings,
-      mockExtensionLoader,
-      'test-task',
-    );
+  it('should set customIgnoreFilePaths when settings.fileFiltering.customIgnoreFilePaths is present', async () => {
+    const testPath = '/settings/ignore';
+    const settings: Settings = {
+      fileFiltering: {
+        customIgnoreFilePaths: [testPath],
+      },
+    };
+    const config = await loadConfig(settings, mockExtensionLoader, taskId);
+    // eslint-disable-next-line @typescript-eslint/no-explicit-any
+    expect((config as any).fileFiltering.customIgnoreFilePaths).toEqual([
+      testPath,
+    ]);
+  });
 
-    expect(mockConfigConstructor).toHaveBeenCalledWith(
-      expect.objectContaining({
-        checkpointing: true,
-      }),
-    );
+  it('should merge customIgnoreFilePaths from settings and env var', async () => {
+    const envPath = '/env/ignore';
+    const settingsPath = '/settings/ignore';
+    process.env['CUSTOM_IGNORE_FILE_PATHS'] = envPath;
+    const settings: Settings = {
+      fileFiltering: {
+        customIgnoreFilePaths: [settingsPath],
+      },
+    };
+    const config = await loadConfig(settings, mockExtensionLoader, taskId);
+    // eslint-disable-next-line @typescript-eslint/no-explicit-any
+    expect((config as any).fileFiltering.customIgnoreFilePaths).toEqual([
+      settingsPath,
+      envPath,
+    ]);
+  });
+
+  it('should split CUSTOM_IGNORE_FILE_PATHS using system delimiter', async () => {
+    const paths = ['/path/one', '/path/two'];
+    process.env['CUSTOM_IGNORE_FILE_PATHS'] = paths.join(path.delimiter);
+    const config = await loadConfig(mockSettings, mockExtensionLoader, taskId);
+    // eslint-disable-next-line @typescript-eslint/no-explicit-any
+    expect((config as any).fileFiltering.customIgnoreFilePaths).toEqual(paths);
+  });
+
+  it('should have empty customIgnoreFilePaths when both are missing', async () => {
+    const config = await loadConfig(mockSettings, mockExtensionLoader, taskId);
+    // eslint-disable-next-line @typescript-eslint/no-explicit-any
+    expect((config as any).fileFiltering.customIgnoreFilePaths).toEqual([]);
+  });
+
+  it('should initialize FileDiscoveryService with correct options', async () => {
+    const testPath = '/tmp/ignore';
+    process.env['CUSTOM_IGNORE_FILE_PATHS'] = testPath;
+    const settings: Settings = {
+      fileFiltering: {
+        respectGitIgnore: false,
+      },
+    };
+
+    await loadConfig(settings, mockExtensionLoader, taskId);
+
+    expect(FileDiscoveryService).toHaveBeenCalledWith(expect.any(String), {
+      respectGitIgnore: false,
+      respectGeminiIgnore: undefined,
+      customIgnoreFilePaths: [testPath],
+    });
   });
 });

packages/a2a-server/src/config/config.ts

@@ -24,6 +24,9 @@ import {
   PREVIEW_GEMINI_MODEL,
   homedir,
   GitService,
+  fetchAdminControlsOnce,
+  getCodeAssistServer,
+  ExperimentFlags,
 } from '@google/gemini-cli-core';
 
 import { logger } from '../utils/logger.js';
@@ -86,8 +89,15 @@ export async function loadConfig(
     // Git-aware file filtering settings
     fileFiltering: {
       respectGitIgnore: settings.fileFiltering?.respectGitIgnore,
+      respectGeminiIgnore: settings.fileFiltering?.respectGeminiIgnore,
       enableRecursiveFileSearch:
         settings.fileFiltering?.enableRecursiveFileSearch,
+      customIgnoreFilePaths: [
+        ...(settings.fileFiltering?.customIgnoreFilePaths || []),
+        ...(process.env['CUSTOM_IGNORE_FILE_PATHS']
+          ? process.env['CUSTOM_IGNORE_FILE_PATHS'].split(path.delimiter)
+          : []),
+      ],
     },
     ideMode: false,
     folderTrust,
@@ -97,9 +107,14 @@ export async function loadConfig(
     previewFeatures: settings.general?.previewFeatures,
     interactive: true,
     enableInteractiveShell: true,
+    ptyInfo: 'auto',
   };
 
-  const fileService = new FileDiscoveryService(workspaceDir);
+  const fileService = new FileDiscoveryService(workspaceDir, {
+    respectGitIgnore: configParams?.fileFiltering?.respectGitIgnore,
+    respectGeminiIgnore: configParams?.fileFiltering?.respectGeminiIgnore,
+    customIgnoreFilePaths: configParams?.fileFiltering?.customIgnoreFilePaths,
+  });
   const { memoryContent, fileCount, filePaths } =
     await loadServerHierarchicalMemory(
       workspaceDir,
@@ -112,37 +127,50 @@ export async function loadConfig(
   configParams.userMemory = memoryContent;
   configParams.geminiMdFileCount = fileCount;
   configParams.geminiMdFilePaths = filePaths;
-  const config = new Config({
+
+  // Set an initial config to use to get a code assist server.
+  // This is needed to fetch admin controls.
+  const initialConfig = new Config({
     ...configParams,
   });
+
+  const codeAssistServer = getCodeAssistServer(initialConfig);
+
+  const adminControlsEnabled =
+    initialConfig.getExperiments()?.flags[ExperimentFlags.ENABLE_ADMIN_CONTROLS]
+      ?.boolValue ?? false;
+
+  // Initialize final config parameters to the previous parameters.
+  // If no admin controls are needed, these will be used as-is for the final
+  // config.
+  const finalConfigParams = { ...configParams };
+  if (adminControlsEnabled) {
+    const adminSettings = await fetchAdminControlsOnce(
+      codeAssistServer,
+      adminControlsEnabled,
+    );
+
+    // Admin settings are able to be undefined if unset, but if any are present,
+    // we should initialize them all.
+    // If any are present, undefined settings should be treated as if they were
+    // set to false.
+    // If NONE are present, disregard admin settings entirely, and pass the
+    // final config as is.
+    if (Object.keys(adminSettings).length !== 0) {
+      finalConfigParams.disableYoloMode = !adminSettings.strictModeDisabled;
+      finalConfigParams.mcpEnabled = adminSettings.mcpSetting?.mcpEnabled;
+      finalConfigParams.extensionsEnabled =
+        adminSettings.cliFeatureSetting?.extensionsSetting?.extensionsEnabled;
+    }
+  }
+
+  const config = new Config(finalConfigParams);
+
   // Needed to initialize ToolRegistry, and git checkpointing if enabled
   await config.initialize();
   startupProfiler.flush(config);
 
-  if (process.env['USE_CCPA']) {
-    logger.info('[Config] Using CCPA Auth:');
-    try {
-      if (adcFilePath) {
-        path.resolve(adcFilePath);
-      }
-    } catch (e) {
-      logger.error(
-        `[Config] USE_CCPA env var is true but unable to resolve GOOGLE_APPLICATION_CREDENTIALS file path ${adcFilePath}. Error ${e}`,
-      );
-    }
-    await config.refreshAuth(AuthType.LOGIN_WITH_GOOGLE);
-    logger.info(
-      `[Config] GOOGLE_CLOUD_PROJECT: ${process.env['GOOGLE_CLOUD_PROJECT']}`,
-    );
-  } else if (process.env['GEMINI_API_KEY']) {
-    logger.info('[Config] Using Gemini API Key');
-    await config.refreshAuth(AuthType.USE_GEMINI);
-  } else {
-    const errorMessage =
-      '[Config] Unable to set GeneratorConfig. Please provide a GEMINI_API_KEY or set USE_CCPA.';
-    logger.error(errorMessage);
-    throw new Error(errorMessage);
-  }
+  await refreshAuthentication(config, adcFilePath, 'Config');
 
   return config;
 }
@@ -210,3 +238,33 @@ function findEnvFile(startDir: string): string | null {
     currentDir = parentDir;
   }
 }
+
+async function refreshAuthentication(
+  config: Config,
+  adcFilePath: string | undefined,
+  logPrefix: string,
+): Promise<void> {
+  if (process.env['USE_CCPA']) {
+    logger.info(`[${logPrefix}] Using CCPA Auth:`);
+    try {
+      if (adcFilePath) {
+        path.resolve(adcFilePath);
+      }
+    } catch (e) {
+      logger.error(
+        `[${logPrefix}] USE_CCPA env var is true but unable to resolve GOOGLE_APPLICATION_CREDENTIALS file path ${adcFilePath}. Error ${e}`,
+      );
+    }
+    await config.refreshAuth(AuthType.LOGIN_WITH_GOOGLE);
+    logger.info(
+      `[${logPrefix}] GOOGLE_CLOUD_PROJECT: ${process.env['GOOGLE_CLOUD_PROJECT']}`,
+    );
+  } else if (process.env['GEMINI_API_KEY']) {
+    logger.info(`[${logPrefix}] Using Gemini API Key`);
+    await config.refreshAuth(AuthType.USE_GEMINI);
+  } else {
+    const errorMessage = `[${logPrefix}] Unable to set GeneratorConfig. Please provide a GEMINI_API_KEY or set USE_CCPA.`;
+    logger.error(errorMessage);
+    throw new Error(errorMessage);
+  }
+}

packages/a2a-server/src/config/settings.ts

@@ -38,7 +38,9 @@ export interface Settings {
   // Git-aware file filtering settings
   fileFiltering?: {
     respectGitIgnore?: boolean;
+    respectGeminiIgnore?: boolean;
     enableRecursiveFileSearch?: boolean;
+    customIgnoreFilePaths?: string[];
   };
 }
 

packages/cli/GEMINI.md

@@ -0,0 +1,15 @@
+## React & Ink (CLI UI)
+
+- **Side Effects**: Use reducers for complex state transitions; avoid `setState`
+  triggers in callbacks.
+- Always fix react-hooks/exhaustive-deps lint errors by adding the missing
+  dependencies.
+- **Shortcuts**: only define keyboard shortcuts in
+  `packages/cli/src/config/keyBindings.ts
+
+## Testing
+
+- **Utilities**: Use `renderWithProviders` and `waitFor` from
+  `packages/cli/src/test-utils/`.
+- **Snapshots**: Use `toMatchSnapshot()` to verify Ink output.
+- **Mocks**: Use mocks as sparingly as possilble.

packages/cli/examples/ask-user-dialog-demo.tsx

@@ -0,0 +1,102 @@
+/**
+ * @license
+ * Copyright 2026 Google LLC
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+import { useState } from 'react';
+import { render, Box, Text } from 'ink';
+import { AskUserDialog } from '../src/ui/components/AskUserDialog.js';
+import { KeypressProvider } from '../src/ui/contexts/KeypressContext.js';
+import { QuestionType, type Question } from '@google/gemini-cli-core';
+
+const DEMO_QUESTIONS: Question[] = [
+  {
+    question: 'What type of project are you building?',
+    header: 'Project Type',
+    options: [
+      { label: 'Web Application', description: 'React, Next.js, or similar' },
+      { label: 'CLI Tool', description: 'Command-line interface with Node.js' },
+      { label: 'Library', description: 'NPM package or shared utility' },
+    ],
+    multiSelect: false,
+  },
+  {
+    question: 'Which features should be enabled?',
+    header: 'Features',
+    options: [
+      { label: 'TypeScript', description: 'Add static typing' },
+      { label: 'ESLint', description: 'Add linting and formatting' },
+      { label: 'Unit Tests', description: 'Add Vitest setup' },
+      { label: 'CI/CD', description: 'Add GitHub Actions' },
+    ],
+    multiSelect: true,
+  },
+  {
+    question: 'What is the project name?',
+    header: 'Name',
+    type: QuestionType.TEXT,
+    placeholder: 'my-awesome-project',
+  },
+  {
+    question: 'Initialize git repository?',
+    header: 'Git',
+    type: QuestionType.YESNO,
+  },
+];
+
+const Demo = () => {
+  const [result, setResult] = useState<null | { [key: string]: string }>(null);
+  const [cancelled, setCancelled] = useState(false);
+
+  if (cancelled) {
+    return (
+      <Box padding={1}>
+        <Text color="red">
+          Dialog was cancelled. Project initialization aborted.
+        </Text>
+      </Box>
+    );
+  }
+
+  if (result) {
+    return (
+      <Box
+        flexDirection="column"
+        padding={1}
+        borderStyle="single"
+        borderColor="green"
+      >
+        <Text bold color="green">
+          Success! Project Configuration:
+        </Text>
+        {DEMO_QUESTIONS.map((q, i) => (
+          <Box key={i} marginTop={1}>
+            <Text color="gray">{q.header}: </Text>
+            <Text>{result[i] || '(not answered)'}</Text>
+          </Box>
+        ))}
+        <Box marginTop={1}>
+          <Text color="dim">Press Ctrl+C to exit</Text>
+        </Box>
+      </Box>
+    );
+  }
+
+  return (
+    <KeypressProvider>
+      <Box padding={1} flexDirection="column">
+        <Text bold marginBottom={1}>
+          AskUserDialog Demo
+        </Text>
+        <AskUserDialog
+          questions={DEMO_QUESTIONS}
+          onSubmit={setResult}
+          onCancel={() => setCancelled(true)}
+        />
+      </Box>
+    </KeypressProvider>
+  );
+};
+
+render(<Demo />);

packages/cli/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@google/gemini-cli",
-  "version": "0.27.0-nightly.20260121.97aac696f",
+  "version": "0.29.0-nightly.20260203.71f46f116",
   "description": "Gemini CLI",
   "license": "Apache-2.0",
   "repository": {
@@ -26,7 +26,7 @@
     "dist"
   ],
   "config": {
-    "sandboxImageUri": "us-docker.pkg.dev/gemini-code-dev/gemini-cli/sandbox:0.27.0-nightly.20260121.97aac696f"
+    "sandboxImageUri": "us-docker.pkg.dev/gemini-code-dev/gemini-cli/sandbox:0.29.0-nightly.20260203.71f46f116"
   },
   "dependencies": {
     "@agentclientprotocol/sdk": "^0.12.0",
@@ -40,13 +40,13 @@
     "color-convert": "^2.0.1",
     "command-exists": "^1.2.9",
     "comment-json": "^4.2.5",
-    "diff": "^7.0.0",
+    "diff": "^8.0.3",
     "dotenv": "^17.1.0",
     "extract-zip": "^2.0.1",
     "fzf": "^0.5.2",
     "glob": "^12.0.0",
     "highlight.js": "^11.11.1",
-    "ink": "npm:@jrichman/ink@6.4.7",
+    "ink": "npm:@jrichman/ink@6.4.8",
     "ink-gradient": "^3.0.0",
     "ink-spinner": "^5.0.0",
     "latest-version": "^9.0.0",
@@ -73,7 +73,6 @@
     "@google/gemini-cli-test-utils": "file:../test-utils",
     "@types/archiver": "^6.0.3",
     "@types/command-exists": "^1.2.3",
-    "@types/diff": "^7.0.2",
     "@types/dotenv": "^6.1.1",
     "@types/node": "^20.11.24",
     "@types/react": "^19.2.0",

packages/cli/src/commands/extensions/configure.test.ts

@@ -22,6 +22,7 @@ import {
   type ExtensionSetting,
 } from '../../config/extensions/extensionSettings.js';
 import prompts from 'prompts';
+import * as fs from 'node:fs';
 
 const {
   mockExtensionManager,
@@ -79,11 +80,15 @@ vi.mock('../../config/settings.js', () => ({
 }));
 
 describe('extensions configure command', () => {
+  let tempWorkspaceDir: string;
+
   beforeEach(() => {
     vi.spyOn(debugLogger, 'log');
     vi.spyOn(debugLogger, 'error');
     vi.clearAllMocks();
 
+    tempWorkspaceDir = fs.mkdtempSync('gemini-cli-test-workspace');
+    vi.spyOn(process, 'cwd').mockReturnValue(tempWorkspaceDir);
     // Default behaviors
     mockLoadSettings.mockReturnValue({ merged: {} });
     mockGetExtensionAndManager.mockResolvedValue({
@@ -141,6 +146,7 @@ describe('extensions configure command', () => {
         'TEST_VAR',
         promptForSetting,
         'user',
+        tempWorkspaceDir,
       );
     });
 
@@ -186,6 +192,7 @@ describe('extensions configure command', () => {
         'VAR_1',
         promptForSetting,
         'user',
+        tempWorkspaceDir,
       );
     });
 

packages/cli/src/commands/extensions/configure.ts

@@ -111,6 +111,7 @@ async function configureSpecificSetting(
     settingKey,
     promptForSetting,
     scope,
+    process.cwd(),
   );
 }
 
@@ -174,6 +175,7 @@ async function configureExtensionSettings(
     extensionConfig,
     extensionId,
     scope,
+    process.cwd(),
   );
 
   let workspaceSettings: Record<string, string> = {};
@@ -182,6 +184,7 @@ async function configureExtensionSettings(
       extensionConfig,
       extensionId,
       ExtensionSettingScope.WORKSPACE,
+      process.cwd(),
     );
   }
 
@@ -216,6 +219,7 @@ async function configureExtensionSettings(
       setting.envVar,
       promptForSetting,
       scope,
+      process.cwd(),
     );
   }
 }

packages/cli/src/commands/extensions/enable.test.ts

@@ -62,6 +62,18 @@ vi.mock('../utils.js', () => ({
   exitCli: vi.fn(),
 }));
 
+const mockEnablementInstance = vi.hoisted(() => ({
+  getDisplayState: vi.fn(),
+  enable: vi.fn(),
+  clearSessionDisable: vi.fn(),
+  autoEnableServers: vi.fn(),
+}));
+vi.mock('../../config/mcp/mcpServerEnablement.js', () => ({
+  McpServerEnablementManager: {
+    getInstance: () => mockEnablementInstance,
+  },
+}));
+
 describe('extensions enable command', () => {
   const mockLoadSettings = vi.mocked(loadSettings);
   const mockExtensionManager = vi.mocked(ExtensionManager);
@@ -75,6 +87,12 @@ describe('extensions enable command', () => {
       .fn()
       .mockResolvedValue(undefined);
     mockExtensionManager.prototype.enableExtension = vi.fn();
+    mockExtensionManager.prototype.getExtensions = vi.fn().mockReturnValue([]);
+    mockEnablementInstance.getDisplayState.mockReset();
+    mockEnablementInstance.enable.mockReset();
+    mockEnablementInstance.clearSessionDisable.mockReset();
+    mockEnablementInstance.autoEnableServers.mockReset();
+    mockEnablementInstance.autoEnableServers.mockResolvedValue([]);
   });
 
   afterEach(() => {
@@ -134,6 +152,50 @@ describe('extensions enable command', () => {
 
       mockCwd.mockRestore();
     });
+
+    it('should auto-enable disabled MCP servers for the extension', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      mockEnablementInstance.autoEnableServers.mockResolvedValue([
+        'test-server',
+      ]);
+      mockExtensionManager.prototype.getExtensions = vi
+        .fn()
+        .mockReturnValue([
+          { name: 'my-extension', mcpServers: { 'test-server': {} } },
+        ]);
+
+      await handleEnable({ name: 'my-extension' });
+
+      expect(mockEnablementInstance.autoEnableServers).toHaveBeenCalledWith([
+        'test-server',
+      ]);
+      expect(emitConsoleLog).toHaveBeenCalledWith(
+        'log',
+        expect.stringContaining("MCP server 'test-server' was disabled"),
+      );
+      mockCwd.mockRestore();
+    });
+
+    it('should not log when MCP servers are already enabled', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      mockEnablementInstance.autoEnableServers.mockResolvedValue([]);
+      mockExtensionManager.prototype.getExtensions = vi
+        .fn()
+        .mockReturnValue([
+          { name: 'my-extension', mcpServers: { 'test-server': {} } },
+        ]);
+
+      await handleEnable({ name: 'my-extension' });
+
+      expect(mockEnablementInstance.autoEnableServers).toHaveBeenCalledWith([
+        'test-server',
+      ]);
+      expect(emitConsoleLog).not.toHaveBeenCalledWith(
+        'log',
+        expect.stringContaining("MCP server 'test-server' was disabled"),
+      );
+      mockCwd.mockRestore();
+    });
   });
 
   describe('enableCommand', () => {

packages/cli/src/commands/extensions/enable.ts

@@ -15,6 +15,7 @@ import {
 } from '@google/gemini-cli-core';
 import { promptForSetting } from '../../config/extensions/extensionSettings.js';
 import { exitCli } from '../utils.js';
+import { McpServerEnablementManager } from '../../config/mcp/mcpServerEnablement.js';
 
 interface EnableArgs {
   name: string;
@@ -37,6 +38,26 @@ export async function handleEnable(args: EnableArgs) {
     } else {
       await extensionManager.enableExtension(args.name, SettingScope.User);
     }
+
+    // Auto-enable any disabled MCP servers for this extension
+    const extension = extensionManager
+      .getExtensions()
+      .find((e) => e.name === args.name);
+
+    if (extension?.mcpServers) {
+      const mcpEnablementManager = McpServerEnablementManager.getInstance();
+      const enabledServers = await mcpEnablementManager.autoEnableServers(
+        Object.keys(extension.mcpServers ?? {}),
+      );
+
+      for (const serverName of enabledServers) {
+        debugLogger.log(
+          `MCP server '${serverName}' was disabled - now enabled.`,
+        );
+      }
+      // Note: No restartServer() - CLI exits immediately, servers load on next session
+    }
+
     if (args.scope) {
       debugLogger.log(
         `Extension "${args.name}" successfully enabled for scope "${args.scope}".`,

packages/cli/src/commands/extensions/examples/context/GEMINI.md

@@ -1,14 +0,0 @@
-# Ink Library Screen Reader Guidance
-
-When building custom components, it's important to keep accessibility in mind.
-While Ink provides the building blocks, ensuring your components are accessible
-will make your CLIs usable by a wider audience.
-
-## General Principles
-
-Provide screen reader-friendly output: Use the useIsScreenReaderEnabled hook to
-detect if a screen reader is active. You can then render a more descriptive
-output for screen reader users. Leverage ARIA props: For components that have a
-specific role (e.g., a checkbox or a button), use the aria-role, aria-state, and
-aria-label props on <Box> and <Text> to provide semantic meaning to screen
-readers.

packages/cli/src/commands/extensions/examples/context/gemini-extension.json

@@ -1,4 +0,0 @@
-{
-  "name": "context-example",
-  "version": "1.0.0"
-}

packages/cli/src/commands/extensions/examples/custom-commands/.gitignore

@@ -0,0 +1,26 @@
+# Dependencies
+node_modules/
+npm-debug.log*
+yarn-error.log
+yarn-debug.log
+
+# Build output
+dist/
+
+# OS metadata
+.DS_Store
+Thumbs.db
+
+# TypeScript
+*.tsbuildinfo
+
+# Environment variables
+.env
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+# IDEs
+.vscode/
+.idea/

packages/cli/src/commands/extensions/examples/exclude-tools/.gitignore

@@ -0,0 +1,26 @@
+# Dependencies
+node_modules/
+npm-debug.log*
+yarn-error.log
+yarn-debug.log
+
+# Build output
+dist/
+
+# OS metadata
+.DS_Store
+Thumbs.db
+
+# TypeScript
+*.tsbuildinfo
+
+# Environment variables
+.env
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+# IDEs
+.vscode/
+.idea/

packages/cli/src/commands/extensions/examples/hooks/.gitignore

@@ -0,0 +1,26 @@
+# Dependencies
+node_modules/
+npm-debug.log*
+yarn-error.log
+yarn-debug.log
+
+# Build output
+dist/
+
+# OS metadata
+.DS_Store
+Thumbs.db
+
+# TypeScript
+*.tsbuildinfo
+
+# Environment variables
+.env
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+# IDEs
+.vscode/
+.idea/

packages/cli/src/commands/extensions/examples/mcp-server/.gitignore

@@ -0,0 +1,26 @@
+# Dependencies
+node_modules/
+npm-debug.log*
+yarn-error.log
+yarn-debug.log
+
+# Build output
+dist/
+
+# OS metadata
+.DS_Store
+Thumbs.db
+
+# TypeScript
+*.tsbuildinfo
+
+# Environment variables
+.env
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+# IDEs
+.vscode/
+.idea/

packages/cli/src/commands/extensions/examples/skills/.gitignore

@@ -0,0 +1,26 @@
+# Dependencies
+node_modules/
+npm-debug.log*
+yarn-error.log
+yarn-debug.log
+
+# Build output
+dist/
+
+# OS metadata
+.DS_Store
+Thumbs.db
+
+# TypeScript
+*.tsbuildinfo
+
+# Environment variables
+.env
+.env.local
+.env.development.local
+.env.test.local
+.env.production.local
+
+# IDEs
+.vscode/
+.idea/

packages/cli/src/commands/extensions/examples/themes-example/README.md

@@ -0,0 +1,28 @@
+# Themes Example
+
+This is an example of a Gemini CLI extension that adds a custom theme.
+
+## How to use
+
+1.  Link this extension:
+
+    ```bash
+    gemini extensions link packages/cli/src/commands/extensions/examples/themes-example
+    ```
+
+2.  Set the theme in your settings file (`~/.gemini/config.yaml`):
+
+    ```yaml
+    ui:
+      theme: 'shades-of-green-theme (themes-example)'
+    ```
+
+    Alternatively, you can set it through the UI by running `gemini` and then
+    typing `/theme` and pressing Enter.
+
+3.  **Observe the Changes:**
+
+    After setting the theme, you should see the changes reflected in the Gemini
+    CLI's UI. The background will be a dark green, the primary text a lighter
+    green, and various other UI elements will display different shades of green,
+    as defined in this extension's `gemini-extension.json` file.

packages/cli/src/commands/extensions/examples/themes-example/gemini-extension.json

@@ -0,0 +1,29 @@
+{
+  "name": "themes-example",
+  "version": "1.0.0",
+  "themes": [
+    {
+      "name": "shades-of-green-theme",
+      "type": "custom",
+      "background": {
+        "primary": "#1a362a"
+      },
+      "text": {
+        "primary": "#a6e3a1",
+        "secondary": "#6e8e7a",
+        "link": "#89e689"
+      },
+      "status": {
+        "success": "#76c076",
+        "warning": "#d9e689",
+        "error": "#b34e4e"
+      },
+      "border": {
+        "default": "#4a6c5a"
+      },
+      "ui": {
+        "comment": "#6e8e7a"
+      }
+    }
+  ]
+}

packages/cli/src/commands/extensions/list.test.ts

@@ -78,6 +78,17 @@ describe('extensions list command', () => {
       mockCwd.mockRestore();
     });
 
+    it('should output empty JSON array if no extensions are installed and output-format is json', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      mockExtensionManager.prototype.loadExtensions = vi
+        .fn()
+        .mockResolvedValue([]);
+      await handleList({ outputFormat: 'json' });
+
+      expect(emitConsoleLog).toHaveBeenCalledWith('log', '[]');
+      mockCwd.mockRestore();
+    });
+
     it('should list all installed extensions', async () => {
       const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
       const extensions = [
@@ -99,6 +110,24 @@ describe('extensions list command', () => {
       mockCwd.mockRestore();
     });
 
+    it('should list all installed extensions in JSON format', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      const extensions = [
+        { name: 'ext1', version: '1.0.0' },
+        { name: 'ext2', version: '2.0.0' },
+      ];
+      mockExtensionManager.prototype.loadExtensions = vi
+        .fn()
+        .mockResolvedValue(extensions);
+      await handleList({ outputFormat: 'json' });
+
+      expect(emitConsoleLog).toHaveBeenCalledWith(
+        'log',
+        JSON.stringify(extensions, null, 2),
+      );
+      mockCwd.mockRestore();
+    });
+
     it('should log an error message and exit with code 1 when listing fails', async () => {
       const mockProcessExit = vi
         .spyOn(process, 'exit')
@@ -130,11 +159,35 @@ describe('extensions list command', () => {
       expect(command.describe).toBe('Lists installed extensions.');
     });
 
-    it('handler should call handleList', async () => {
+    it('builder should have output-format option', () => {
+      const mockYargs = {
+        option: vi.fn().mockReturnThis(),
+      };
+      (
+        command.builder as unknown as (
+          yargs: typeof mockYargs,
+        ) => typeof mockYargs
+      )(mockYargs);
+      expect(mockYargs.option).toHaveBeenCalledWith('output-format', {
+        alias: 'o',
+        type: 'string',
+        describe: 'The format of the CLI output.',
+        choices: ['text', 'json'],
+        default: 'text',
+      });
+    });
+
+    it('handler should call handleList with parsed arguments', async () => {
       mockExtensionManager.prototype.loadExtensions = vi
         .fn()
         .mockResolvedValue([]);
-      await (command.handler as () => Promise<void>)();
+      await (
+        command.handler as unknown as (args: {
+          'output-format': string;
+        }) => Promise<void>
+      )({
+        'output-format': 'json',
+      });
       expect(mockExtensionManager.prototype.loadExtensions).toHaveBeenCalled();
     });
   });

packages/cli/src/commands/extensions/list.ts

@@ -13,7 +13,7 @@ import { loadSettings } from '../../config/settings.js';
 import { promptForSetting } from '../../config/extensions/extensionSettings.js';
 import { exitCli } from '../utils.js';
 
-export async function handleList() {
+export async function handleList(options?: { outputFormat?: 'text' | 'json' }) {
   try {
     const workspaceDir = process.cwd();
     const extensionManager = new ExtensionManager({
@@ -24,16 +24,25 @@ export async function handleList() {
     });
     const extensions = await extensionManager.loadExtensions();
     if (extensions.length === 0) {
-      debugLogger.log('No extensions installed.');
+      if (options?.outputFormat === 'json') {
+        debugLogger.log('[]');
+      } else {
+        debugLogger.log('No extensions installed.');
+      }
       return;
     }
-    debugLogger.log(
-      extensions
-        .map((extension, _): string =>
-          extensionManager.toOutputString(extension),
-        )
-        .join('\n\n'),
-    );
+
+    if (options?.outputFormat === 'json') {
+      debugLogger.log(JSON.stringify(extensions, null, 2));
+    } else {
+      debugLogger.log(
+        extensions
+          .map((extension, _): string =>
+            extensionManager.toOutputString(extension),
+          )
+          .join('\n\n'),
+      );
+    }
   } catch (error) {
     debugLogger.error(getErrorMessage(error));
     process.exit(1);
@@ -43,9 +52,18 @@ export async function handleList() {
 export const listCommand: CommandModule = {
   command: 'list',
   describe: 'Lists installed extensions.',
-  builder: (yargs) => yargs,
-  handler: async () => {
-    await handleList();
+  builder: (yargs) =>
+    yargs.option('output-format', {
+      alias: 'o',
+      type: 'string',
+      describe: 'The format of the CLI output.',
+      choices: ['text', 'json'],
+      default: 'text',
+    }),
+  handler: async (argv) => {
+    await handleList({
+      outputFormat: argv['output-format'] as 'text' | 'json',
+    });
     await exitCli();
   },
 };

packages/cli/src/commands/extensions/update.test.ts

@@ -24,6 +24,7 @@ import { ExtensionUpdateState } from '../../ui/state/extensions.js';
 
 // Mock dependencies
 const emitConsoleLog = vi.hoisted(() => vi.fn());
+const emitFeedback = vi.hoisted(() => vi.fn());
 const debugLogger = vi.hoisted(() => ({
   log: vi.fn((message, ...args) => {
     emitConsoleLog('log', format(message, ...args));
@@ -40,6 +41,7 @@ vi.mock('@google/gemini-cli-core', async (importOriginal) => {
     ...actual,
     coreEvents: {
       emitConsoleLog,
+      emitFeedback,
     },
     debugLogger,
   };
@@ -84,6 +86,42 @@ describe('extensions update command', () => {
   });
 
   describe('handleUpdate', () => {
+    it('should list installed extensions when requested extension is not found', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      const extensions = [
+        { name: 'ext1', version: '1.0.0' },
+        { name: 'ext2', version: '2.0.0' },
+      ];
+      mockExtensionManager.prototype.loadExtensions = vi
+        .fn()
+        .mockResolvedValue(extensions);
+
+      await handleUpdate({ name: 'missing-extension' });
+
+      expect(emitFeedback).toHaveBeenCalledWith(
+        'error',
+        'Extension "missing-extension" not found.\n\nInstalled extensions:\next1 (1.0.0)\next2 (2.0.0)\n\nRun "gemini extensions list" for details.',
+      );
+      expect(mockUpdateExtension).not.toHaveBeenCalled();
+      mockCwd.mockRestore();
+    });
+
+    it('should log a helpful message when no extensions are installed and requested extension is not found', async () => {
+      const mockCwd = vi.spyOn(process, 'cwd').mockReturnValue('/test/dir');
+      mockExtensionManager.prototype.loadExtensions = vi
+        .fn()
+        .mockResolvedValue([]);
+
+      await handleUpdate({ name: 'missing-extension' });
+
+      expect(emitFeedback).toHaveBeenCalledWith(
+        'error',
+        'Extension "missing-extension" not found.\n\nNo extensions installed.',
+      );
+      expect(mockUpdateExtension).not.toHaveBeenCalled();
+      mockCwd.mockRestore();
+    });
+
     it.each([
       {
         state: ExtensionUpdateState.UPDATE_AVAILABLE,

packages/cli/src/commands/extensions/update.ts

@@ -14,7 +14,7 @@ import {
 import { checkForExtensionUpdate } from '../../config/extensions/github.js';
 import { getErrorMessage } from '../../utils/errors.js';
 import { ExtensionUpdateState } from '../../ui/state/extensions.js';
-import { debugLogger } from '@google/gemini-cli-core';
+import { coreEvents, debugLogger } from '@google/gemini-cli-core';
 import { ExtensionManager } from '../../config/extension-manager.js';
 import { requestConsentNonInteractive } from '../../config/extensions/consent.js';
 import { loadSettings } from '../../config/settings.js';
@@ -46,7 +46,21 @@ export async function handleUpdate(args: UpdateArgs) {
         (extension) => extension.name === args.name,
       );
       if (!extension) {
-        debugLogger.log(`Extension "${args.name}" not found.`);
+        if (extensions.length === 0) {
+          coreEvents.emitFeedback(
+            'error',
+            `Extension "${args.name}" not found.\n\nNo extensions installed.`,
+          );
+          return;
+        }
+
+        const installedExtensions = extensions
+          .map((extension) => `${extension.name} (${extension.version})`)
+          .join('\n');
+        coreEvents.emitFeedback(
+          'error',
+          `Extension "${args.name}" not found.\n\nInstalled extensions:\n${installedExtensions}\n\nRun "gemini extensions list" for details.`,
+        );
         return;
       }
       if (!extension.installMetadata) {
@@ -63,7 +77,6 @@ export async function handleUpdate(args: UpdateArgs) {
         debugLogger.log(`Extension "${args.name}" is already up to date.`);
         return;
       }
-      // TODO(chrstnb): we should list extensions if the requested extension is not installed.
       const updatedExtensionInfo = (await updateExtension(
         extension,
         extensionManager,

packages/cli/src/commands/extensions/utils.ts

@@ -8,7 +8,10 @@ import { ExtensionManager } from '../../config/extension-manager.js';
 import { promptForSetting } from '../../config/extensions/extensionSettings.js';
 import { loadSettings } from '../../config/settings.js';
 import { requestConsentNonInteractive } from '../../config/extensions/consent.js';
-import { debugLogger } from '@google/gemini-cli-core';
+import {
+  debugLogger,
+  type ResolvedExtensionSetting,
+} from '@google/gemini-cli-core';
 
 export async function getExtensionManager() {
   const workspaceDir = process.cwd();
@@ -35,3 +38,15 @@ export async function getExtensionAndManager(name: string) {
 
   return { extension, extensionManager };
 }
+
+export function getFormattedSettingValue(
+  setting: ResolvedExtensionSetting,
+): string {
+  if (!setting.value) {
+    return '[not set]';
+  }
+  if (setting.sensitive) {
+    return '***';
+  }
+  return setting.value;
+}

packages/cli/src/commands/mcp.test.ts

@@ -61,7 +61,7 @@ describe('mcp command', () => {
 
     (mcpCommand.builder as (y: Argv) => Argv)(mockYargs as unknown as Argv);
 
-    expect(mockYargs.command).toHaveBeenCalledTimes(3);
+    expect(mockYargs.command).toHaveBeenCalledTimes(5);
 
     // Verify that the specific subcommands are registered
     const commandCalls = mockYargs.command.mock.calls;
@@ -70,6 +70,8 @@ describe('mcp command', () => {
     expect(commandNames).toContain('add <name> <commandOrUrl> [args...]');
     expect(commandNames).toContain('remove <name>');
     expect(commandNames).toContain('list');
+    expect(commandNames).toContain('enable <name>');
+    expect(commandNames).toContain('disable <name>');
 
     expect(mockYargs.demandCommand).toHaveBeenCalledWith(
       1,

packages/cli/src/commands/mcp.ts

@@ -9,6 +9,7 @@ import type { CommandModule, Argv } from 'yargs';
 import { addCommand } from './mcp/add.js';
 import { removeCommand } from './mcp/remove.js';
 import { listCommand } from './mcp/list.js';
+import { enableCommand, disableCommand } from './mcp/enableDisable.js';
 import { initializeOutputListenersAndFlush } from '../gemini.js';
 import { defer } from '../deferred.js';
 
@@ -24,6 +25,8 @@ export const mcpCommand: CommandModule = {
       .command(defer(addCommand, 'mcp'))
       .command(defer(removeCommand, 'mcp'))
       .command(defer(listCommand, 'mcp'))
+      .command(defer(enableCommand, 'mcp'))
+      .command(defer(disableCommand, 'mcp'))
       .demandCommand(1, 'You need at least one command before continuing.')
       .version(false),
   handler: () => {